Alpine S-W8D2 Manual

Alpine Subwoofer S-W8D2

Læs nedenfor 📖 manual på dansk for Alpine S-W8D2 (8 sider) i kategorien Subwoofer. Denne guide var nyttig for 2 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF
Side 1/8
R/S-DB8V-TRK Truck Enclosure Installation Manual
Compatible with the following models:
R2-W8D2
S-W8D2
Introduction
Congratulations on purchasing this truck enclosure. This installation manual is designed to take you through the step-
by-step installation of the ‘R’ or ‘S’ Series Dual 8” Subwoofer Vented Enclosure for Trucks. Please familiarize yourself
with the owners manual and if you still have additional questions please contact our support team at 1-800-TECH-
101.
Note: To ensure safe use, Always follow these precautions.
The installation of this product requires specialized skills and experience. We recommend that you have the product
installed by an Alpine authorized dealer.
Before you use this product, be sure to carefully read this installation manual so that you can use the product
correctly, Failing to do so could lead to damaged equipment or an accident. Alpine Electronics bears no responsibility
for problems that arise as a result of failure to follow the instructions in the manual.
Make sure enclosure is secured to the vehicle. Failing to do so can lead to electric shock, injury or damage to
equipment.
When making a hole in the vehicle body, be careful to avoid damaging pipes, the fuel tank, electrical wiring,
and the like. This kind of damage could lead to an accident or fire.
Do not install the product where it may be exposed to water or in a place with high levels of humidity or dust.
Doing so could lead to fire or damaged equipment.
Start all screw threads by hand and avoid overtourqing screws, failure to do so may damage your equipment.
Matching Alpine mono ampliers are sold separately - check with an Alpine authorized dealer.
Recommended Amplifier settings
R-A75M amp S-A60M amp
Gain=1 o’clock position
LP Filter=70Hz
Bass EQ=0 (Off)
Subsonic Filter=30Hz
Gain=1 o’clock position
LP Filter=70Hz
Bass EQ=0 (Off)
(Note: If available with your HU/DSP -
We recommend a Subsonic lter, if possible
with Fc=30Hz @-24dB/Oct.)

Produkt Specifikationer

Mærke: Alpine
Kategori: Subwoofer
Model: S-W8D2

Har du brug for hjælp?

Hvis du har brug for hjælp til Alpine S-W8D2 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Subwoofer Alpine Manualer

Alpine

Alpine S-W10D2 Manual

18 September 2024
Alpine

Alpine R-W10D2 Manual

8 September 2024
Alpine

Alpine SS-SB12 Manual

24 August 2024
Alpine

Alpine RS-W12D4 Manual

7 August 2024
Alpine

Alpine RS-W10D4 Manual

4 August 2024
Alpine

Alpine PWD-X5 Manual

3 August 2024
Alpine

Alpine RS-W10D2 Manual

3 August 2024
Alpine

Alpine R2-W8D2 Manual

3 August 2024
Alpine

Alpine R-W10D4 Manual

2 August 2024
Alpine

Alpine KTE-8G.3 Manual

2 August 2024

Subwoofer Manualer

Nyeste Subwoofer Manualer

Infinity

Infinity BassLink T Manual

19 November 2024
Infinity

Infinity SW-12 Manual

19 November 2024
Infinity

Infinity BU-120 Manual

19 November 2024
Infinity

Infinity BU-80 Manual

19 November 2024
Taga Harmony

Taga Harmony TSW-90 V4 Manual

18 November 2024
Taga Harmony

Taga Harmony TSW-60 Manual

18 November 2024
Monitor Audio

Monitor Audio CLG-W12 Manual

18 November 2024
Klipsch

Klipsch RSW-10 Manual

18 November 2024
Martin Logan

Martin Logan Dynamo 1000 Manual

17 November 2024
JL Audio

JL Audio Stealthbox SB-T-TACDC12/10TW3 Manual

16 November 2024