AEG LF8594O8O Manual

AEG Vaskemaskine LF8594O8O

Læs nedenfor 📖 manual på dansk for AEG LF8594O8O (52 sider) i kategorien Vaskemaskine. Denne guide var nyttig for 9 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF
Side 1/52
USER
MANUAL
EN User Manual
Washing Machine
LF8594O8O
CONTENTS
1. SAFETY INFORMATION......................................................................................3
2. SAFETY INSTRUCTIONS.................................................................................... 5
3. PRODUCT DESCRIPTION...................................................................................7
4. TECHNICAL DATA............................................................................................... 8
5. INSTALLATION.....................................................................................................9
6. CONTROL PANEL..............................................................................................14
7. DIAL AND BUTTONS......................................................................................... 17
8. SETTINGS.......................................................................................................... 20
9. BEFORE FIRST USE..........................................................................................21
10. PROGRAMS .................................................................................................... 21
11. WI-FI - CONNECTIVITY SETUP................................................................. 27
12. DAILY USE....................................................................................................... 29
13. HINTS AND TIPS..............................................................................................35
14. CARE AND CLEANING.................................................................................... 36
15. TROUBLESHOOTING......................................................................................42
16. QUICK GUIDE.................................................................................................. 47
17. WARRANTY - AUSTRALIA AND NEW ZEALAND...........................................49
18. ENVIRONMENTAL CONCERNS......................................................................51
AEG app
www.aeg.com2
1.1 Children and vulnerable people safety
•This appliance can be used by children aged from 8
years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision or
instruction concerning the use of the appliance in a
safe way and understand the hazards involved.
•Children between 3 and 8 years of age and persons
with very extensive and complex disabilities shall be
kept away from the appliance unless continuously
supervised.
•Children of less than 3 years of age should be kept
away from the appliance unless continuously
supervised.
•Children should be supervised to ensure that they do
not play with the appliance.
•Keep all packaging away from children and dispose of
it appropriately.
•Keep detergents away from children.
•Keep children and pets away from the appliance when
the door is open.
•If the appliance has a child safety device, it should be
activated.
•Children shall not carry out cleaning and user
maintenance of the appliance without supervision.
1.2 General Safety
•This appliance is for washing domestic-type, machine-
washable laundry only.
•This appliance is designed for single household
domestic use in an indoor environment.
•This appliance may be used in, offices, hotel guest
rooms, bed & breakfast guest rooms, farm guest
houses and other similar accommodation where such
use does not exceed (average) domestic usage levels.
•Do not change the specification of this appliance.
www.aeg.com4
• Adjust the feet to have the necessary
space between the appliance and the
flooring.
• Do not install the appliance where the
appliance door cannot be fully
opened.
• Do not put a container to collect
possible water leakage under the
appliance. Contact the Authorised
Service Centre to ensure which
accessories can be used.
2.2 Electrical connection
WARNING!
Risk of fire and electric
shock.
• WARNING: This appliance is
designed to be installed / connected
to a grounding connection in the
building.
• Always use a correctly installed
shockproof socket.
• Make sure that the parameters on the
rating plate are compatible with the
electrical ratings of the mains power
supply.
• Do not use multi-plug adapters and
extension cables.
• Make sure not to cause damage to
the mains plug and to the mains
cable. Should the mains cable need to
be replaced, this must be carried out
by our Authorised Service Centre.
• Connect the mains plug to the mains
socket only at the end of the
installation. Make sure that there is
access to the mains plug after the
installation.
• Do not touch the mains cable or the
mains plug with wet hands.
• Do not pull the mains cable to
disconnect the appliance. Always pull
the mains plug.
2.3 Water connection
• The inlet water shall not exceed 25
°C.
• Do not cause damage to the water
hoses.
• Before connection to new pipes, pipes
not used for a long time, where repair
work has been carried out or new
devices fitted (water meters, etc.), let
the water flow until it is clean and
clear.
• Ensure that there are no visible water
leaks during and after the first use of
the appliance.
• Do not use an extension hose if the
inlet hose is too short. Contact the
Authorised Service Centre for the
replacement of the inlet hose.
• When unpacking the appliance, It is
possible to see water flowing from the
drain hose. This is due to the testing
of the appliance with the use of water
in the factory.
• You can extend the drain hose to
maximum 400 cm. Contact the
Authorised Service Centre for the
other drain hose and the extension.
• Make sure that there is access to the
tap after the installation.
2.4 Use
WARNING!
Risk of injury, electric shock,
fire, burns or damage to the
appliance.
• Follow the safety instructions on the
detergent packaging.
• Do not put flammable products or
items that are wet with flammable
products in, near or on the appliance.
• Do not wash fabrics which are heavily
soiled with oil, grease or other greasy
substances. It can damage rubber
parts of the washing machine.
Prewash such fabrics by hand before
loading them into the washing
machine.
• Do not touch the glass door while a
program operates. The glass can get
hot.
• Make sure that all metal objects are
removed from the laundry.
2.5 Internal lighting
WARNING!
Risk of injury.
• Visible LED radiation, do not look
directly into the beam.
• To replace the internal lighting,
contact the Authorised Service
Centre.
www.aeg.com6
2.6 Service
• To repair the appliance contact the
Authorised Service Centre. Use
original spare parts only.
