Acer V196HQLA Manual
Acer
LCD-skærmen
V196HQLA
Læs nedenfor 📖 manual på dansk for Acer V196HQLA (3 sider) i kategorien LCD-skærmen. Denne guide var nyttig for 27 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere
Side 1/3
English
Acer LCD Monitor Quick Start Guide (QSG)
Important safety instructions
Please read the following instructions carefully.
1. To clean the LCD monitor screen:
• Turn off the LCD monitor and unplug the power cord.
• Spray a non-solvent cleaning solution onto a rag and clean the screen gently.
2. Do not place the LCD monitor near a window. Exposing the monitor to rain, moisture or sunlight can severely damage
it.
3. Do not apply pressure to the LCD screen. Excessive pressure may cause permanent damage to the display.
4. Do not remove the cover or attempt to service this unit yourself. An authorized technician should perform servicing of
any nature.
5. Store the LCD monitor in a room with a temperature of -20° to 60° C (-4° to140° F). Storing the LCD monitor outside
this range may result in permanent damage.
6. Immediately unplug your monitor and call an authorized technician if any of the following circumstances occur:
• Monitor-to-PC signal cable is frayed or damaged.
• Liquid spills onto the LCD monitor or the monitor is exposed to rain.
• The LCD monitor or case is damaged.
Attaching the monitor to the base
1. Remove the monitor base from the packaging and place it on a stable and level workspace.
2. Remove the monitor from the packaging.
3. Align the release button at the buttom of the monitor with the corresponding slot at the bottom of the base. A clicking
soundsigniesthatthemonitorhasbeensecurelyattachedtothebase.
Connecting your monitor to a computer
1. Turn off your computer and unplug your computer's power cord.
2. Connect the signal cable to the VGA input socket of the monitor, and
the VGA output socket of the graphics card on the computer. Then
tighten the thumbscrews on the signal cable connector.
3. Insert the monitor power cable into the power port at the back of the
monitor.
4. Plug the power cords of your computer and your monitor into a
nearby electrical outlet.
External controls
1&2 Power button Turns the monitor on/off. Blue indicates power on. Amber indicates
standby/ power saving mode.
3&4 </> Minus / Plus If the OSD is active, press the or buttons to toggle Minus Plus
between the OSD options. If the OSD is inactive, press the or Minus
Plus (Optional) buttons to adjust the volume.
5 Menu OSD functions Press to view the OSD. Press again to enter a selection in the OSD.
6 Auto Auto If the OSD is active, press to exit the OSD. Once the OSD is Auto
inactive, press and the monitor will automatically optimize the Auto
display position, focus, and clock of your display.
7 : Em p ow er i ng
Key
a. When the OSD menu is active, this button will act as the exit key (
exit OSD menu).
b. When the OSD menu is inactive, press this button to select
scenario mode.
Produkt Specifikationer
| Mærke: | Acer |
| Kategori: | LCD-skærmen |
| Model: | V196HQLA |
Har du brug for hjælp?
Hvis du har brug for hjælp til Acer V196HQLA stil et spørgsmål nedenfor, og andre brugere vil svare dig
LCD-skærmen Acer Manualer
5 Oktober 2022
5 Oktober 2022
5 Oktober 2022
5 Oktober 2022
5 Oktober 2022
5 Oktober 2022
5 Oktober 2022
5 Oktober 2022
5 Oktober 2022
5 Oktober 2022
LCD-skærmen Manualer
- LCD-skærmen Samsung
- LCD-skærmen Philips
- LCD-skærmen Asus
- LCD-skærmen Abus
- LCD-skærmen BenQ
- LCD-skærmen Packard Bell
Nyeste LCD-skærmen Manualer
5 Oktober 2022
5 Oktober 2022
5 Oktober 2022
5 Oktober 2022
5 Oktober 2022
5 Oktober 2022
5 Oktober 2022
5 Oktober 2022
5 Oktober 2022
5 Oktober 2022