Acer VL270U Manual

Acer overvåge VL270U

Læs nedenfor 📖 manual på dansk for Acer VL270U (2 sider) i kategorien overvåge. Denne guide var nyttig for 5 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
English
Acer LCD Monitor Quick Start Guide (QSG)
Important safety instructions
Please read the following instructions carefully.
1. To clean the LCD monitor screen:
Turn off the LCD monitor and unplug the power cord.
Spray a non-solvent cleaning solution onto a rag and clean the screen gently.
2. Do not place the LCD monitor near a window. Exposing the monitor to rain, moisture or sunlight can severely damage
it.
3. Do not apply pressure to the LCD screen. Excessive pressure may cause permanent damage to the display.
4. Do not remove the cover or attempt to service this unit yourself. An authorized technician should perform servicing of
any nature.
5. Store the LCD monitor in a room with a temperature of -20° to 6C (-4° to140° F). Storing the LCD monitor outside
this range may result in permanent damage.
6. Immediately unplug your monitor and call an authorized technician if any of the following circumstances occur:
Monitor-to-PC signal cable is frayed or damaged.
Liquid spills onto the LCD monitor or the monitor is exposed to rain.
The LCD monitor or case is damaged.
Attaching the monitor to the base
1. Remove the monitor from the packaging.
2. Attach the footstand to the base. (for selected models).
3. Turn clockwise to lock. Ensure that the base in locked onto the stand. (for selected models)
4. Secure the base to the stand by turning the screw using the intergrated tab or a suitable coin. (for selected models)
Connecting your monitor to a computer
1. Turn off your computer and unplug your computer's power cord.
2. Connect the signal cable to the DP (optional) and/or HDMI (optional)
input socket of the monitor, and the DP (optional) and/or HDMI
(optional) output socket of the graphics card on the computer.
3. Optional: Connect the audio input socket (AUDIO IN) of the LCD
monitor and the line-out port on the computer with the audio cable.
4. Insert the monitor power cable into the power port at the back of the
monitor.
5. Plug the power cords of your computer and your monitor into a
nearby electrical outlet.
Note: Audio output is only for audio output model. Please check user
manual for more instruction.
DP
HDMI
AdaptiveSync(DP/HDMI):
It can allow a AdaptiveSync supported graphics source to dynamically adjust display refresh rate based on typical content
frame rates for power efcient, virtually stutter free and low-latency display update.
1
2
3
4
5
External controls
1 Power button Turns the monitor on/off.Blue indicates power on. Amber indicates standby/ power
saving mode.
2 Function key
/
a. Press to view Main page. Press again to enter hotkey1 function.
b. When the Function Menu is active, press this key to view the basic
information for your monitor and current input or reset the custom color
settings to the factory defaults.


Produkt Specifikationer

Mærke: Acer
Kategori: overvåge
Model: VL270U

Har du brug for hjælp?

Hvis du har brug for hjælp til Acer VL270U stil et spørgsmål nedenfor, og andre brugere vil svare dig




overvåge Acer Manualer

Acer

Acer K272HUL Dbmidpx Manual

14 Oktober 2024
Acer

Acer EK220QB Manual

13 Oktober 2024
Acer

Acer CB342CUR Manual

4 Oktober 2024
Acer

Acer Ferrari F20 Manual

4 Oktober 2024
Acer

Acer V193D Manual

4 Oktober 2024
Acer

Acer B203HV Manual

30 September 2024
Acer

Acer SB241Y Manual

30 September 2024
Acer

Acer KA1 Manual

29 September 2024
Acer

Acer XV272KLV Manual

29 September 2024

overvåge Manualer

Nyeste overvåge Manualer

Bauhn

Bauhn APMTR-0624 Manual

15 Oktober 2024
Asus

Asus VP249HR Manual

12 Oktober 2024
Asus

Asus VB178TL Manual

10 Oktober 2024
Asus

Asus VE208N Manual

10 Oktober 2024
Asus

Asus XG258Q Manual

9 Oktober 2024
AOC

AOC C27G2Z3 Manual

7 Oktober 2024
BenQ

BenQ 9H.L8LLA.TPL Manual

6 Oktober 2024
AOC

AOC AGON AG273QZ Manual

5 Oktober 2024