• Please note that self-repair or non-
professional repair can have safety
consequences and might void the
guarantee.
• Concerning the lamp(s) inside this
product and spare part lamps sold
separately: These lamps are intended
to withstand extreme physical
conditions in household appliances,
such as temperature, vibration,
humidity, or are intended to signal
information about the operational
status of the appliance. They are not
intended to be used in other
applications and are not suitable for
household room illumination.
2.7 Disposal
WARNING!
Risk of injury or suffocation.
• Disconnect the appliance from the
mains electrical and water supplies.
• Cut off the mains electrical cable
close to the appliance and dispose of
it.
• Remove the door catch to prevent
children or pets from becoming
trapped in the drum.
• Dispose of the appliance in
accordance with local requirements
for the disposal of Waste Electrical
and Electronic Equipment (WEEE).
3. PRODUCT DESCRIPTION
3.1 Special features
Your new washing machine meets all
modern requirements for an effective
treatment of laundry with low water,
energy and detergent consumption and
proper care of fabric.
• The and Wi-Fi connection Remote
Start enable you to start a cycle, to
interact with your washing machine
and to check the washing cycle status
in remote control.
• The with aUniversalDose drawer
compartment dedicated to each type
of detergent, including a compartment
for Capsules, equipped with a system
able to spread and mixing the
detergent in an optimal way, and to
dissolve the detergent residues after
each cycle.
• The hasPowerCare technology
been designed to protect the fabric
fibres thanks to different pre-mixing
phases that dissolves first the
detergent and then fabric softener in
the water before they are distributed
in the laundry. So every fibre is
reached and cared for.
• The detectsProSense technology
the laundry load size defining the
program duration in 30 seconds. The
washing program is tailored to the
laundry load and the type of fabric
without consuming more time, energy
and water than necessary.
• The steam has a quick and easy way
to refresh the clothes. The gentle
steam programs remove odours and
reduce creases in dry fabrics so they
need little ironing.
The , finishesPlus Steam option
every cycle with gentle steam that
relaxes the fibres and reduces fabric
creasing. Ironing will be easier!
• The Stains option pre-treats
stubborn stains optimizing the
effectiveness of the stain remover.
ENGLISH 7
3.2 Appliance overview
1 2 3 10
6
7
8
411
9
12 13
5
1Worktop
2Detergent dispenser
3Control panel
4Door handle
5Internal light
6Rating plate
7Drain pump filter
8Feet for levelling the appliance
9Drain hose
10 Inlet hose connection
11 Mains cable
12 Transit bolts
13 Hose support
00000000
00A
Mod.xxxxxxxxx
000V ~ 00Hz 0000 W
910000000 00
Prod.No.
B C D EA
The rating plate reports:
A. QR code
B. model name
C. product number
D. electrical ratings
E. serial number
4. TECHNICAL DATA
Dimension Width/ Height/ Total depth 59.7 cm /84.7 cm /66.0 cm
Electrical connection Voltage
Overall power
Fuse
Frequency
220 - 240 V
2100 W
10 A
50 Hz
www.aeg.com8
Level of protection against ingress of solid particles and
moisture ensured by the protective cover, except where
the low voltage equipment has no protection against mois‐
ture
IPX4
Water supply pressure Minimum
Maximum
0.5 bar (0.05 MPa)
10 bar (1.0 MPa)
Water supply 1) Cold water
Maximum Load Cotton 9.0 kg
Spin Speed Maximum spin speed 1351 rpm
1) Connect the water inlet hose to a water tap with a 3/4'' thread.
Power consumption in different modes
Off (W) Stand-by (W) Delay start
(W)
Networked
standby (W)
0.50 0.50 4.00 2.001)
Time to Off/Standby mode is 15 minutes maximum.
1) The energy consumption of the connected function is approximately 17.5 kWh per year. To disconnect
this function, please refer to the chapter 'Wi-fi - Connectivity setup'.
5. INSTALLATION
WARNING!
Refer to Safety chapters.
5.1 Unpacking
WARNING!
Remove all the packaging
and the transit bolts before
installing the appliance.
WARNING!
Use the gloves.
1. Remove the external film. If
necessary, use a cutter.
2. Remove the cardboard top and the
polystyrene packaging materials.
3. Remove the internal film.
ENGLISH 9
4. Open the door and remove the
polystyrene piece from the door seal
and all the items from the drum.
5. Carefully put the appliance down on
its rear side.
6. Put the front polystyrene packaging
element on the floor under the
appliance.
Make sure not to damage
the hoses.
7. Remove the polystyrene protection
from the bottom.
1
2
8. Fully clean and dry the bottom of the
appliance.
CAUTION!
Do not use alcohol, solvents
or chemical products.
9. Make sure to identify the different
sizes and the positions of the sound
barriers. Refer to the illustration:
A
B
• (FRONT) = Front of theA
appliance
• (BACK) = Rear of the applianceB
10. Remove the adhesive strip from the
silent barriers.
11. Attach the four barriers to bottom of
the appliance.
12. Refer to the illustration. Make sure
that the barriers are securely
attached.
x4
A
B
www.aeg.com10
Attach the sound barriers at
a room temperature.
13. Pull up the appliance in vertical
position.
14. Remove the power supply cable and
the drain hose from the hose holders.
It is possible to see water
flowing from the drain hose.
This is due to the testing
with water of the appliance
in factory.
15. Remove the three bolts by using the
spanner supplied with the appliance.
16. Pull out the plastic spacers.
17. Put the plastic caps, that you find in
the user manual bag, in the holes.
We recommend that you
keep the packaging and the
transit bolts for any
movement of the appliance.
5.2 Positioning and levelling
1. Install the appliance on a flat hard
floor.
Make sure that the appliance
does not touch the wall or
other units.
2. Loosen or tighten the feet to adjust
the level.
WARNING!
Do not put cardboard, wood
or equivalent materials
below the appliance feet to
adjust the level.
x4
The appliance must be level and stable.
A correct adjustment of the
appliance level prevents the
vibration, noise and the
movement of the appliance
when in operation.
ENGLISH 11
When the appliance is
installed on a plinth or a
tumble dryer is stacked on
the washing machine, use
the accessories described in
chapter 'Accessories'. Read
carefully the instructions
supplied with the appliance
and with the accessory.
5.3 Fixing plate kit
If you install the appliance on a plinth
that is not an accessory supplied by
AEG, secure the appliance with the fixing
plates. This spare part is available in web
shop or from authorised dealer.
Read carefully the instructions supplied
with the accessory.
5.4 The inlet hose
1. Connect the water inlet hose to the
back of the appliance.
2. Position it toward left or right
