Gigabyte GA-8ID Manual

Gigabyte Bundkort GA-8ID

Læs gratis den danske manual til Gigabyte GA-8ID (72 sider) i kategorien Bundkort. Denne vejledning er vurderet som hjælpsom af 19 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 10 anmeldelser. Har du et spørgsmål om Gigabyte GA-8ID, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/72

- 1 -

English

Step

1Installing a CPU and CPU Cooler

A. Installing an Intel CPU (skip this step if the motherboard has a built-in CPU)

•The sequence of installation may differ depending on the type of case and devices used. The

installation instructions below apply to GIGABYTE's desktop systems and are for reference

only.

•Refer to the user's manual included for detailed motherboard specications.

•Before installing the devices, make sure they are compliant with the connectors on your computer.

•Before installing the devices, be sure to turn off the devices and your computer. Unplug the power cord

from the power outlet to prevent damage to the devices and the system components.

•Place the computer system on a stable surface to prevent improper installation resulted from shaking.

•Type B:

Push lever A (closest to the " " marking) down and away from the socket to release it. Then push

lever B (closest to the " " marking) down and away from the socket and lift it. Gently press lever A to

allow the load plate to rise. Open the load plate.

A-1 RefertothefollowinginstructionsbasedonyourCPUspecications:

•Type A:

Lift the CPU socket lever and the metal load plate will be lifted as well.

a. If the protective socket cover is fastened on the CPU socket, remove

itrst.

b. If the protective socket cover is fastened on the metal load plate, do

not remove it at this stage. The socket cover may pop off from the

load plate automatically during the process of re-engaging the lever

after you insert the CPU.

For detailed instructions on installing the CPU, please refer to the user’s manual.

Lever A Lever B

A-2 HoldtheCPUwithyourthumbandindexngers.AligntheCPUpinonemarking(triangle)withthepin

one corner of the CPU socket (or you may align the CPU notches with the socket alignment keys) and

gently insert the CPU into position.

A-3 Once the CPU is properly inserted, replace the load plate and push the CPU socket lever back into its locked position.

Once the type B is properly inserted, carefully replace the load plate. Then secure lever B under its retention

tab. The socket cover may pop off from the load plate during the process of engaging the lever. Finally,

secure lever A under its retention tab to complete the installation of the CPU.

- 2 -

English

C-1 BeforeinstallingtheCPUcooler,pleaserstaddathinlayerof

heat sink paste on the surface of the CPU. Then install the cooler

(refer to the installation manual for your CPU cooler).

C-2 Connect the CPU cooler cable to the CPU_FAN connector located

on the motherboard so that the cooler can properly function to

prevent the CPU from overheating.

C. Installing the CPU Cooler

B. Installing an AMD CPU (skip this step if the motherboard has a built-in CPU)

Note the orientation of the memory module. Spread the retaining clips at both ends

of the memory socket. Place the memory module on the socket. As indicated in the

pictureontheleft,placeyourngersonthetopedgeofthememory,pushdownon

the memory and insert it vertically into the memory socket. The clips at both ends

of the socket will snap into place when the memory module is securely inserted.

Step

2Installing Memory

Step

Preparing the Case and Installing a Power Supply

UsingtheGIGABYTEdesktopsystemasthedemonstrationexample,pleaserst

remove both sides and the lid of the case in order to install the power supply.

Place the power supply in the correct place in the case and secure it with screws.

Installation and placement of the power supply may differ depending on the type

of case used.

To ensure sufcient power can be supplied to your system, it is

recommended that a power supply of good quality be used. If a power

supply is used that does not provide the required power, the result can

lead to an unstable or unbootable system.

•Do not force the CPU into the CPU socket. The CPU cannot t in if oriented incorrectly. Adjust the CPU

orientation if this occurs.

•DO NOT touch socket contacts. To protect the CPU socket, always replace the protective socket cover

when the CPU is not installed.

CPU Socket Lever

Pin 1CPU Socket

B-1 Completely raise the CPU socket lever. Align the CPU pin

one (small triangle marking) with the triangle marking on the

CPU socket and gently insert the CPU into the socket. Make

surethattheCPUpinstperfectlyintotheirholes.

B-2 OncetheCPUispositionedintoitssocket,placeonenger

down on the middle of the CPU, lowering the socket lever

and latching it into the fully locked position.

Produkt Specifikationer

Mærke:	Gigabyte
Kategori:	Bundkort
Model:	GA-8ID

Har du brug for hjælp?

Hvis du har brug for hjælp til Gigabyte GA-8ID stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Bundkort Gigabyte Manualer

Gigabyte B650 Eagle Manual

31 August 2025

Gigabyte B550 Aorus Elite AX V3 Manual

31 August 2025

Gigabyte Z790 D AC Manual

4 August 2025

Gigabyte H610M K V2 Manual

4 August 2025

Gigabyte B650 AORUS ELITE V2 Manual

3 August 2025

Gigabyte Z790 D AX Manual

3 August 2025

Gigabyte GA-Z170M-HERO Manual

3 August 2025

Gigabyte Z790 AORUS ELITE AX ICE Manual

3 August 2025

Gigabyte GA-B250M-DASH Manual

3 August 2025

Gigabyte X670E AORUS PRO X Manual

3 August 2025

Bundkort Manualer

Nyeste Bundkort Manualer

Asrock B850 Challenger WiFi Manual

16 September 2025

ECS ADLN-I3 Manual

16 September 2025

Foxconn A85GM Manual

13 September 2025

Foxconn H87MX Manual

13 September 2025

Asrock W790 WS R2.0 Manual

12 September 2025

Asrock Q670M vPro Manual

12 September 2025

Supermicro M11SDV-4CT-LN4F Manual

11 September 2025

Supermicro X13SAW-TLN4F Manual

11 September 2025

Supermicro X13SCL-F Manual

10 September 2025

Supermicro X11SDC-4C Manual

10 September 2025