Adder Infinity 1002 Manual

Adder Skifte Infinity 1002

Læs nedenfor 📖 manual på dansk for Adder Infinity 1002 (110 sider) i kategorien Skifte. Denne guide var nyttig for 7 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/110
INSTALLATION
5
CONFIGURATIONOPERATION
FURTHER
INFORMATION
INDEX
Indicators
These six indicators clearly show the key aspects of operation:
NET On when valid network link is present.
On when the AUX (serial) port is enabled and active.SER
On when audio is enabled and active.AUD
On when USB is enabled and active.USB
On when DVI video is enabled and active.DVI
PWR Power indicator.
Indicators
These six indicators clearly show the key aspects of operation:
NET On when valid network link is present.
On when the AUX (serial) port is enabled and active.SER
On when audio is enabled and active.AUD
USB On when the USB link with the connected PC is active.
DVI On when a video input signal from the PC is detected.
PWR Power indicator.
ADDERLINK INFINITY (1002) UNIT FEATURES
The ALIF 1002 units are housed within durable, metallic enclosures with most connectors situated at the rear panel -
the Ethernet ports are situated on the front panels. The smart front faces also feature the operation indicators.
ALIF 1002 transmitter - front ALIF 1002 receiver - front
System
(Gigabit
Ethernet)
port
ALIF 1002 receiver - rearALIF 1002 transmitter - rear
Audio
line
in/out
AUX
(serial)
port
USB
port
Options
switches
( )further details
Power
input
Video
input
Audio
line
in/out
USB
ports
Power
input
Video
output
AUX
(serial)
port
Teaming
port
Teaming
port
System
(Gigabit
Ethernet)
port
Options
switches
( )further details
INSTALLATION
7
CONFIGURATIONOPERATION
FURTHER
INFORMATION
INDEX
Combined DVI-D and USB
cable (1.8m)
Power adapter
(20W) and
country-specic
power cord
SUPPLIED ITEMS - ALIF 1002
Audio cable 2m
(3.5mm stereo jacks)
ALIF transmitter (1002T) package
Power adapter
(20W) and
country-specic
power cord
ALIF receiver (1002R) package
Information wallet
containing:
Four self-adhesive rubber feet
Quick start guide
Safety document
Information wallet
containing:
Four self-adhesive rubber feet
Quick start guide
Safety document
ALIF1002T unit
ALIF1002R unit
INSTALLATION
8
CONFIGURATIONOPERATION
FURTHER
INFORMATION
INDEX
Combined DVI-D and USB
cable (1.8m)
Power adapter
(20W) and
country-specic
power cord
SUPPLIED ITEMS - ALIF DUAL
2 x Audio cable 2m
(3.5mm stereo jacks)
ALIF dual transmitter (2002T/2020T)
package
Power adapter
(20W) and
country-specic
power cord
ALIF dual receiver (2000R/2020R)
package
Information wallet
containing:
Four self-adhesive rubber feet
Quick start guide
Safety document
Information wallet
containing:
Four self-adhesive rubber feet
Quick start guide
Safety document
ALIF2002T or
ALIF2020T unit
ALIF2000R or
ALIF2020R unit
Single link DVI-D to DVI-D video cable
12
INSTALLATIONCONFIGURATIONOPERATION
FURTHER
INFORMATION
INDEX
TX audio links
ALIF (1002) and ALIF dual units support
two way stereo digital sound so that you
can use a remote microphone as well as
speakers.
2 [Where a microphone is to be used]: Connect a second audio link cable between the
OUT socket on the TX unit rear panel and the Line In socket of the host computer.
To make audio links
1 Connect an audio link cable between the IN socket on the TX unit rear panel and
the speaker output socket of the host computer.
AUX
VI-D-1
OUT
IN
Speaker link from
host computer
Microphone link
to host computer
TX USB link
ALIF (1002) and ALIF dual units act as
USB 2.0 hubs and so can provide four
sockets at the RX unit with only a single
connection at the TX unit.
OPTIONS
12
12
2 Connect the type A connector of the cable to a vacant USB socket on the
host computer.
USB link from
host computer
To make a USB link
1 Connect the type B connector of the supplied USB cable to the USB port on the TX
unit rear panel.
15
INSTALLATIONCONFIGURATIONOPERATION
FURTHER
INFORMATION
INDEX
TX/RX Management port
The Management port on each ALIF dual unit provides a consistent method to gain
access to the internal conguration utility of each ALIF dual. Although the conguration
utility is accessible via the System (Gigabit Ethernet) port and also the Teaming port;
if the ALIF dual units are being used in a point-to-point arrangement, then it would
be necessary to temporarily reconnect each unit to a network in order to make
conguration changes. The Management port allows the admin user to simply connect
a computer directly to each ALIF dual unit and access the conguration utility using a
consistent IP address - thus negating the need to know the main port addresses of each
ALIF dual unit in advance.
To connect a computer to access the conguration utility
1 Connect a CAT 5, 5e, 6, or 7 link cable to the Management port socket located on the
far left side of the ALIF dual front panel. The port automatically congures itself, so no
cross-over cable is required (but is supported if you do use one).
2 Connect the other end of the link cable directly to the network port of your
computer.
3 Use a web browser to gain access to the internal conguration utility. The standard IP
address of the Management port is 192.168.1.42
Note: This standard IP address can be changed within the conguration utility.
Please see the section AdderLink Innity browser-based conguration utility for
further details.
(ALIF dual units only)


Produkt Specifikationer

Mærke: Adder
Kategori: Skifte
Model: Infinity 1002

Har du brug for hjælp?

Hvis du har brug for hjælp til Adder Infinity 1002 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Skifte Adder Manualer

Skifte Manualer

Nyeste Skifte Manualer