AOC CQ32G3SE Manual

AOC Skærm CQ32G3SE

Læs nedenfor 📖 manual på dansk for AOC CQ32G3SE (28 sider) i kategorien Skærm. Denne guide var nyttig for 38 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/28

www.aoc.com

LCD Monitor User Manual

CQ32G3SE

Safety 1 ...................................................................................................................................................................................

National Conventions 1 ................................................................................................................................................

Power 2 ........................................................................................................................................................................

Installation 3 .................................................................................................................................................................

Cleaning 4 ....................................................................................................................................................................

Other 5 .........................................................................................................................................................................

Setup 6 ....................................................................................................................................................................................

Contents in Box 6 .........................................................................................................................................................

Setup Stand & Base 7 ..................................................................................................................................................

Adjusting Viewing Angle ............................................................................................................................................ 8

Connecting the Monitor 9 .............................................................................................................................................

Wall Mounting.......................................................................................................................................................... 10

Adaptive-Sync function ............................................................................................................................................11

Adjusting 12 .............................................................................................................................................................................

Hotkeys 12 ...................................................................................................................................................................

OSD Setting 13 ............................................................................................................................................................

Luminance 14 ...................................................................................................................................................

Color Setup 15 ..................................................................................................................................................

Picture Boost 16 ...............................................................................................................................................

OSD Setup 17 ...................................................................................................................................................

Game Setting 18 ...............................................................................................................................................

Extra 19 ............................................................................................................................................................

Exit 20 ...............................................................................................................................................................

LED Indicator 21 ..........................................................................................................................................................

Troubleshoot 22 .......................................................................................................................................................................

Specication ....................................................................................................................................................................... 23

General Specication .............................................................................................................................................. 23

Preset Display Modes 24 .............................................................................................................................................

Pin Assignments ...................................................................................................................................................... 25

Plug and Play 26 ..........................................................................................................................................................

Safety

National Conventions

The following subsections describe notational conventions used in this document.

Notes, Cautions, and Warnings

Throughout this guide, blocks of text may be accompanied by an icon and printed in bold type or in italic type. These

blocks are notes, cautions, and warnings, and they are used as follows:

NOTE: A NOTE indicates important information that helps you make better use of your computer system.

CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the

problem.

WARNING: A WARNING indicates the potential for bodily harm and tells you how to avoid the problem. Some warnings

may appear in alternate formats and may be unaccompanied by an icon. In such cases, the specic presentation of the

warning is mandated by regulatory authority.

Power

The monitor should be operated only from the type of power source indicated on the label. If you are not sure of the

type of power supplied to your home, consult your dealer or local power company.

The monitor is equipped with a three-pronged grounded plug, a plug with a third (grounding) pin. This plug will t

only into a grounded power outlet as a safety feature. If your outlet does not accommodate the three-wire plug, have an

electrician install the correct outlet, or use an adapter to ground the appliance safely. Do not defeat the safety purpose of

the grounded plug.

Unplug the unit during a lightning storm or when it will not be used for long periods of time. This will protect the

monitor from damage due to power surges.

Do not overload power strips and extension cords. Overloading can result in re or electric shock.

To ensure satisfactory operation, use the monitor only with UL listed computers which have appropriate congured

receptacles marked between 100-240V AC, Min. 5A.

The wall socket shall be installed near the equipment and shall be easily accessible.

Installation

Do not place the monitor on an unstable cart, stand, tripod, bracket, or table. If the monitor falls, it can injure a

person and cause serious damage to this product. Use only a cart, stand, tripod, bracket, or table recommended by

the manufacturer or sold with this product. Follow the manufacturer’s instructions when installing the product and use

mounting accessories recommended by the manufacturer. A product and cart combination should be moved with care.

Never push any object into the slot on the monitor cabinet. It could damage circuit parts causing a re or electric

shock. Never spill liquids on the monitor.

Do not place the front of the product on the oor.

If you mount the monitor on a wall or shelf, use a mounting kit approved by the manufacturer and follow the kit

instructions.

Leave some space around the monitor as shown below. Otherwise, air-circulation may be inadequate hence

overheating may cause a re or damage to the monitor.

To avoid potential damage, for example the panel peeling from the bezel, ensure that the monitor does not tilt

downward by more than -5 degrees. If the -5 degree downward tilt angle maximum is exceeded, the monitor damage will

not be covered under warranty.

See below the recommended ventilation areas around the monitor when the monitor is installed on the wall or on the

stand:

Installed with stand

12 inches

30cm

4 inches

10cm

4 inches

10cm

4 inches

10cm

Leave at lease this

space around the set

Cleaning

Clean the cabinet regularly with cloth. You can use soft-detergent to wipe out the stain, instead of strong-detergent

which will cauterize the product cabinet.

When cleaning, make sure no detergent is leaked into the product. The cleaning cloth should not be too rough as it

will scratch the screen surface.

Please disconnect the power cord before cleaning the product.

Other

If the product is emitting a strange smell, sound or smoke, disconnect the power plug IMMEDIATELY and contact a

Service Center.

Make sure that the ventilating openings are not blocked by a table or curtain.

Do not engage the LCD monitor in severe vibration or high impact conditions during operation.

Do not knock or drop the monitor during operation or transportation.

Setup

Contents in Box

CD Manual Warranty card Stand Base

Power Cable HDMI Cable DP Cable

Not all signal cables will be provided for all countries and regions. Please check with the local dealer or AOC branch

oce for conrmation.

Setup Stand & Base

Please setup or remove the base following the steps as below.

Setup:

Remove:

Adjusting Viewing Angle

For optimal viewing it is recommended to look at the full face of the monitor, then adjust the monitor’s angle to your own

preference.

Hold the stand so you will not topple the monitor when you change the monitor’s angle.

You are able to adjust the monitor as below:

NOTE:

Do not touch the LCD screen when you change the angle. It may cause damage or break the LCD screen.

Warning

• To avoid potential screen damage, such as panel peeling, ensure that the monitor does no t tilt downward by more

than -5 degrees.

• Do not press the screen while adjusting the angle of the monitor. Grasp only the bezel.

Connecting the Monitor

Cable Connections In Back of Monitor and Computer:

1 3 4 5

1. HDMI-2

2. HDMI-1

3. DisplayPort

4. Earphone

5. Power

Connect to PC

1. Connect the power cord to the back of the display rmly.

2. Turn o your computer and unplug its power cable.

3. Connect the display signal cable to the video connector on the back of your computer.

4. Plug the power cord of your computer and your display into a nearby outlet.

5. Turn on your computer and display.

If your monitor displays an image, installation is complete. If it does not display an image, please refer Troubleshooting.

To protect equipment, always turn o the PC and LCD monitor before connecting.

Wall Mounting

Preparing to Install An Optional Wall Mounting Arm.

比例

This monitor can be attached to a wall mounting arm you purchase separately. Disconnect power before this procedure.

Follow these steps:

1. Remove the base.

2. Follow the manufacturer’s instructions to assemble the wall mounting arm.

3. Place the wall mounting arm onto the back of the monitor. Line up the holes of the arm with the holes in the back of the

monitor.

4. Insert the 4 screws into the holes and tighten.

5. Reconnect the cables. Refer to the user’s manual that came with the optional wall mounting arm for instructions on

attaching it to the wall.

Noted: VESA mounting screw holes are not available for all models, please check with the dealer or ocial department

of AOC.

* Display design may dier from those illustrated.

WARNING:

1. To avoid potential screen damage, such as panel peeling, ensure that the monitor does not tilt downward by more than

-5 degrees.

2. Do not press the screen while adjusting the angle of the monitor. Grasp only the bezel.

Adaptive-Sync function

1. Adaptive-Sync function is working with DP/HDMI

2. Compatible Graphics Card: Recommend list is as the below, also could be checked by visiting www.AMD.com

Graphics Cards

• Radeon™ RX Vega series

• Radeon™ RX 500 series

• Radeon™ RX 400 series

• Radeon™ R9/R7 300 series （R9 370/X, R7 370/X, R7 265

except）

• Radeon™ Pro Duo (2016)

• Radeon™ R9 Nano series

• Radeon™ R9 Fury series

• Radeon™ R9/R7 200 series (R9 270/X, R9 280/X

except)

Processors

• AMD Ryzen™ 7 2700U

• AMD Ryzen™ 5 2500U

• AMD Ryzen™ 5 2400G

• AMD Ryzen™ 3 2300U

• AMD Ryzen™ 3 2200G

• AMD PRO A12-9800

• AMD PRO A12-9800E

• AMD PRO A10-9700

• AMD PRO A10-9700E

• AMD PRO A8-9600

• AMD PRO A6-9500

• AMD PRO A6-9500E

• AMD PRO A12-8870

• AMD PRO A12-8870E

• AMD PRO A10-8770

• AMD PRO A10-8770E

• AMD PRO A10-8750B

• AMD PRO A8-8650B

• AMD PRO A6-8570

• AMD PRO A6-8570E

• AMD PRO A4-8350B

• AMD A10-7890K

• AMD A10-7870K

• AMD A10-7850K

• AMD A10-7800

• AMD A10-7700K

• AMD A8-7670K

• AMD A8-7650K

• AMD A8-7600

• AMD A6-7400K

Adjusting

Hotkeys

1 Source/Exit

2 Game Mode

3 Dial Point

4 Menu/Enter

5 Power

Menu/Enter

Press to display the OSD or conrm the selection.

Power

Press the Power button to turn on the monitor.

Dial Point

When there is no OSD, press Dial Point button to show / hide Dial Point.

Game Mode

When there is no OSD, press “ ” key to open game mode function, then press “ ” or “ ” key to select game mode (FPS,

RTS, Racing, Gamer 1, Gamer 2 or Gamer 3) basing on the dierent game types.

Source/Exit

When the OSD is closed, press Source/Exit button will be Source hot key function.

OSD Setting

Basic and simple instruction on the control keys.

