Sonic Alert SBW100 Sonic Boom Manual

Sonic Alert Sikkerhed SBW100 Sonic Boom

Læs gratis den danske manual til Sonic Alert SBW100 Sonic Boom (6 sider) i kategorien Sikkerhed. Denne vejledning er vurderet som hjælpsom af 19 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 10 anmeldelser. Har du et spørgsmål om Sonic Alert SBW100 Sonic Boom, eller vil du spørge andre brugere om produktet?

Side 1/6
English
Model SBW100
Sonic Boom
OPERATION INSTRUCTIONS
IMPORTANT - Please read these instructions carefully before use and retain for future reference.
- Use only the supplied or recommended Sonic Alert adaptor to connect the unit.
WARNING: To prevent fire or shock hazard do not expose this appliance to rain or moisture.
- The ventilation should not be impeded by covering the ventilation openings with items
such as, newspaper, table cloth, curtains, etc.;
- No naked flame sources, such as lighted candles should be placed on the apparatus.
- It shall not be exposed to dripping or splashing and that no objects filled with liquids,
such as vases, shall be placed on the apparatus.
- Do not place the product in closed bookcases or racks without proper ventilation.
- Where the mains/ power plug is used as the disconnect device, the disconnect device
shall remain readily operable.
GENERAL DATA:
UL listed Power Adaptor: AC100-240V~, 50/60Hz
Adaptor Output: DC5V , 2.2 A
Features
1) PM Indicator
2) Alarm 1 Indicator
3) Alarm 2 Indicator
4) Alarm Mode Switch (AL1, AL2, AL1+AL2)
5) Alarm Off / LAMP on/off
6) Time Set
7) Alarm Set
8) Snooze / Dimmer
9) Fast
10) Slow / Sleep
11) Alarm Function Switch
Test Mode:
1) Press and hold the Snooze (8) and Time (6) buttons for 3 seconds to enter the Test Mode. The
display will show "7ES7" to indicate it is in TEST Mode.
2) If within 1 minute no button is pressed, then it will exit the Test Mode and return back to the
Time Mode.
3) While in Test Mode, sliding the Alarm Function Switch (11) will demonstrate the different
functions of the clock; Buzz, VIB or Buzz & Vib.
4) After finish with the Test Mode, press any button (except the Snooze & Time buttons, which has
no effect) it will exit the Test Mode immediately.
Setting the Correct Time -
1) Press and hold the TIME Button (6) and at the same time press the FAST Button (9)
or the SLOW button (10) to advance clock display until you have desired time.
2) The lighted dot (1) located in upper left corner of the clock display indicates the time is
PM. For AM time, this dot will not light up.
Setting the Alarm Time -
Setting Alarm 1
1) Slide the ALARM MODE SWITCH (4) to AL1 position, the alarm indicator AL1 (2) will
light up.
2) Press and hold the ALARM SET (7) button and at the same time press the FAST
Button (9) or the SLOW button (10) to advance clock display until the desired
alarm setting is reached.
3) Make sure alarm time is correctly set for AM or PM.
Setting Alarm 2
4) Once alarm AL1 has been set, slide ALARM MODE SWITCH (4) to AL2 position, the
alarm indicator AL2 (3) will light up.
5) Press and hold the ALARM SET (7) button and at the same time press the FAST
Button (9) or the SLOW button (10) to advance clock display until you reach desired
alarm setting.
12) Alarm Sound Selector
13) Vibrator Output
14) Tone Wheel
15) USB for Charging
16) AUX Input
17) DC Input
18) Volume Wheel
19) Record / Play


Produkt Specifikationer

Mærke: Sonic Alert
Kategori: Sikkerhed
Model: SBW100 Sonic Boom

Har du brug for hjælp?

Hvis du har brug for hjælp til Sonic Alert SBW100 Sonic Boom stil et spørgsmål nedenfor, og andre brugere vil svare dig