Acer XB283KKV Manual

Acer Skærm XB283KKV

Læs gratis den danske manual til Acer XB283KKV (3 sider) i kategorien Skærm. Denne vejledning er vurderet som hjælpsom af 19 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 10 anmeldelser. Har du et spørgsmål om Acer XB283KKV, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/3

English

Acer LCD Monitor Quick Start Guide (QSG)

Important safety instructions

Please read the following instructions carefully.

1. To clean the LCD monitor screen:

• Turn o󰀨 the LCD monitor and unplug the power cord.

• Spray a non-solvent cleaning solution onto a rag and clean the screen gently.

2. Do not place the LCD monitor near a window. Exposing the monitor to rain, moisture or sunlight can severely damage

it.

3. Do not apply pressure to the LCD screen. Excessive pressure may cause permanent damage to the display.

4. Do not remove the cover or attempt to service this unit yourself. An authorized technician should perform servicing of

any nature.

5. Store the LCD monitor in a room with a temperature of -20° to 60° C (-4° to140° F). Storing the LCD monitor outside

this range may result in permanent damage.

6. Immediately unplug your monitor and call an authorized technician if any of the following circumstances occur:

• Monitor-to-PC signal cable is frayed or damaged.

• Liquid spills onto the LCD monitor or the monitor is exposed to rain.

• The LCD monitor or case is damaged.

Attaching the monitor to the base

1. Remove the monitor from the packaging.

2. Attach the footstand to the base. (for selected models).

3. Turn clockwise to lock. Ensure that the base in locked onto the stand. (for selected models)

4. Secure the base to the stand by turning the screw using the intergrated tab or a suitable coin. (for selected models)

Connecting your monitor to a computer

1. Turn o󰀨 your computer and unplug your computer's power cord.

2. Connect the signal cable to the DP (optional) and/or HDMI (optional)

input socket of the monitor, and the DP(optional) and/or HDMI

(optional) output socket of the graphics card on the computer.

3. USB Type C Cable (Optional, USB Type C input models only)

Connect one end of the USB type C cable (optional) to your

computer and connect the other end to your electric devices.

4. Connect the USB Cable(Optional)

Connect the USB cable to port for fast charge.

Connect the USB cable to port.

5. Insert the monitor power cable into the power port at the back of the

monitor.

6. Connect the power adapter and power cord to the monitor, then to a

properly grounded AC outlet.

USB

HDMI1 HDMI2

USB Type C

DP IN

Note: Audio output is only for audio output model. Please check user

manual for more instruction.

Transmitting the 4K 144Hz signal via one HDMI 2.1/DP port req1.4 uires

DSC (Display Stream Compression) functionality.

AdaptiveSync:

It can allow a AdaptiveSync supported graphics source to dynamically adjust display refresh rate based on typical content

frame rates for power e󰀩cient, virtually stutter free and low-latency display update.

English

External controls

1 Power button Turns the monitor on/o󰀨.Blue indicates power on. Amber indicates standby/ power

saving modee/OSD locked.

2 Function key

a. Press to view Main page. Press again to enter hotkey1 function.

b. When the Function Menu is active, press this key to view the basic

information for your monitor and current input or reset the custom color

settings to the factory defaults.

3 Function key

a. Press to view Main page.Press again to enter hotkey2 function.

b. When the Function Menu is active, press this button to select select scenario

mode or game mode .

4 Function key

a. Press to view Main page.Press again to enter Input select function.

b. When the Function Menu is active, this button will quit the OSD.

5 Function key

a. Press to view Main page.Press again to enter next function in the Function

Menu.

b. The single toggle button on the backside of the Display bezel operates like

a joystick. To move the cursor, simply toggle the button in four directions.

Press the button to select desired option.Red indicates operable. Dark gray

indicates inoperable.

Note: Acer monitor is purposed for video and visual display of information obtained from electronic devices.

Regulations and safety notices

FCC notices

This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device

generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular

installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the

device o󰀨 and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the device and receiver.

• Connect the device into an outlet on a circuit di󰀨erent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/television technician for help.

CE declaration of conformity

Hereby, Acer Inc., declares that this LCD monitor is in compliance with the essential requirements and other relevant provisions of

EMC Directive 2014/30/EU, Low Voltage Directive 2014/35/EU, and RoHS Directive 2011/65/EU and Directive 2009/125/EC with

regard to establishing a framework for the setting of ecodesign requirements for energy-related product.

Notice: Shielded cables

All connections to other computing devices must be made using shielded cables to maintain compliance with EMC regulations.

Notice: Peripheral devices

Only peripherals (input/output devices, terminals, printers, etc.) certied to comply with the Class B limits may be attached to this

equipment. Operation with non-certied peripherals is likely to result in interference to radio and TV reception.

Caution

Changes or modications not expressly approved by the manufacturer could void the user authority, which is granted by the Federal

Communications Commission, to operate this product.

In order to prevent damage to the monitor, do not lift the monitor by its base.

Operation conditions

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause

harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired

operation.

Produkt Specifikationer

Mærke:	Acer
Kategori:	Skærm
Model:	XB283KKV
Produktfarve:	Sort
Skærm diagonal:	28 "
Skærmopløsning:	3840 x 2160 pixel
Berøringsskærm:	Ingen
HD-type:	4K Ultra HD
Skærmteknologi:	LCD
Naturligt aspektforhold:	16:9
Responstid:	1 ms
Synsvinkel, horisontal:	178 °
Synsvinkel, vertikal:	178 °
Skærm form:	Flad
Indbyggede højttaler(e):	Ja
Antal HDMI-porte:	1
VESA montering:	Ja
Strømforbrug (standby):	- W
Strømforbrug (typisk):	- W
Markedspositionering:	Spil
Kabler inkluderet:	AC,DisplayPort,HDMI,USB,USB Type-C
Energiforbrug (SDR) pr. 1000 timer:	- kWh
Energieffektivitetsklasse (SDR):	F
Energieffektivitetsklasse (HDR):	G
Energiforbrug (HDR) pr. 1000 timer:	- kWh
Energieffektivitetsskala:	A til G
HDMI:	Ja
Billedformat:	16:9
Vis antal farver:	1.073 milliarder farver
Farve:	Sort
Maksimal opdateringshastighed:	- Hz
Skærmens lysstyrke (typisk):	400 cd/m²
Kontrastforhold (dynamisk):	100000000:1
Frontkantfarve:	Sort
Indbygget USB-hub:	Ja
Antal DisplayPorts:	1
Udgang til hovedtelefoner:	Ja
Strømadapter inkluderet:	Ja
Kode for europæisk produktregister for energimærkning (EPREL):	732249