Luminance Color Setup Picture Boost OSD Setup ExitExtra

Contrast 50

Brightness 90

Eco mode Standard

Gamma Gamma1

DCR Off

HDR DisplayHDR

Game Setting

1). Press the to activate the OSD window. MENU-button

2). Press or to navigate through the functions. Once the desired function is highlighted, press the Left Right

MENU-button to activate it, press or to navigate through the sub-menu functions. Once the desired Left Right

function is highlighted, press to activate it. MENU-button

3). Press or to change the settings of the selected function. Press to exit. If you want to adjust any other Left

function, repeat steps 2-3.

4). OSD Lock Function: To lock the OSD, press and hold the MENU-button while the monitor is o and then press

power button to turn the monitor on. To un-lock the OSD - press and hold the MENU-button while the monitor is

o and then press power button to turn the monitor on.

Notes:

1). If the product has only one signal input, the item of “Input Select” is disable to adjust.

2). ECO modes (except Standard mode), DCR, DCB mode and Picture Boost, for these four states that only one state

can exist.

Produkt Specifikationer

Mærke:	AOC
Kategori:	Skærm
Model:	CQ32G3SE
Vekselstrømsindgangsspænding:	100 - 240 V
Vekselstrømsindgangsfrekvens:	50 - 60 Hz
Produktfarve:	Black, Red
Pakkevægt:	10520 g
Skærm diagonal:	31.5 "
Skærmopløsning:	2560 x 1440 pixel
Berøringsskærm:	Ingen
HD-type:	Quad HD
Skærmteknologi:	LCD
Naturligt aspektforhold:	16:9
Responstid:	1 ms
Synsvinkel, horisontal:	178 °
Synsvinkel, vertikal:	178 °
Skærm form:	Kurvet
Skærm diagonal (metrisk):	80.01 cm
Indbyggede højttaler(e):	Ingen
Antal højttalere:	2
Udgangseffekt (RMS):	5 W
Antal HDMI-porte:	2
HDCP:	Ja
Udgange til hovedtelefoner:	1
OSD-sprog:	CHI (SIMPL), CHI (TR), CRO, CZE, DEU, DUT, ENG, ESP, FIN, FRE, ITA, JPN, KOR, POL, POR, RUS, SWE, TUR, UKR
VESA montering:	Ja
Panel montering grænseflade:	100 x 100 mm
Strømforbrug (standby):	0.3 W
Strømforbrug (typisk):	52 W
Bredde (uden stativ):	700.5 mm
Dybde (uden stativ):	111.2 mm
Højde (uden stativ):	424.2 mm
Vægt (uden stativ):	6290 g
Bredde (med stativ):	700.5 mm
Dybde (med stativ):	263.8 mm
Højde (med stativ):	523.7 mm
Vægt (med stativ):	7020 g
Markedspositionering:	Spil
Strømforbrug (slukket):	0.3 W
High Dynamic Range (HDR) understøttet:	Ja
HDR-teknologi (High Dynamic Range):	High Dynamic Range 10 (HDR10)
Energiforbrug (SDR) pr. 1000 timer:	- kWh
Energiforbrug (HDR) pr. 1000 timer:	- kWh
HDMI:	Ja
Indbygget kamera:	Ingen
Bæredygtighedscertifikater:	WEEE
Paneltype:	VA
Slot til kabellås:	Ja
Hurtig opladning:	Ja
Tilslutning af hovedtelefoner:	3,5 mm
Vis antal farver:	16.7 millioner farver
Farve:	Sort/rød
Indgangsstrøm:	1.5 A
Type af baggrundslys:	W-LED
Maksimal opdateringshastighed:	165 Hz
RGB-farverum:	DCI-P3
sRGB-dækning (typisk):	123 %
Skærmens lysstyrke (typisk):	250 cd/m²
Kontrastforhold (typisk):	3000:1
Kontrastforhold (dynamisk):	80000000:1
Pixel pitch:	0.2724 x 0.2724 mm
Synlig størrelse, horisontal:	697.344 mm
Synlig størrelse, vertikal:	392.256 mm
Adobe RGB dækning:	91 %
Overfladehårdhed:	3H
NTSC-dækning (typisk):	102 %
Lav Blue Light teknologi:	Ja
AMD FreeSync:	Ingen
NVIDIA G-SYNC:	Ingen
Rammeløst design:	Ja
Aftageligt stativ:	Ja
Frontkantfarve:	Sort/rød
HDMI-version:	2.0
DisplayPort-version:	1.4
Indbygget USB-hub:	Ja
Antal DisplayPorts:	1
Udgang til hovedtelefoner:	Ja
Antal USB type-A downstream-porte:	4
Højdejustering:	Ja
Drejevinkel område:	-30 - 30 °
Hældningsvinkelområde:	3.5 - 21.5 °
Kabellåseslids type:	Kensington
Udvendigt finish type:	Tekstureret
Lyseffekter:	Ingen
Stativ inkluderet:	Ja
HDMI-kabellængde:	1.8 m
DisplayPort kabellængde:	1.8 m
Antirefleksskærm:	Ja
Farveområde:	93 %
Hældningsindstilling:	Ja
Bedømmelse af skærmkrumning:	1000R
Farveskala DCI-P3:	91 %