AMX VARIA-SL50 Manual

AMX Ikke kategoriseret VARIA-SL50

Læs nedenfor 📖 manual på dansk for AMX VARIA-SL50 (2 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 14 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
QUICK START GUIDE
-VARIA SL50
Overview
The AMX V - 50 ARIA SL (AMX-UTP0501) 5.5” Ultra-Slim, Wall- , Mount Professional-
Grade, Persona- Defined Touch Panel redefines control with personas that fit any
application. Personas include Web Kiosk, Zoom Rooms Controller, AMX Book
Scheduling, and AMX G5 Control.
Settings Button
Function Button
Sensors USB
Microphone Side LED LAN/POE
FIG. 1 V - T P AMX ARIA SL50 ouch anel
Product Specifications
Varia SL50 SPECIFICATIONS
Dimensions (HWD)
5 21/
32
x 3 3/
16
x 31/
32
( x x 143.4 mm 80.8 mm 24.3 mm)
Weight
6.1 oz (173 g )
Power Consumption
PoE, 802.3af, 15.4 watt, compatible w/ PoE+
External Power
Supply Required
Optimal performance requires use of one of the
following AMX PoE power supplies (not included):
PS- - -POE AF TC, PoE Injector, 802.3AF
Compliant (FG423- 83)
Certifications &
Compliance
UL
CE
CB
FCC Class B (- 5dB)
Environmental
Operating Temperature
0°C - 40° C (32°F 104°F)
5% - 85% Humidity
Storage Temperature
-2 – 6 (4 – 1 0°C 0° C °F 40°F)
5% - 90% Humidity
Included Accessories
Mounting Plate
Mounting Hardware
Set Screw
VARIA-SL50 Installation
The VARIA- SL50 installs into a standard electrical single gang box (US, UK, EU,
AU) using the included mounting plate.
Power Over Ethernet
Power is supplied via Power Over Ethernet (PoE), utilizing an AMX certified PoE
injector such as the PS- - -POE AF TC PoE Injector (FG423-83) or compatible
network switch which is classified as ES1 and PS2 output in accordance with
IEC/EN/UL 62368-1. Connect the incoming Ethernet cable to the RJ-45 port on
the VARIA- . SL50
Mounting Plate
The included mounting plate contains hole patterns for standard single gang
electrical . boxes in US, UK, EU, & AU
Set Screw Mounting Plate
FIG. 2 Mounting Plate
STEP 1: Installation Prerequisites
Prior to touch panel installation, install single gang electrical box and properly
terminated category cable (networking cable) in accordance with local laws &
building codes.
STEP 2: Install the Mounting Plate
Screw the mounting plate into standard single gang electrical box using
appropriate hardware for the box.
STEP 3: Route Category Cable
Route the networking cable thru the large central hole in the mounting plate and
plug it into the RJ- . 45 jack on the back of the touch panel
STEP 4: Mount the Panel to Plate
Using the top tab & slot, insert the panel into the mounting plate. Make sure
the tabs are fully engaged.
STEP 5: Set Screw
Insert & tighten the set screw on the bottom to secure the panel to the mounting
plate.
FIG. 3 Back Box Installation Examples
Caution: This product is only suitable for installations less than or equal to 2m
(6.56ft) high for CE/UL safety.
Removing
To remove the panel, follow the installation directions in reverse.


Produkt Specifikationer

Mærke: AMX
Kategori: Ikke kategoriseret
Model: VARIA-SL50

Har du brug for hjælp?

Hvis du har brug for hjælp til AMX VARIA-SL50 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret AMX Manualer

AMX

AMX HPG-20 Manual

7 December 2024
AMX

AMX TPC-WIN8-TAB Manual

4 September 2024
AMX

AMX NMX-DEC-N1222A Manual

4 September 2024
AMX

AMX NMX-DEC-N2222A Manual

4 September 2024
AMX

AMX NMX-DEC-N1233 Manual

4 September 2024
AMX

AMX NMX-DEC-N2211 Manual

4 September 2024
AMX

AMX NMX-ENC-N1134A Manual

4 September 2024
AMX

AMX NMX-ENC-N1133 Manual

4 September 2024
AMX

AMX NMX-ENC-N2315-WP Manual

4 September 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer