Acer XV272KLV Manual

Acer overvåge XV272KLV

Læs nedenfor 📖 manual på dansk for Acer XV272KLV (4 sider) i kategorien overvåge. Denne guide var nyttig for 10 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/4
English
Acer LCD Monitor Quick Start Guide (QSG)
Important safety instructions
Please read the following instructions carefully.
1. To clean the LCD monitor screen:
Turn off the LCD monitor and unplug the power cord.
Spray a non-solvent cleaning solution onto a rag and clean the screen gently.
2. Do not place the LCD monitor near a window. Exposing the monitor to rain, moisture or sunlight can severely damage
it.
3. Do not apply pressure to the LCD screen. Excessive pressure may cause permanent damage to the display.
4. Do not remove the cover or attempt to service this unit yourself. An authorized technician should perform servicing of
any nature.
5. Store the LCD monitor in a room with a temperature of -20° to 60° C (-4° to140° F). Storing the LCD monitor outside
this range may result in permanent damage.
6. Immediately unplug your monitor and call an authorized technician if any of the following circumstances occur:
Monitor-to-PC signal cable is frayed or damaged.
Liquid spills onto the LCD monitor or the monitor is exposed to rain.
The LCD monitor or case is damaged.
Attaching the monitor to the base
1. Remove the monitor from the packaging.
2. Attach the footstand to the base. (for selected models).
3. Turn clockwise to lock. Ensure that the base in locked onto the stand. (for selected models)
4. Secure the base to the stand by turning the screw using the intergrated tab or a suitable coin. (for selected models)
Connecting your monitor to a computer
1. Turn off your computer and unplug your computer's power cord.
2. Connect the signal cable to the DP (optional) and/or HDMI (optional)
input socket of the monitor, and the DP(optional) and/or HDMI
(optional) output socket of the graphics card on the computer.
3. USB Type C Cable (Optional, USB Type C input models only)
Connect one end of the USB type C cable (optional) to your
computer and connect the other end to your electric devices.
4. Connect the USB Cable(Optional)
Connect the USB cable to port for fast charge.
Connect the USB cable to port.
5. Insert the monitor power cable into the power port at the back of the
monitor.
6. Connect the power adapter and power cord to the monitor, then to a
properly grounded AC outlet.
7. Connecting HDMI/DP+USB-B to computer 1 and USB-C to computer
2 when Control up to 2 computers from a single set of keyboard and
mouse connected to the monitor.
Note: Audio output is only for audio output model. Please check user
manual for more instruction.
Transmitting the 4K 160Hz signal via one HDMI 2.1/ DP 1.4/Type-C port
requires DSC (Display Stream Compression) functionality.
If your computer USB-C do not have DP-Alt, pls connect HDMI/
DP+USB-B to computer 1 and HDMI/DP+USB-C to computer 2.
USB
HDMI1 HDMI2
USB Type C
DP
DP IN
AMD FreeSync Premium:
It can allow a AMD FreeSync Premium supported graphics source to dynamically adjust display refresh rate based on
typical content frame rates for power efcient, virtually stutter free and low-latency display update.
KVM switch(USB Port Select):
The built-in KVM switch allows you to control up to 2 computers from a single set of keyboard and mouse connected to the
monitor.


Produkt Specifikationer

Mærke: Acer
Kategori: overvåge
Model: XV272KLV

Har du brug for hjælp?

Hvis du har brug for hjælp til Acer XV272KLV stil et spørgsmål nedenfor, og andre brugere vil svare dig




overvåge Acer Manualer

Acer

Acer AL2021 Manual

30 December 2025
Acer

Acer VVA241Y Manual

30 December 2025
Acer

Acer ED320QRP3 Manual

6 December 2024
Acer

Acer V277bmix Manual

5 December 2024
Acer

Acer ED270X Manual

5 December 2024
Acer

Acer XV322UX Manual

5 December 2024
Acer

Acer SA271 Manual

5 December 2024
Acer

Acer KA270 Manual

5 December 2024
Acer

Acer QG241YS Manual

5 December 2024

overvåge Manualer

Nyeste overvåge Manualer