TP-Link Archer TX20E Manual


Læs nedenfor 📖 manual på dansk for TP-Link Archer TX20E (2 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 7 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
Note:
If the bracket is not suitable for your computer, detach it from
the adapter's board and replace it with the low-prole bracket.
Note:
If the Bluetooth USB cable is not correctly connected to the
motherboard, Bluetooth function won’t work even after driver
installation.
2 Connect to a Computer
a. Turn off your computer, unplug the power
cable then remove the case panel.
c.
Locate an available
PCIE
slot ( ) X1, X4 or X16
and carefully insert the adapter.
d. Locate an available connector and F_USB
carefully plug the Bluetooth USB cable into it.
b. Connect the provided Bluetooth USB cable to
the adapter.
WLAN Bluetooth
PCI Express Adapter
Quick Installation Guide
Images may dier from your actual product.
To continue, ip the page over.
Bluetooth USB cable
Adapter
USB
1 Disable Bluetooth
a. Right-click , select , My Computer Manage
go to Device Manager.
b. Expand the Bluetooth node to nd your
existing Bluetooth device.
c. Right-click the existing Bluetooth device
and select .Disable
Note:
Make sure you have disabled all existing Bluetooth
devices (both built-in and third party).
Bluetooth
Device Manager
Disable
Existing Bluetooth Adapter
Before You Start:
If you plan on using Bluetooth and already
have connected Bluetooth devices, proceed
with step 1. Otherwise, skip to step 2.


Produkt Specifikationer

Mærke: TP-Link
Kategori: Ikke kategoriseret
Model: Archer TX20E

Har du brug for hjælp?

Hvis du har brug for hjælp til TP-Link Archer TX20E stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret TP-Link Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer