Hooker 6075-90267 Manual

Hooker Seng 6075-90267

Læs nedenfor 📖 manual på dansk for Hooker 6075-90267 (1 sider) i kategorien Seng. Denne guide var nyttig for 12 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/1
STEP 1.Attach the threaded bolts (A) into the two threaded holes that are at the
bottom of the posts of Bolt the Headboard and the Footboard. Slide the
Bed Rail onto the two Bolts (A) on one of the bed posts until the Bolts (A)
are visible through the holes on the inside of the Bed Rail.
STEP 2.Slide a Curved Washer (B) and a Nut (C) onto the Bolts (A) through the
holes in the Bed rail. Tighten all the Nuts (C), using the Open Wrench(D).
STEP 3.Assemble the leg supports to the bed slats.
STEP 4.Mount the assembled support slats onto the side rail with screws (E), then
use a Phillips head screwdriver to tighten screws
STEP 1,2
STEP 3
STEP 4


Produkt Specifikationer

Mærke: Hooker
Kategori: Seng
Model: 6075-90267

Har du brug for hjælp?

Hvis du har brug for hjælp til Hooker 6075-90267 stil et spørgsmål nedenfor, og andre brugere vil svare dig