Anton/Bauer QRC-CA940 Manual


Læs nedenfor 📖 manual på dansk for Anton/Bauer QRC-CA940 (1 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 5 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/1
Approved Copy
World Headquarters 14 Progress Drive, Shelton, CT 06484 U.S.A. Tel (203) 929-1100 support@antonbauer.com
Europe Eurode Business Center, Eurode-Park 1-2, 6461KB Kerkrade, The Netherlands Tel +31 45-5639220 eurosupport@antonbauer.com
Singapore 6 New Industrial Road, #02-02 Hoe Huat Ind. Bld., Singapore 536199 Tel +65 62975784 asiasupport@antonbauer.com
www.antonbauer.com
7595-0395 Rev A
One World. One Smart Choice
®
QR-VBG
Installation Instructions
This special Anton/Bauer® Gold Mount®
b
racket allows you to use your existing Logic
Series® batteries to power any Panasonic
® camera that is compatible with the Panasonic
model VWVBG series batteries. An internal DC to DC converter automatically brings dow
n
the voltage of a 14.4 volt battery to 7.2 volts in order to power the camera. Simply snap
a
b
attery onto the Gold Mount adapter and plug the power cord into the camera. The bracket’s
on-board PowerTap® also provides an additional 14.4 VDC nominal auxiliary DC output fo
r
Ultralight 2, or any other piece of equipment that may be powered by a 12 VDC (11-17VDC)
DC source (50 watts maximum). The small size of DIONIC
® 90, or HyTRON® 50 batteries
allows you to carry them in the supplied pouch on your belt for comfort and ease. Any othe
Anton/Bauer battery can be used on this mount, however, due to size; they cannot fit into the
pouch.
The QR-VBG can be mounted to various third party shoulder support systems such as
Redrock® Micro*, Cinevate®, Shape®, Zacuto®, and others that incorporate the Anton/Baue
r
mounting hole pattern in their design. This can be achieved by removing the sheet metal bac
k
plate on the QR-VBG and then using the existing four (4) screws to attach the QR-VBG to
the shoulder support system.
*If attaching to a RedRock Microsystems cheese plate you may need one (1) back
p
late (P/N
5115-0405), and four (4) screws (P/N 6120-5522).
Use of unauthorized equipment in conjunction with Anton/Bauer products constitutes misuse under our warranties and may limit o
r
void those warranties. Anton/Bauer does not authorize, condone, recommend, or otherwise assume any liability or responsibilit
y
resulting from the use of any battery, charger, or accessory made by Anton/Bauer with any battery, charger, or accessory no
t
manufactured, produced or sold by Anton/Bauer unless otherwise indicated.
Panasonic® is a trademark or registered trademark of Panasonic registered in the US or other countries.
RedRock® is a trademark or registered trademark of RedRock registered in the US or other countries.
Cinevate® is a trademark or registered trademark of Cinevate registered in the US or other countries.
Shape® is a trademark or registered trademark of Shape registered in the US or other countries.
Zacuto® is a trademark or registered trademark of Zacuto registered in the US or other countries.
All brands, trademarks, and registered trademarks are the property of their respective holders.
A7595-0395 Rev A
DA-F636 Sht 1 of 1
®


Produkt Specifikationer

Mærke: Anton/Bauer
Kategori: Ikke kategoriseret
Model: QRC-CA940

Har du brug for hjælp?

Hvis du har brug for hjælp til Anton/Bauer QRC-CA940 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Anton/Bauer Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Märklin

Märklin 72886 Manual

24 Januar 2025
Märklin

Märklin 72797 Manual

24 Januar 2025
Märklin

Märklin 7001 Manual

24 Januar 2025
Hilti

Hilti KCC-WF Manual

24 Januar 2025
Märklin

Märklin 7051 Manual

24 Januar 2025
ATen

ATen KH1516Ai Manual

24 Januar 2025
Adonit

Adonit PD-3A2C Manual

24 Januar 2025
Adonit

Adonit Dash 4 Manual

24 Januar 2025