depending on the position of the
water tap.
º20º
4 º45º
Make sure that the inlet hose
is not in vertical position.
3. If necessary, loose the ring nut to set
it in the correct position.
4. Connect the water inlet hose to the
cold water tap with 3/4" thread.
WARNING!
The inlet water shall not
exceed 25 °C.
CAUTION!
Make sure that there are no
leaks from the couplings.
Do not use an extension
hose if the inlet hose is too
short. Contact the service
centre for the replacement of
the inlet hose.
5.5 Water-stop device
The inlet hose has a water stop device.
This device prevents water leaks in the
hose because of its natural ageing.
The red sector in the window « » showsA
this fault.
A
If this occurs, close the water tap and
contact the authorized service centre to
replace the hose.
5.6 Water drainage
The drain hose should be positioned at a
height of not less than 60 cm and not
more than 100 cm from the floor.
www.aeg.com12
You can extend the drain
hose to maximum 400 cm.
Contact the authorized
service centre to buy the
other drain hose and the
extension.
It is possible to connect the drain hose in different ways:
min.600 mm
max.1000 mm
• Connect the drain hose to the spigot
and tighten it with a clamp.
• Position the hose directly to a built-in
drain pipe in the room wall and tighten
it with a clamp.
• Without the plastic hose guide, to a
sink spigot - remove the plastic
membrane from the sink trap spigot.
• To a stand pipe with vent hole - insert
the drain hose directly into a drain
pipe or stand pipe.
• The drain hose can be bent into U
shape and put around the plastic
guide. On the edge of a sink - fasten
the guide to the water tap or to the
wall.
Make sure that the drain
hose makes a loop to
prevent particles going into
the appliance from the sink.
Make sure that the plastic
guide cannot move when the
appliance drains and the
drain hose end is not
immersed in the water.
There may be a return of
dirty water into the
appliance. Buy accessories
from authorised supplier.
The end of the drain hose
must always be ventilated ,
i.e. the inner diameter of the
drain pipe (min. 38 mm -
min. 1.5") must be larger
than the external diameter of
the drain hose.
5.7 Electrical connection
At the end of installation you can connect
the mains plug to the mains socket.
ENGLISH 13
The rating plate and the 'Technical Data'
chapter indicate the necessary electrical
ratings. Make sure that they are
compatible with the mains power supply.
Check that your domestic electrical
installation can take the maximum load
required, also taking into account any
other appliances in use.
Connect the appliance to an earthed
socket.
The power supply cable must be easily
accessible after installing the appliance.
For any electrical work required to install
this appliance, contact our Authorised
Service Centre.
The manufacturer does not accept any
responsibility for damage or injury
through failure to comply with the above
safety precaution.
6. CONTROL PANEL
6.1 Control panel description
3s
Fini sh
In
Remote
Start
On/Off
Stain s/
Prewa sh Time
Save Extra
Rinse
Plus
Stea m
Temperature Spin
Spor ts
Home
Spec ial
45
3
27 86
15 14 12 11 1013
19
The options are not selectable with all washing programs. Check the
compatibility between options and washing programs in the "Options
compatibility with programs" paragraph in the "Programs" chapter. An
option can exclude another one, in this case the appliance doesn't allow
you to set the incompatible options together.
Make sure the screen and touch buttons are always clean and dry.
1On/Off push button
2Program dial
3Favourite programs
4Display
www.aeg.com14
5Plus (+) and Minus (-) touch buttons
linked to Finish In option
6Wi-fi connection and Remote Start
touch button
7Finish In touch button
8Start / Pause touch button
9Capsules touch button
10 Plus Steam touch button
11 Extra Rinse touch button
12 Time Save touch button
13 Stains/Prewash touch button and
permanent Child Lock option
14 Spin touch button
15 Temperature touch button
6.2 Display
Door locked indicator.
Washing phase indicator. It flashes during pre-wash and wash phase.
Rinsing phase indicator. It flashes during rinse phase.
Spinning and draining phase indicator. It flashes during spin and drain
phase.
Steam phase indicator.
Anti-crease phase indicator.
Eco program indicator: it lights on when the selected program and op‐
tions have an eco profile.
Add garments indicator: it lights on when the program starts and the
user can still pause the appliance and add more laundry.
Extra Rinse indicator.
ProSense indicator.
Finish In indicator.
ENGLISH 15
The digital indicator can show:
• Program duration (e. g. ).
The time shown when the program is set could not
correspond to effective duration and change after
ProSense phase.
• Maximum load.
• Finish in time (e. g. or ).
• Cycle end ( ).
• Warning code (e.g. ).
• Indication of total operating hours of the appliance. Refer to the 'Op‐
erating hours counter' section in the 'Settings' paragraph for more
details.
• When working with the APP: , (access point), (up‐
date). Please refer to the chapter 'Wi-FI - Connectivity setup'.
Maximum load indicator. The value is shown for three seconds after
program selection, alternated with cycle duration.
Maximum laundry indicator. It blinks if the laundry amount exceeds the
declared load.
This indicator reminds to run a cleaning cycle.
APP notification to check.
Remote connection indicator.
Wi-Fi connection indicator.
Child safety lock indicator.
The Temperature area:
Temperature indicator
Cold water indicator
The spin area:
Spin speed indicator
No Spin indicator. Spin phase is off.
Extra Silent indicator.
Rinse hold indicator.
Pre-wash indicator.
Stain indicator.
www.aeg.com16
7.7 Finish In
Set this option as last after
program and other options
selection, otherwise it can be
cancelled if you change
some setting.
This button allows activating the Finish In
option and by means of the Plus (+
increases) Minus (- decreases) and
touch buttons it is possible to choose the
time within which a program should
terminate. The program end can be
postponed by one 1 hour every button+
touch until 24 hours maximum. The
'finish in' time can be reduce by means of
the button until 0.-
The display shows the normal program
duration alternatively with the set
program end time (expressed in hours
0h). The minimum selectable time
corresponds to rounded up hour of the
maximum duration of a program (e.g. if
the cycle duration lasts 3:15 hours, the
minimum selectable time will be 4h).
After program start, the door is locked
and the appliance starts the ProSense
phase. When load estimation ends, on
the display the icon of running phase
blinks and the time digit counts down in
steps of one hour and in steps of 1
minute during the last hour.
7.8 Start / Pause
Touch the Start / Pause button to
start, pause the appliance or interrupt a
running program.
7.9 Capsules
Touch this button to activate or
deactivate the Capsules option .
When activated the relevant indicator is
on.
Follow the Pods manufacturer's dosage
and storage recommendations.
Put maximum two tablets or single-dose
detergents in the Capsules compartment
in the detergent dispenser drawer.
The option remains active also for next
cycles until it is deactivated and if it is
selectable with the set program.
7.10 Plus Steam
This option adds a steam phase followed
by a short anti-crease phase at the end
of the washing program.
The steam phase reduces fabric
creasing and facilitates the fabric ironing.
The Plus Steam option achieves good
results with a small load because steam
better penetrates the laundry if there is
more space. For this reason, the
program maximum load combined with
this option is 2 kg (approximately 8 - 10
shirts).
When setting the Plus Steam option, the
maximum load drops to 2 kg in the
display and program time is adjusted
accordingly.
The indicator blinks in the display
during steam phase.
This option can affect the
program duration.
When the program stops the display
shows a zero , the indicator is
steady on.
The anti-crease phase starts, the
indicator is blinking, and the Start /
Pause led remains lit. The drum
performs smooth movements for about
30 minutes to keep the steam benefit.
To interrupt the anti-crease phase, you
can:
• Press the On/Off button for a few
seconds to activate or the deactivate
the appliance.
• Turning the program dial in another
position.
When the anti-crease movements stop
and the door unlocks, the appliance
proposes again the previous set
program.
A small laundry load helps to
reach better results.
www.aeg.com18
7.11 Extra Rinse
With this option you can add a few rinses
to the selected washing programs and
optimise the fabric softener distribution
and improve the fabric softness.
It is suggested when you use the fabric
softener.
Useful for people allergic to detergents
and in areas where the water is soft.
This option increases the program
duration.
The button indicator comes on.
7.12 Time Save
With this option you can decrease the
program duration.
• If your laundry is normally or lightly
soiled, it may be advisable to shorten
the washing program. Touch this
button to decrease the duration.once
• In case of smaller load, touch this
button to set an extra quicktwice
program.
In this case, the temperature 95°C is
not selectable.
The led of the button is on and the
display shows the set program duration.
This option can also be used
to shorten the steam
program duration.
7.13 Stains/Prewash
Press this button repeatedly to activate
one of the two options.
The relevant indicator goes on in the
display.
•Stains
Select this option to pre-treat heavily
soiled or stained laundry using stain
remover.
Pour the stain remover into
compartment . The stain remover
is pre-mixed and heated with
detergent in order to improve its
effectiveness.
This option is not
available with a
temperature lower than
40 °C.
•Prewash
Use this option to add a prewash
phase at 30 °C before the washing
phase.
This option is recommended for
heavily soiled laundry, especially if
containing sand, dust , mud and other
solid particles.
The options can increase the
program duration.
These two options cannot be
set together.
7.14 Spin
When you set a program, the appliance
automatically selects the default spin
speed.
Touch this button repeatedly to:
•Change the spin speed.
The display shows only
the spin speeds available
for the set program.
• .Activate the Rinse Hold option
The water of the last rinse is not
drained out to prevent the fabrics from
creasing. The washing program ends
with water in the drum and the final
spin phase is not performed.
The display shows the indicator .
The drum turns regularly to reduce
creasing.
The door stays locked. The drum
turns regularly to reduce creasing.
You must drain the water to unlock
the door.
Touch Start / Pause button : the
appliance performs the spinning
phase and drains the water.
•Activate the Extra silent option.
All spinning phases (intermediate spin
and final spin) are suppressed and
the program ends with water in the
drum. This helps to reduce creasing.
As the program is very quiet, it is
suitable for use at night time when
cheaper electricity tariffs are
available. In some programs the
rinses are performed with more water.
The display shows the indicator .
The door stays locked. The drum
turns regularly to reduce creasing.
ENGLISH 19
You must drain the water to unlock
the door.
Touch the Start / Pause button: the
appliance performs only the draining
phase.
• .No Spin
Set this option to deactivate all spin
phases. The display shows the
indicator . The appliance
performs the only draining phase of
the selected washing program. Set
this option for very delicate fabrics.
The rinses phase uses more water for
some washing programs
The appliance empties the
water out automatically after
approximately 18 hours.
7.15 Temperature
When you select a washing program, the
appliance automatically proposes a
default temperature.
Touch this button repeatedly until the
desired temperature value appears on
the display.
When the display shows the indicators
and , the appliance does not heat
the water.
8. SETTINGS
8.1 Introduction
When pressing a key
combination, yourdo not tilt
fingers downwards . The
sensors of the underneath
buttons are sensitive and
may interfere with Your
choice.
8.2 Acoustic signals
This appliance is provided with different
acoustic signals, that operate when:
• You activate the appliance (special
short tune).
• You deactivate the appliance (special
short tune).
• You touch the buttons (click sound).
• You make a wrong selection (3 short
sounds).
• The program is completed (sequence
of sounds for about 2 minutes).
• The appliance has a malfunction
(sequence of short sounds for about 5
minutes).
• When a laundry overload is detected
during ProSense phase (a double
sound played one).
To this option, holdactivate/deactivate
down the Extra Rinse button until a beep
or a double beep sounds.
If you deactivate this
function, the acoustic signals
stops playing at the end of
the program only.
8.3 Child Lock
With this option you can prevent children
from playing with the control panel.
To this option, holdactivate/deactivate
down the Stains/Prewash button until
comes on/goes off on the display.
The appliance will default to this option
after you switch it off.
8.4 Operating Hours Counter
It is possible to visualise the total
operating time of the appliance in hours,
starting from the first switching on. This
value will count operating time of the
cycles (does not include pauses, delayed
