Aiphone JOS-1V Manual

Aiphone Samtaleanlæg JOS-1V

Læs gratis den danske manual til Aiphone JOS-1V (2 sider) i kategorien Samtaleanlæg. Denne vejledning er vurderet som hjælpsom af 54 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 27.5 anmeldelser. Har du et spørgsmål om Aiphone JOS-1V, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

DC POWER SUPPLY FOR INTERCOM

Models;

PS-1820

without AC plug

PS-1820UL

UL/CSA Listed

PS-1820S

CE Listed

INSTALLATION MANUAL

•

Power supply (PS-1820,

PS-1820UL or PS-1820S)

• AC cord & plug (except PS-

1820

)

• Mounting bracket

• Packet of screws

• INSTALLATION MANUAL

Package contents

PRECAUTIONS

Type of plug

varies by model

Grounding

terminal

DC output

terminals

AC cord inlet

Protection

cover

This product is designed exclusively for use with Aiphone Intercom Systems.

- 1 -

Plug configuration

UL LISTED

Usage

North American

AC cord

Nominal voltage

& current rating

120V, 60Hz, 2A min. Universal European 230V, 50Hz, 2A min.

Plug configuration Usage AC cord

Nominal voltage

& current rating

United Kingdom 230V, 50Hz, 2A min.

Australian 240V, 50Hz, 2A min.

North American 240V, 60Hz, 2A min.

1. Do not connect the unit with any non-speciﬁed power source. Fire or electric shock could result.

2. Do not connect any terminal on the unit to an AC power line. Fire or electric shock could result.

Keep AC cord from being marred or crushed. If the AC cord is fractured, ﬁre or electric shock could result.

4. Do not plug or unplug with wet hands. Electric shock could result.

5. Do not short the wires of the DC output together. Fire or electric shock could result.

6. Do not dismantle or alter the unit. Fire or electric shock could result.

7. Periodically check for and remove dust on the power plug. If dust is left, it could cause the power

plug to heat up, resulting in fire.

8. Only use the AC cord included with the unit. Fire or electric shock could result.

9. High voltage is present internally. Do not open the case. Electric shock could result.

10. Do not install or use near gases or flammable materials. The unit is not explosion-proof. Fire or

explosion could result.

11. For PLUGGABLE EQUIPMENT, the socket-outlet shall be installed near the equipment and shall

be easily accessible.

1. Do not install or make any wire terminations while power supply is plugged in. It can cause

electrical shock or damage to the unit.

2. Before plugging in the unit, make sure wires are not crossed or shorted. Fire or electric shock

could result.

3. On products with ground terminals, connect to an earth ground. Fire or malfunction could result.

Do not install the unit in the following locations. Fire, electric shock, or unit trouble could result.

* Places under direct sunlight or places near heating equipment that varies in temperature.

* Places subject to dust, oil, chemicals, hydrogen sulﬁde (hot spring).

Places subject to moisture and humidity extremes, such as bathrooms, cellars, greenhouses, etc.

Places where the temperature is quite low, such as inside a refrigerated area or in front of an air conditioner.

* Places subject to steam or smoke (near heating or cooking surfaces).

Where noise generating devices such as dimmer switches, inverter electrical appliances, are close by.

* Locations subject to frequent vibration or impact.

* Locations subject to extremely powerful electric fields.

* The unit is designed for indoor use only. Do not use outdoor.

If the unit is down or does not operate properly, unplug the power supply.

2. Using a cellular phone or professional-use radio equipment such as transceiver close to the

system may cause a malfunction.

WARNING (Negligence could result in death or serious injury.)

CAUTION (Negligence could result in injury to people or damage to property.)

Prohibited

Do not dismantle unit

General precautions

AC cord requirements (for PS-1820)

• Rating: 125V, 2A (for use with 100-125V AC)

250V, 2A (for use with 200-240V AC)

• Cord length: min. 1.8m (6'), max. 2m (6'7").

• Type: Must comply with requirements set out by the Safety Approval/Certification Organization in each country of use.

• AC cord inlet: Specified EN60320 or equivalent.

• Employ a plug in shape and ratings matched with AC outlet to be used.

Keep unit away from water

GENERAL PRECAUTIONS

Symbol (Symbole) Meaning (Signification)

The voltage and current are the direct current. (La tension et le courant sont le courant continu.)

The voltage and current are the alternate current. (La tension et le courant sont le courant alternatif.)

Double insulation (Double isolation)

Polarity of the terminal (Polarité de la borne)

Functional earth terminal (Borne de terre fonctionnelle)

Meanings of symbols used on the unit surfaces and in the labels are as follows. (La signification des symboles utilisés sur les surfaces de l'appareil et sur les étiquettes est la suivante.)

Meanings of symbols Signification des symboles ( ）

IMPORTANT:

In case your System and/or

Power Supply malfunctions or is

in apparent trouble, unplug the

Power Supply from AC outlet.

Rating label

(Étiquette de

valeurs

nominales)

Produkt Specifikationer

Mærke:	Aiphone
Kategori:	Samtaleanlæg
Model:	JOS-1V
Kode for international beskyttelse (IP):	IP54
Bredde:	230 mm
Dybde:	21 mm
Højde:	130 mm
Vægt:	470 g
Produktfarve:	Stainless steel, White
Skærm diagonal:	7 "
Skærmteknologi:	LCD
Forbindelsesteknologi:	Ledningsført
Højttalertelefon:	Ja
Kan monteres på væggen:	Ja
Sensortype:	CMOS
Farve:	Ja
IK kode:	IK08
Minimumsbelysning:	5 Lux
Optisk sensorstørrelse:	1/4 "
Indendørsenhed boligmateriale:	Plastic, Resin
Indendørsenhed inkluderet:	Ja
Udendørsenhed inkluderet:	Ja
Dørstation driftstemperatur (T-T):	-20 - 60 °C
Dørstation dimensioner (BxDxH):	98 x 27 x 173 mm