Acer EB243Y Manual

Acer Skærm EB243Y

Læs nedenfor 📖 manual på dansk for Acer EB243Y (5 sider) i kategorien Skærm. Denne guide var nyttig for 11 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/5
English
Acer LCD Monitor Quick Start Guide (QSG)
Important safety instructions
Please read the following instructions carefully.
1. To clean the LCD monitor screen:
Turn off the LCD monitor and unplug the power cord.
Spray a non-solvent cleaning solution onto a rag and clean the screen gently.
2. Do not place the LCD monitor near a window. Exposing the monitor to rain, moisture or sunlight can severely
damage it.
3. Do not apply pressure to the LCD screen. Excessive pressure may cause permanent damage to the display.
4. Do not remove the cover or attempt to service this unit yourself. An authorized technician should perform
servicing of any nature.
5. Store the LCD monitor in a room with a temperature of -20° to 60°C (-4° to140°F). Storing the LCD monitor
outside this range may result in permanent damage.
6. Immediately unplug your monitor and call an authorized technician if any of the following circumstances
occur:
Monitor-to-PC signal cable is frayed or damaged.
Liquid spills onto the LCD monitor or the monitor is exposed to rain.
The LCD monitor or case is damaged.
Package contents
LCD monitor Power cord HDMI cable
(optional)
VGA cable
(optional) Quick start guide
USER GUIDE
LCD monitor E YB3 series-EB243
Attaching the monitor to the stand
1. Remove the monitor bracket and base from the packaging and place it on a stable and level workspace.
2. Remove the monitor from the packaging, by aligning the front-end of the bracket with the corresponding
slot on the back of the display, push the bracket into the slot until you hear a click sound.
3. Push the stand against the bracket and turn the screw clockwise to fasten it. By doing so, the bracket shall
be installed on the monitor.
Connecting your monitor to a computer
1. Turn off your computer and unplug your computer's
power cord.
2. Connect the signal cable to the VGA (optional) and/or
HDMI (optional) input socket of the monitor, and the
VGA (optional) and/or HDMI (optional) output socket
of the graphics card on the computer. Then tighten the
thumbscrews on the signal cable connector.
3. Insert the monitor power cable into the power port at the
back of the monitor.
4. Plug the power cords of your computer and your monitor
into a nearby electrical outlet.


Produkt Specifikationer

Mærke: Acer
Kategori: Skærm
Model: EB243Y

Har du brug for hjælp?

Hvis du har brug for hjælp til Acer EB243Y stil et spørgsmål nedenfor, og andre brugere vil svare dig




Skærm Acer Manualer

Skærm Manualer

Nyeste Skærm Manualer

Dell

Dell Alienware AW2524HF Manual

22 September 2024
Dell

Dell Alienware AW3423DW Manual

22 September 2024
Dell

Dell Alienware AW3225QF Manual

22 September 2024
Dell

Dell Alienware AW2725DF Manual

22 September 2024
Dell

Dell P2725H WOST Manual

22 September 2024
Titan Army

Titan Army P32A2S2 Manual

22 September 2024
Dell

Dell Alienware AW2723DF Manual

22 September 2024
Dell

Dell P2425H WOST Manual

22 September 2024
Viewsonic

Viewsonic VG3208-4K Manual

22 September 2024
Viewsonic

Viewsonic VG2208A-HD Manual

22 September 2024