PCE Instruments PCE-LTD 100 Manual

PCE Instruments Måling PCE-LTD 100

Læs gratis den danske manual til PCE Instruments PCE-LTD 100 (2 sider) i kategorien Måling. Denne vejledning er vurderet som hjælpsom af 76 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 38.5 anmeldelser. Har du et spørgsmål om PCE Instruments PCE-LTD 100, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

1、Welcome

Please go through this user manual carefully before operating.

2、R Seady to tart

The shell of this Dry Ice Temperature Data Logger is made of special alloy material, which has

the advantages of high mechanical strength, low temperature resistance, environmental

protection, non-toxic, wear resistance and corrosion resistance. It's very suitable for ultra-low

temperature refrigeration and cold chain transportation.

After finishing the logging, the user only needs to connect the instrument to a computer to

automatically generate an encrypted PDF report. The information showed in the PDF report

includes record summary, statistics, alarm information, charts, et.

User Manual

Data Logger

PCE-LTD 100

7、S R V Dtop ecording and iewing ata

1. The data logger will stop recording when memory is full or connecting with a computer.

2. Plug the data logger into an available USB port on a PC, When a data report is being

generated the LED light will flash. The LED light will stop flashing and keep on after

generating a data report. It may need several seconds (According to logged readings) to

finish. Do not unplug data logger at this time. The time required to generate report is

determined by amount of data generated. Please wait patiently about 10s. When the LED

lamp stops flashing and keeps on, it indicates that record report has been generated. Users

can view or copy generated record report on PC.

3. User can also use PC software to view and analyze the data.

8、LED Indication

1. After finishing configuration and plug out the data logger, LED light will flash. LED light

begins to flash. When logging, the LED will flash once every 5s. When not logging, the LED

will flash twice every 5s. The flashing time is 3 minutes, and within 3 minutes, if temperature

exceeds the range of -20~60 , data logger will still work normally, but LED light will go out ℃

immediately.

2. Plug the data logger into an available USB port on a PC after finishing recording, and data

logger will automatically generate record report. In the process of generating the record

report, LED flashes every 1s. After recording report is generated, the LED light will stop

flashing and stay on.

3、B Iattery nstallation

The standard batteries of this product is 3.6V 2/3 AA battery. Users can purchase batteries

from our company or dealers.

Please refer to the following for battery installati

instruction

5、S Setup and tart

1. Make sure the data logger has been connected to PC USB port.

2. .

Double click PoChain software

3. Click Configure to enter configuration interface. If the configuration interface displays " "

the serial number of the data logger, it indicates that the connection between the device and

the PC is successful.

4. In configuration interface, customer can configure the file format, start time, start delay

time, recording interval, time zone, report title, multi-point calibration, and access password.

customer can also set the alarm limit, alarm type, alarm delay time and temperature units.

Click the Configure to complete the configuration .

" "

5. After finishing configuration, Plug out the data logger. After tightening the lid,

4、S Ioftware nstallation

The PC software used in this recorder can be downloaded from the official website of our

company or obtained from the distributor.

ouble click PoChain.exe", then click Next when you see Welcome to the PoChain setup " " " "

wizard", until the Completing the PoChain setup wizard dialog box appears, click Finish" " " "

to complete installation.

6、S oftware Configuration

1. Channel: Single channel.

2. Parameter: Temperature.

3. High and Low Limit: To set high and low limit and violation events will happen when

exceeding the set data.

4. Accumulation: If unselected, it will be single-type, and alarm will happen after set alarm

delay. And if limit violation events removed before this delay, alarm won't happen. If selected,

it will be accumulation-type, alarm will happen when the total time of the violation events

exceeds the set alarm delay.

5. Alarm Delay When limit violation events happen, alarm will happen after the set alarm :

delay time.

6. Units: / To choose between Centigrade and Fahrenheit temperature℃ ℉ .

7. External probe: This data logger only supports internal temperature probe.

8. File format: The data logger supports to generate pdf, dlg (raw le), csv, xls or txt directly,

and user can select the le type that will be generated, dlg files can be opened and analyzed

with professional software provided by us.

9. Start time: Set when the data logger starts recording .

10. Start delay: This decide start time actually. Data logger will start after the start delay time.

11. Recording interval: Time interval for recording data.

12. Time and Zone: The software automatically updates the time according to the time of the

computer used by the user. User can set time zone according to user's country or region.

13. Change report information: User can modify report title, trip No., and trip description.

14. Password: User can set password for current logger. Once password set, user must input

right password to access.

15. Calibration: This operation affects actual measurement accuracy of data logger. For

place data logger in the specific work environment. The data logger will start

recording acc ording to user's settings.

professional users, this function can be used to recalibrate. Non-professional users must

operate this function under the guidance. Please consult your local distributor for details.

16. Configurate: After finishing all settings, click this option to complete configuration.

PCE Americas Inc.

1201 Jupiter Park Drive

Suite 8

Jupiter

FL-33458

USA

From outside US: +1

Tel: (561) 320-9162

Fax: (561) 320-9176

info@pce-americas.com

www.pce-instruments.com/english

www.pce-instruments.com

PCE Instruments UK Ltd.

Unit 11

Southpoint Business Park

Ensign way

Hampshire / Southampton

United Kingdom, SO31 4RF

From outside UK: +44

Tel: (0) 2380 98703 0

Fax: (0) 2380 98703 9

info@pce-instruments.co.uk

Produkt Specifikationer

Mærke:	PCE Instruments
Kategori:	Måling
Model:	PCE-LTD 100

Har du brug for hjælp?

Hvis du har brug for hjælp til PCE Instruments PCE-LTD 100 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Måling PCE Instruments Manualer

PCE Instruments PCE-P18D Manual

9 December 2025

PCE Instruments PCE-N25S Manual

5 December 2025

PCE Instruments PCE-N24S Manual

3 December 2025

PCE Instruments PCE-CSM 100 Manual

11 November 2025

PCE Instruments PCE-RD 65 Manual

9 November 2025

PCE Instruments PCE-STM 10 Manual

7 November 2025

PCE Instruments PCE-MOV 60 Manual

7 November 2025

PCE Instruments PCE-VOC 5 Manual

7 November 2025

PCE Instruments PCE-P18-2A Manual

6 November 2025

PCE Instruments PCE-HFG 2.5K Manual

5 November 2025

Måling Manualer

Nyeste Måling Manualer

Owon VDS2000 Manual

30 December 2026

Steinberg SBS-LF-115 Manual

30 December 2026

INFICON D-TEK Pro Manual

29 December 2026

Ermenrich Verk LD60 Manual

29 December 2026

MGL Avionics Blaze INFO-2 Manual

29 December 2026

Chauvin Arnoux C.A 6255 Manual

29 December 2026

Ermenrich Report WR40 Manual

29 December 2026

Ermenrich Reel SLR600 PRO Manual

29 December 2026

Sonel KT-128-PRO Manual

28 December 2025

MGL Avionics Blaze FLIGHT-3 Manual

28 December 2025