Walrus Audio Meraki Manual


Læs nedenfor 📖 manual på dansk for Walrus Audio Meraki (7 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 2 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/7
Got questions or need a repair?
Email help@walrusaudio.com to talk with a real human about your Walrus gear!
This product comes with a limited lifetime warranty.
Click Here for more info.
You are about to experience the Meraki. Cozy up and immerse yourself in true stereo
analog delay with eight MN3005 chips to create warm, rich repeats capable of 1200ms
of delay time with parallel, ping-pong and series delay modes. Independently control the
delay times and modulation of the left and right channels to create syncopated repeats or
keep them locked in to the same timing for classic delay sounds.
C ONTROL S
Only use a 9 volt DC, Center Negative, 500mA to power the pedal.
The use of an isolated power supply is recommended for powering all Walrus Audio Pedals.
Daisy chain power supplies are not recommended.
Mix: Adjust the overall level of the repeats in both th
left and right channels. Full Wet/Dry Mix; 50/50 is ar
2 O’Clock. Note: This control adjusts the left and rig
simultaneously.
Feedback Left: Adjust the amount of repeats in the
channel, from a single repeat to full oscillation.
Feedback Right: Adjust the amount of repeats in the
channel, from a single repeat to full oscillation.
Mod (Mod Rate): Use to adjust the depth of modula
the repeats, creating a chorus/vibrato effect.
Hold the Bypass switch and use the Mod knob to ad
the mod rate.


Produkt Specifikationer

Mærke: Walrus Audio
Kategori: Ikke kategoriseret
Model: Meraki

Har du brug for hjælp?

Hvis du har brug for hjælp til Walrus Audio Meraki stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Walrus Audio Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer