Amprobe TP254A Manual


Læs nedenfor 📖 manual på dansk for Amprobe TP254A (2 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 36 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
INTRODUCTION
The Temperature Probe Series consists of thermocouple sensors. The models are designed for specific measurement
applications such as liquids, solids, gases and surfaces (see reverse side). These probes are designed to operate with
Amprobe temperature sensing multimeters, or the Amprobe Model TC-253C Temperature /Voltage Converter DMM
accessory.
THERMOCOUPLE PROBES
Probes use Type K (chromel-alumel) thermocouple sensors for a wide temperature range. Five models are available
for specific applications (see reverse side). All probes use a standard compensated mini-connector for attachment
directly to the meter or MH101KA Probe Handle. Accuracy is rated at ±1°C, ±2°F, or 0.4% of reading, whichever is
greater.
Note: When using with multimeters, thermocouple plug must be unplugged for direct voltage, resistance, or
current measurements.
Limited Warranty and Limitation of Liability
Your Amprobe product will be free from defects in material and workmanship for 1 year from the date of purchase. This warranty does not
cover fuses, disposable batteries or damage from accident, neglect, misuse, alteration, contamination, or abnormal conditions of operation
or handling. Resellers are not authorized to extend any other warranty on Amprobe’s behalf. To obtain service during the warranty period,
return the product with proof of purchase to an authorized Amprobe Test Tools Service Center or to an Amprobe dealer or distributor. See
Repair Section for details. THIS WARRANTY IS YOUR ONLY REMEDY. ALL OTHER WARRANTIES - WHETHER EXPRESS, IMPLIED OR STAUTORY -
INCLUDING IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY, ARE HEREBY DISCLAIMED. MANUFACTURER
SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LOSSES, ARISING FROM ANY CAUSE OR
THEORY. Since some states or countries do not allow the exclusion or limitation of an implied warranty or of incidental or consequential
damages, this limitation of liability may not apply to you.
Temperature Probe Series
Application and Descriptions
SYMBOLS
Caution, risk of electric shock
Refer to the manual
® Amprobe 2007


Produkt Specifikationer

Mærke: Amprobe
Kategori: Ikke kategoriseret
Model: TP254A

Har du brug for hjælp?

Hvis du har brug for hjælp til Amprobe TP254A stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Amprobe Manualer

Amprobe

Amprobe AD40B Manual

28 September 2024
Amprobe

Amprobe TMD-55W Manual

19 August 2024
Amprobe

Amprobe THWD-10W Manual

15 August 2024
Amprobe

Amprobe WT-20 Manual

13 August 2024
Amprobe

Amprobe VPC-10 Manual

12 August 2024
Amprobe

Amprobe TP110KA Manual

11 August 2024
Amprobe

Amprobe BAT-100 Manual

11 August 2024
Amprobe

Amprobe AT-4001-A Manual

4 August 2024
Amprobe

Amprobe FLASH-80 Manual

4 August 2024
Amprobe

Amprobe AC50A Manual

4 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Smeg

Smeg KIT6PX Manual

23 December 2024
Smeg

Smeg KIT6CX Manual

23 December 2024
Smeg

Smeg GTA-6 Manual

23 December 2024