start time). To visualise this value,
proceed as follows:
1. Switch the appliance on by pressing
the On/Off button.
2. Press and hold the Extra Rinse and
Plus Steam buttons for some
seconds.
3. After 3 seconds the total hours
operated by the appliance are shown
in the display: e.g. 1276 hours, the
www.aeg.com20
display shows the text Hr for 2
seconds, 12 (thousands and
hundreds) for 2 seconds and 76 (tens
and units).
4. To exit this mode, press any button
or switch the appliance off by means
of theOn/Off button.
If the procedure does not
work (due to timeout or
wrong keys combination),
switch the appliance off and
repeat sequence from the
beginning.
8.5 Factory Defaults
This function allows to restore the factory
default options. To this optionactivate
follow steps below:
1. Switch the appliance on by pressing
On/Off button.
2. Press and hold the Stains/Prewash
and Time Save buttons for some
seconds.
3. The display will show for
about 5 seconds.
9. BEFORE FIRST USE
During installation or before
first use you may observe
some water in the appliance.
This is a residual water left
in the appliance after a full
functional test in the factory
to ensure the appliance is
delivered to customers in
perfect working order and is
no cause for concern.
1. Make sure that all transit bolts have
been removed from the appliance.
2. Make sure that the electrical power is
available and the water tap is open.
3. Remove the folded tag in the
detergent compartment marked by
. This tag suggests to use the
right amount of detergent or softener
for avoiding overdosing.
4. Pour 2 litres of water into the
detergent compartment marked by
.
This action activates the drain system.
5. Set and start a program for cotton at
the highest temperature without any
detergent and laundry in the drum.
10. PROGRAMS
10.1 AEG App app and additional hidden programs
AEG App app provides you with . Connecta wide choice of additional hidden programs
the appliance to AEG App and you will be able to choose the program that suits your needs
most.
You can also memorize any of the hidden cycles in the favourite program positions. To
select the program from the appliance directly refer to the "Favourite programs" paragraph
in "Dial and buttons" chapter.
Program names are subject to change depending on market requirements
without notice.
In the App you can find a complete description of each program.
ENGLISH 21
Sportswear
Daily Training
Down Jackets
Soccer/Rugby
Skiing Gear
Running Shoes
Outdoor
Bed Linen
Curtains
Pillow
Towels
Duvet
Pet Hair
Denim
Silk
Baby
Linen
Business Shirts
Steam Cashmere
Machine Clean
1 Item Fast
Anti-Allergy Vapour
Easy Iron
10.2 Program Chart
The programs are described in this chart following the order of the
selector dial from the top to the bottom.
Washing programs
Program Program description
PowerClean 59min
Cotton and mixed synthetic fabrics. Ideal to wash your daily
load in a short time, for a better clothes care and good cleaning
already at 30°C.
Cottons Eco
White cotton and coloured cotton. Normally, heavily and
lightly soiled items.
The Cottons Eco program at 40 ºC is recommended for a nor‐
mally soiled full load of cotton and is the water and energy rat‐
ing label program in accordance with AS/NZS2040 and AS/
NZS6400.
Cottons
White and coloured cotton fabrics. Ideal for normal and heavy
soil.
Synthetics
Synthetic items or mixed fabric items. Normal soil.
Delicates
Delicate fabrics such as acrylics, viscose and mixed fabrics re‐
quiring gentler washing. Normal soil.
Wool
Machine washable wool, hand washable wool and other fabrics
with «hand washing» care symbol1).
20min 3kg
Cotton and synthetic items lightly soiled or worn only once.
www.aeg.com22
Program Program description
Steam
Cotton, synthetic and mixed items. Special steam cycle without
washing that can be used to prepare your dried laundry for
ironing or refreshing garments worn once. This program re‐
duces creases, odours and relaxes the fibres. Do not use any
detergent.
When the program is completed, quickly remove the laun‐
dry from the drum2). If necessary, remove stains by washing or
using localized stain removal. Steam programs do not per‐form
any hygienic cycle. Do not set a Steam program with these
types of items:
• Items that are not suitable for tumble drying.
• Items with label "Dry clean only".
Bedlinen XL
Specific cycle developed for bed linen items (up to three bedli‐
nen sets, one of which can be double size). Temperature set‐
tings and washing cycle duration are selected to obtain good
washing performance in your daily cycles.
Hygiene
White cotton items. This high-performance wash program
combined with steam vapour, removes more than 99,99% of
bacteria and viruses3) keeping the temperature above 60°C
throughout the washing phase; with an additional action on the
fibers thanks to a vapour phase, an enhanced rinsing phase
ensures a proper removal of detergent and micro-organism
residues. This program ensures also a proper reduction of
pollens/allergenic items.
Rinse
All fabrics, except woollens and very delicate fabrics. Program
for rinsing and spinning the laundry. The default spin speed is
the one used for cotton programs. Reduce the spin speed
accordingly to the type of laundry. If necessary, set the Extra
Rinse option to add rinses. With a low spin speed the ap‐
pliance performs delicate rinses and a short spin.
Spin/Drain
To spin the laundry and to drain the water in the drum. All fab‐
rics, except woollens and delicate fabrics.
1) During this cycle the drum rotates slowly to ensure a gentle wash. It can seem that the drum doesn't
rotate or doesn't rotate properly, but this is normal for this program.
2) If you set a Steam program with dried laundry, at the end of the cycle the laundry can be humid. Line
dry the items for about 10 minutes. This program does not remove particularly intense odour.
3) Tested for Staphylococcus aureus, Enterococcus faecium, Candida albicans, Pseudomonas
aerugino‐sa and MS2 Bacteriophage in external test performed by Swissatest Testmaterialien AG in
2021 (Test Report No. 202120117).
ENGLISH 23
Program temperature, maximum spin speed and maximum load
Program Default tempera‐
ture
Temperature
range
Reference spin
speed
Spin speed range
Maximum load
PowerClean 59min
30 °C
60 °C - 30 °C
1400 rpm
1400 rpm - 400 rpm 5.0 kg
Cotton Eco 1)
40 °C
60 °C - 40 °C
1400 rpm
1400 rpm - 400 rpm 9.0 kg
Cottons
40 °C
95 °C - Cold
1400 rpm
1400 rpm - 400 rpm 9.0 kg
Synthetics
40 °C
60 °C - Cold
1200 rpm
1200 rpm - 400 rpm 4.0 kg
Delicates
30 °C
40 °C - Cold
800 rpm
1200 rpm - 400 rpm 2.0 kg
Wool
40 °C
40 °C - Cold
1200 rpm
1200 rpm - 400 rpm 2.0 kg
20min 3kg
30 °C
40 °C - 30 °C
1200 rpm
1400 rpm - 400 rpm 3.0 kg
Steam - - 1.0 kg
Bedlinin XL
30 °C
60 °C - Cold
1200 rpm
