Allen & Heath Vision Manual


Læs nedenfor 📖 manual på dansk for Allen & Heath Vision (4 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 5 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/4
ALLEN
&
HEATH VISION SERIES
OVERVIEW
The Allen
&
Heath VISION Series is the lowest cost member of the Scepter family of powerful U.S. designed and
manufactured sound reinforcement consoles. Vision is ideal for people who need a professional but affordable table
top Stereo or Mono live sound console that can easily produce quality results, with ease of operation.
Like other members of the Scepter Family, Vision offers excellent performance and versatility. At the heart of the Vision
Series is a unique internal solder jumper system. As an example, the four aux channel sends can be individually
selected between post fader, pre fader, or pre
fader/pre
EQ signal source positions. An additional jumper selection
sets operation of the mute switch to control the pre EQ monitor send. This jumper selection allows contractors to
customize the console to their installation, rather than the usual method of designing an installation around a console.
Operation is simplified with the inclusion of multiple sample point peak indicators and dynamic signal present indicators
that vary in intensity with input channel signal levels. PFL (Pre Fader Listen) switches enable the user to hear any
selected signal in his headphone or control room speaker system, and to see the signal on the monitor meters. PFL,
Peak LED and Signal Present LED indicators remain active even when a channel is muted. Peak indicators are
provided within the master section to monitor the Left and Right summing amplifiers, helping the user avoid unwanted
distortion.
All input channels employ electronically balanced microphone and line inputs. Self compensating Electronically
Balanced outputs are provided on the Left, Right, and Mono channels and may be optionally fitted on any of the 4
auxiliary mix outputs. Optional microphone input transformers and output transformers for Left, Right, and Mono in
place of the electronic balancing circuitry are available for use in ultra-critical applications.
Besides channel inputs, Vision also provides two separate stereo inputs, each having access to two auxiliary monitor
circuits. These inputs can be reconfigured for mono operation with a front panel mounted switch.
No longer will the operator need to decide if he should use the left or right stereo signal for his mono feed. Both Stereo
and Mono Outputs are provided. Internal solder jumpers allow the Mono output to be
sourced
Post Left/Right faders,
Pre Left/Right Faders, or the position all Visions are shipped, Pre
Fader/Pre
Insert point. Inset-t points within the
left
and right signal path allows these faders to be used as sub masters when the internal jumpers are moved to the posl
fader position.
Cosmetics of installation are improved with the front panel having an attractive slope, with all connectors mounted on
the rear panel out of the sight of the user. Designed for your applications of today and tomorrow, Vision will provide
you with the performance, quality and value you have been looking for.
Allen
&
Heath USA, Five Connair Road, Orange, CT 06477 Tel:
(203)795-3594
Fax:
(203)795-6814


Produkt Specifikationer

Mærke: Allen & Heath
Kategori: Ikke kategoriseret
Model: Vision

Har du brug for hjælp?

Hvis du har brug for hjælp til Allen & Heath Vision stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Allen & Heath Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Elektron

Elektron Overbridge Manual

26 November 2024
Elektron

Elektron Sidstation Manual

26 November 2024
SoundTube

SoundTube IPD-RS82-EZ Manual

26 November 2024
Kramer

Kramer 4x1VB Manual

26 November 2024
Kramer

Kramer RC-63A Manual

26 November 2024
SoundTube

SoundTube IPD-HP82-EZ Manual

26 November 2024
Kramer

Kramer RK-KVM-1U-PP3 Manual

26 November 2024
Gioteck

Gioteck VX-2 (PS3) Manual

26 November 2024