Xiaomi Mi Robot Vacuum Manual

Xiaomi Støvsuger Mi Robot Vacuum

Læs nedenfor 📖 manual på dansk for Xiaomi Mi Robot Vacuum (27 sider) i kategorien Støvsuger. Denne guide var nyttig for 122 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/27

User Manual of «MiJia» vacuum cleaner

Before using the product, please carefully read this manual and save it properly

Caution

Before you start cleaning, make sure, that there were no wires and foreign objects on the oor,

which are easily overturned, broken or valuable items that may be damaged, or that may be

confusing the unit, because of which stucking, collision or whatever may happen way prejudiced

person and property.

If the device is used in a space, where there is a height dierence, take care of a reliable

physical protection - anti-fall device screen, to prevent damage to people and property.

Attention! During a rst cleaning, please follow the device personally, and help him in emerging

issues - after issues such cleaning is hassle-free. If there are some areas, that do not require

cleaning, and the unit can get stuck in them, get a virtual barrier that will deter the unit from

entering the above-mentioned areas.

1. Connect power cable. Excess of cable is pulled into the housing trough.

Attention! Power cord, hanging down on the oor, can be entangled by the cleaner, or

removed from the power outlet, which will cause power interruption.

2. On a at surface set a charging base and connect it to power supply.

Note: Make sure that both sides of a charging base have at least 0.5 m,

and front surface has at least 1.0 m of free space.

3. Turning and charging the device.

Press and hold the O button, wait for the ring lamp lights up and press the device to a

charging base.

QR code

Fing «Mi Smart Home» App on the manufacturer’s page or scan two-

dimensional code and download the mobile app, open the lid of the device

and search for Wi-Fi status indicator lamp. Follow the instructions in the

application.

Wi-Fi status indicator

Slow ashing: Waiting for connection;

Fast ashing: There is a connection;

Continuous combustion: Wi-Fi connection.

Attention! When phone is not connected to a robot cleaner, see «Operating Instructions» -.

«Reset Wi-Fi».

5. Start Cleaning.

When the round charging indicator nishes blinking white light in the respiratory rate and glows

white steady light, it indicates that the device is charged. In this case, briey press the O button or

start the device with a mobile phone.

Colour of ring indicator lamp shows an amount of electric charge:

White - 50%;

Yellow - 50% -20%;

Red - less than 20%.

Attention! At too low battery level you can not turn on the device, in this case, please

press the device to a charging base.

Produkt Specifikationer

Mærke:	Xiaomi
Kategori:	Støvsuger
Model:	Mi Robot Vacuum
Vekselstrømsindgangsspænding:	100 - 240 V
Vekselstrømsindgangsfrekvens:	50 - 60 Hz
Bredde:	345 mm
Dybde:	345 mm
Højde:	96 mm
Vægt:	3800 g
Produktfarve:	Hvid
Batterispænding:	14.4 V
Batterikapacitet:	5200 mAh
Indbygget skærm:	Ingen
Wi-Fi:	Ja
Batteriteknologi:	Lithium
Understøttelse af Smartphone-fjernbetjening:	Ja
Strømforbrug (typisk):	55 W
Driftstemperatur (T-T):	0 - 40 °C
Husmateriale:	Acrylonitrilbutadienstyren
Støjniveau:	- dB
Batterilevetid:	250 m²
Diameter:	345 mm
Støvbeholder type:	Poseløs
Strømledning inkluderet:	Ja
Basestation:	Ja
Kørselstid:	150 min.
Sugekraft:	1800 Pa
Form:	Rund
Støvkapacitet (total):	- L
Automatisk returnering til base station:	Ja
Integrerede sensorer:	Accelerometer,Gyroscope,Laser,Ultrasonic Sensor
Støvsensor:	Ja
Basisstation funktioner:	Opladning