1200 rpm - 400 rpm 4.5 kg
Hygiene 60 °C 1400 rpm
1400 rpm - 400 rpm 9.0 kg
Rinse -1400 rpm
1400 rpm - 400 rpm 9.0 kg
Spin/Drain -1400 rpm
1400 rpm - 400 rpm 9.0 kg
1) The cotton program at 40 °C with the option is recommended for a full load of normally soiledECO
cotton and is the water and energy rating label program in accordance with AS/NZS2040.2 and AS/
NZS6400.
10.3 Steam programs
The Steam programs can be used for
reducing wrinkles and odours on
garments (such as cottons, synthetics,
mixed fabrics, including delicates) that
just need to be refreshed, in a short time,
avoiding washing.
The fabric fibres are relaxed and
afterwards ironing becomes effortless.
When the cycle is completed, quickly
remove the laundry from the drum.
The cycle duration can be reduced till 15
minutes by means of the Time Save
option.
www.aeg.com24
DO NOT set this mode with the following
type of items:
• Items that are not suitable for tumble
drying.
• Items with label "Dry clean only".
Do not use any detergent!
The Steam programs do not
remove particularly intense
odour and do not perform
any hygienic cycle.
After the steam treatment
the laundry can be humid.
Hang items out for a few
minutes.
10.4 Woolmark Wool Care - Green
The wool wash cycle of this machine has
been approved by The Woolmark Company
for the washing of wool garments labelled as
«hand wash» provided that the products are
washed according to the instructions on the
garment label and those issued by the manu‐
facturer of this washing machine. M1361
The Woolmark symbol is a Certification mark
in many countries.
10.5 Options compatibility with programs
Additional programs and settings are available downloading the APP.
PowerClean 59min
Cotton Eco
Cottons
Synthetics
Delicates
Wool
20min 3kg
Steam
Bedlinen XL
Hygiene
Rinse
Spin/Drain
Spin ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
Rinse Hold ■ ■ ■ ■ ■ ■ ■ ■
Extra Silent ■ ■ ■ ■
No Spin ■1)
ENGLISH 25
PowerClean 59min
Cotton Eco
Cottons
Synthetics
Delicates
Wool
20min 3kg
Steam
Bedlinen XL
Hygiene
Rinse
Spin/Drain
Stains 2) ■ ■ ■ ■
Prewash ■■■
Time Save 3) ■ ■ ■ ■ ■
Extra Rinse ■ ■ ■ ■ ■ ■ ■ ■
Plus Steam 2) ■ ■ ■ ■ ■ ■
Capsules ■ ■ ■ ■ ■ ■ ■ ■
Finish In ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
1) If you set the No Spin option, the appliance performs draining only.
2) This option is not available with temperature lower than 40 °C.
3) If you set the shortest duration, we recommend that you decrease the load size. It is possible to fully
load the appliance, however the washing results can be less satisfactory.
Suitable detergents for washing programs
Program Universal
powder1)
Liquid Uni‐
versal
Liquid for
coloureds
Delicates
woollens
Special
PowerClean
59min -- ▲ ▲ -- --
Cottons Eco ▲ ▲ ▲ -- --
Cottons ▲ ▲ ▲ -- --
Synthetics ▲ ▲ ▲ -- --
Delicates -- -- -- ▲ ▲
Wool -- -- -- ▲ ▲
20min 3kg -- ▲ ▲ -- --
Bedlinen XL -- -- -- ▲ ▲
Hygiene ▲ ▲ -- -- ▲
1) At temperature higher than 60 °C the use of powder detergent is recommended.
www.aeg.com26
▲ = Recommended -- = Not recommended
11. WI-FI - CONNECTIVITY SETUP
This chapter describes how to connect
the smart appliance to the Wi-Fi network
and to link it to mobile devices.
By this functionality you can receive
notifications, control and monitor your
appliance from your mobile devices.
The Wi-Fi functionality is off as factory
default setting.
To connect the appliance to enjoy the full
range of features and services you need:
• Wireless network at home with
internet connection enabled.
• Mobile device connected to wireless
network.
Frequency 2.4 GHz according to lo‐
cal country regulation
Protocol IEEE 802.11b/g/n
Max power According to local coun‐
try regulation
Minimum requirements:
Operating system
compatibility iOS 15/Android
7.1 and above. Install the
AEG App, create an account
and accept the Terms and
Conditions and AEG Privacy
Policy to use the connected
features. Stable Internet and
good Wi-Fi connection with
2.4GHz wireless frequency
is required. Minimum
requirements, apps and
services are subject to
change without notice.
11.1 QR code on rating plate
00000000
00A
Mod. xxxxxxxxx
000V ~ 00Hz 0000 W
910000000 00
Prod.No.
SCANNING...
QR code can be used in two ways:
• Scan the QR code with the built-in
camera app to register your product.
• Pairing your smart device with
appliance to simplify the process.
Scan the QR code with QR code
scanner built-in AEG App application.
11.2 Installing and
configuring AEG App
AEG App allows you to
control your laundry through
a mobile device.
It contains a large number of
programs, useful features
and product information
tailored perfectly to the
appliance.
Through the app you can
select the programs already
available from the appliance
control panel, plus unlock
additional programs
available only from a mobile
device.
Additional programs can
change over the time along
with new versions of the
app.
It's personalized laundry
care - all from your mobile
device.
ENGLISH 27
When connecting the appliance to the
application, stand near it with your smart
device.
Make sure that your smart device is
connected to the wireless network.
1. Go to the App Store on your smart
device or scan QR code (
see 'QR
code on rating plate' paragraph
).
2. Download and install the AEG App
App.
3. Make sure you started a Wi-fi
connection in the appliance. If not,
read the next paragraph 'Configuring
the appliance wireless connection'.
4. Start the application. Select the
country and language and login with
Your email and password. If you do
not have an account, create a new
one following the instructions in AEG
App.
5. Follow the instructions on the App for
the appliance registration and
configuration.
11.3 Configuring the
appliance wireless
connection
1. Press the On/Off button for a few
seconds to activate the appliance.
Wait about 10 seconds before
proceeding with wireless
configuration.
2. Select a program by turning the
program dial.
3. Press and hold the Remote Start
button for a few seconds until a 'click'
sounds. Release the button.
appears on the display for 5 seconds
and the indicator starts blinking.
The wireless module begins starting up.
Make sure that you APP is
ready for connection.
4. After about 10 seconds,
( ) appears on theAccess Point
display.
The access point will be open for about 3
minutes.
5. Configure the AEG App app on your
smart device and follow the
instructions to connect the appliance
to your Wi-Fi network.
6. If the connectivity is configured, when
the program information screen
returns, the indicator is on the
display.
Every time you switch the
appliance on, the appliance
takes about 10 seconds to
connect to the network
automatically. When the
indicator stops blinking
the connection is ready.
To switch the wireless connection off,
press and hold the Remote Start
button for a few seconds until the first
acoustic signal. Release the button.
appears on the display for 5
seconds.
If you switch the appliance
off and on again, the
wireless connection is
automatically off.
To remove the wireless credentials,
press and hold the Remote Start
button for a few seconds until the second
www.aeg.com28
acoustic signal: appears on the
display for a few seconds.
11.4 Remote Start
The Remote Start enables you to start a
cycle in remote control.
The Remote Control
activates automatically when
you press the Start / Pause
button to start the
program, but it is also
possible to start a washing
program remotely. This
function is deactivated when
door is open.
When the App is installed and the
wireless connection is complete, you can
activate the Remote Start:
1. Touch the Remote Start button
and the indicator blinks on the
display for a few seconds.
2. Touch the Start / Pause button to
activate the Remote Start before the
indicator stops blinking.
The indicators and appear on the
program summary screen and the door is
locked. Now it is possible to start the
program remotely.
When touching the Start /
Pause button after the
indicator stops
blinking, the Remote Start is
not activated, but the set
program starts.
To remove the Remote Start, tap on the
Remote Start button and confirm by
pressing the Start / Pause button.
11.5 Over-the-air update
The App may propose an update for your
appliance.
The update is accepted via App only.
If a program is running, the App notifies
that the update will start at the end of the
program.
During the update, the appliance shows
in the display.
Do not switch off or unplug the appliance
during update.
The appliance will usable again at the
end of the update, without any
notification about successful update.
If an error occurs, the appliance shows
in the display: just press any
buttons or turn the knob to return to
normal use.
11.6 Wi-Fi Always On
The Wi-Fi Always On function is
available in the App.
This function keeps the appliance
connected to the network even when the
appliance is turned off.
The indicator goes on and off
intermittently (1 second on , 5 seconds
off).
It is possible to turn the appliance on by
pressing the On/Off button or through
the App.
The Wi-Fi Always On
function may affect your
energy consumption.
12. DAILY USE
WARNING!
Refer to Safety chapters.
ENGLISH 29
12.1 Activating the appliance
1. Connect the mains plug to the mains
socket.
2. Open the water tap.
3. Press the On/Off button for a few
seconds to activate the appliance.
A short tune sounds. The appliance
automatically proposes a default
program. The relevant indicator
illuminates.
The display shows the cycle duration, the
maximum load (for a few seconds), the
default temperature, the default spin
speed and the indicators of the phases
making up the program.
12.2 Loading the laundry
1. Open the appliance door.
2. Shake the items before you put them
in the appliance.
3. Put the laundry in the drum, one item
at a time.
Make sure not to put too much laundry in
the drum.
4. Close the door firmly.
CAUTION!
Make sure that no laundry
stays between the seal and
the door. There is a risk of
water leakage or damage to
the laundry.
CAUTION!
Washing heavily oiled,
greasy stains could cause
damage rubber parts of the
washing machine.
12.3 Filling the detergent and
additives
- Compartment for detergent pods
(Max 2 pods). When using detergent tab‐
lets, make sure that the Pods® option is
activated.
- Compartment for prewash phase
an soak program (powder detergent only).
- Compartment for washing phase
(powder detergent only).
Make sure that the Pods®
option is deactivated when
using this compartment.
If using liquid detergent, re‐
member to insert the con‐
tainer for liquid detergent
.
- Compartment for fabric softener
and other liquid treatments (fabric condi‐
tioner, starch).
- Always follow the instructions that
you find on the packaging of the detergent
products, but we recommend that you do
not exceed the maximum indicated level
( ). This quantity will however guaran‐
tee the best washing results.
www.aeg.com30
The program or the delay start continues.
When the icon goes off, the door can
be opened when the program is
complete. You may also set a spinning or
draining program/option and than press
Start / Pause button. If the spin and
drain programs are not available in the
program dial, they can be set via App.
12.12 End of the program
When the program has finished, the
appliance stops automatically. The
acoustic signals operate (if they are
active).
In the display all washing phase
indicators become steady and the time
area shows .
The indicator of the Start / Pause
button goes off.
The door unlocks and the indicator
goes off.
1. Press the On/Off button to
deactivate the appliance.
After five minutes from the end of the
program, the energy saving function
automatically deactivates the appliance.
When you activate the
appliance again, the display
show the end of the last
selected program. Turn the
program dial to set a new
cycle.
2. Remove the laundry from the
appliance.
3. Make sure that the drum is empty.
4. Keep the door and the detergent
dispenser slightly ajar to prevent
mildew and odours.
5. Close the water tap.
12.13 Draining water out after
end of cycle
If you have chosen a program or an
option that does not empty out the water
of the last rinse, the program is
completed, but:
• The display shows the indicator , the
option indicator or and the
door locked indicator . The
indicator of the running phase
flashes.
• The drum still turns at regular
intervals to prevent the creases in the
laundry.
• The door stays locked.
• You must drain the water to open the
door:
1. If necessary, touch the Spin button to
decrease the spin speed proposed
by the appliance.
2. Touch the Start / Pause button:
• If you have set , the appliance
drains the water and spins.
• If you have set , the appliance
only drains the water.
The option indicator or goes off,
while the indicator flashes and then
goes off.
3. When the program is completed and
the door locked indicator goes
off, you can open the door.
4. Press the On/Off button a few
seconds to deactivate the appliance.
In any case, the appliance
empties the water out
automatically after
approximately 18 hours.
12.14 Stand-by option
The Stand-by function automatically
deactivates the appliance to decrease
the energy consumption when:
• You do not use the appliance for 5
minutes before you touch the Start /
Pause button.
Press the On/Off button to activate
the appliance again.
• After 5 minutes from the end of the
washing program
Press the On/Off button to activate
the appliance again.
The display shows the end of the last
set program.
Turn the program dial to set a new
cycle.
www.aeg.com34

Produkt Specifikationer

Mærke: AEG
Kategori: Vaskemaskine
Model: LF8594O8O

Har du brug for hjælp?

Hvis du har brug for hjælp til AEG LF8594O8O stil et spørgsmål nedenfor, og andre brugere vil svare dig


Vaskemaskine AEG Manualer

AEG

AEG LWX60746B Manual

10 Januar 2025
AEG

AEG LTR6G26A Manual

30 December 2025
AEG

AEG L7WE74634BI Manual

30 December 2025
AEG

AEG L6SE26SRE Manual

6 December 2024
AEG

AEG L6SE27SRE Manual

5 December 2024
AEG

AEG L6SE47SRE Manual

5 December 2024
AEG

AEG LTR6E60379 Manual

5 December 2024
AEG

AEG LTR8E81379 Manual

5 December 2024
AEG

AEG LTR7E71379 Manual

5 December 2024
AEG

AEG LTR6E61269 Manual

5 December 2024

Vaskemaskine Manualer

Nyeste Vaskemaskine Manualer

Vedette

Vedette VLT1155W Manual

22 Marts 2025
Vedette

Vedette VLT612E2 Manual

22 Marts 2025
Vedette

Vedette VLT6112at Manual

22 Marts 2025
Vedette

Vedette LTV6011 Manual

22 Marts 2025
Vedette

Vedette VED6012EL Manual

22 Marts 2025
Vedette

Vedette VT16022Q Manual

22 Marts 2025
Vedette

Vedette VT16024Q Manual

22 Marts 2025
Vedette

Vedette TVC651 Manual

22 Marts 2025
Vedette

Vedette VT6522Q Manual

22 Marts 2025
Vedette

Vedette VT602BQ Manual

22 Marts 2025