AOC E2260PQ/BK Manual

AOC Skærm E2260PQ/BK

Læs nedenfor 📖 manual på dansk for AOC E2260PQ/BK (73 sider) i kategorien Skærm. Denne guide var nyttig for 25 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/73

Safety ........................................................................................................................................................................ 4

National Conventions ......................................................................................................................................... 4

Power 5................................................................................................................................................................

Installation 6..........................................................................................................................................................

Cleaning 7.............................................................................................................................................................

Other .................................................................................................................................................................. 8

Setup 9........................................................................................................................................................................

Contents of the Box ........................................................................................................................................... 9

Setup Stand & Base ........................................................................................................................................10

Adjusting Viewing Angle ................................................................................................................................... 12

Connecting the Monitor .................................................................................................................................... 14

Wall Mounting .................................................................................................................................................. 15

Adjusting ................................................................................................................................................................. 16

Setting Optimal Resolution .............................................................................................................................. 16

Windows Vista .......................................................................................................................................... 16

Windows XP ............................................................................................................................................. 18

Windows ME/2000 .................................................................................................................................... 19

Windows 8 ................................................................................................................................................ 19

Hotkeys ............................................................................................................................................................ 22

OSD Setting ..................................................................................................................................................... 24

Luminance ................................................................................................................................................ 25

Image Setup ............................................................................................................................................. 27

Color Setup ............................................................................................................................................... 28

Picture Boost ............................................................................................................................................ 29

OSD Setup ............................................................................................................................................... 30

Extra ......................................................................................................................................................... 31

Exit ............................................................................................................................................................32

LED Indicator ................................................................................................................................................... 33

Driver ...................................................................................................................................................................... 34

Monitor Driver .................................................................................................................................................. 34

Windows 2000 .......................................................................................................................................... 34

Windows ME ............................................................................................................................................. 34

Windows XP ............................................................................................................................................. 35

Windows Vista .......................................................................................................................................... 38

Windows 7 ................................................................................................................................................ 40

Windows 8 ................................................................................................................................................ 44

i-Menu .............................................................................................................................................................. 47

e-Saver ............................................................................................................................................................ 48

Screen+ ........................................................................................................................................................... 49

Troubleshoot ........................................................................................................................................................... 50

Speciﬁcation ............................................................................................................................................................53

General Speciﬁcation ....................................................................................................................................... 53

Preset Display Modes ...................................................................................................................................... 58

Pin Assignments .............................................................................................................................................. 62

Plug and Play ................................................................................................................................................... 64

Regulation ............................................................................................................................................................... 65

FCC Notice ...................................................................................................................................................... 65

WEEE Declaration ........................................................................................................................................... 66

WEEE Declaration for India ............................................................................................................................. 66

EPA Energy Star .............................................................................................................................................. 67

EPEAT Declaration .......................................................................................................................................... 68

Warranty Statement for North & South America (excluding Brazil) ........................................................... 73

TCO DOCUMENT ...........................................................................................................................................75

Safe ty

National Conventions

The following subsections describe notational conventions used in this document.

Notes, Cautions, and Warnings

Throughout this guide, blocks of text may be accompanied by an icon and printed in bold type or in italic type.

These blocks are notes, cautions, and warnings, and they are used as follows:

NOTE: A NOTE indicates important information that helps you make better use of your computer system.

CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the

problem.

WARNING: A WARNING indicates the potential for bodily harm and tells you how to avoid the problem. Some

warnings may appear in alternate formats and may be unaccompanied by an icon. In such cases, the speciﬁc

presentation of the warning is mandated by regulatory authority.

Power

The monitor should be operated only from the type of power source indicated on the label. If you are not sure

of the type of power supplied to your home, consult your dealer or local power company.

The monitor is equipped with a three-pronged grounded plug, a plug with a third (grounding) pin. This plug

will ﬁt only into a grounded power outlet as a safety feature. If your outlet does not accommodate the three-wire

plug, have an electrician install the correct outlet, or use an adapter to ground the appliance safely. Do not defeat

the safety purpose of the grounded plug.

Unplug the unit during a lightning storm or when it will not be used for long periods of time. This will protect

the monitor from damage due to power surges.

Do not overload power strips and extension cords. Overloading can result in ﬁre or electric shock.

To ensure satisfactory operation, use the monitor only with UL listed computers which have appropriate

conﬁgured receptacles marked between 100 - 240V ~, Min. 5A

The wall socket shall be installed near the equipment and shall be easily accessible.

For use only with the attached power adapter (Output 12Vdc) which have UL,CSA listed license (Only for

monitors with power adapter).

Installation

Do not place the monitor on an unstable cart, stand, tripod, bracket, or table. If the monitor falls, it can injure a

person and cause serious damage to this product. Use only a cart, stand, tripod, bracket, or table recommended by

the manufacturer or sold with this product. Follow the manufacturer’s instructions when installing the product and

use mounting accessories recommended by the manufacturer. A product and cart combination should be moved

with care.

Never push any object into the slot on the monitor cabinet. It could damage circuit parts causing a ﬁre or

electric shock. Never spill liquids on the monitor.

Do not place the front of the product on the ﬂoor.

If you mount the monitor on a wall or shelf, use a mounting kit approved by the manufacturer and follow the kit

instructions.

Leave some space around the monitor as shown below. Otherwise, air-circulation may be inadequate hence

overheating may cause a ﬁre or damage to the monitor.

See below the recommended ventilation areas around the monitor when the monitor is installed on the wall or on

the stand:

Cleaning

Clean the cabinet regularly with cloth. You can use soft-detergent to wipe out the stain, instead of

strong-detergent which will cauterize the product cabinet.

When cleaning, make sure no detergent is leaked into the product. The cleaning cloth should not be too

rough as it will scratch the screen surface.

Please disconnect the power cord before cleaning the product.

Other

If the product is emitting a strange smell, sound or smoke, disconnect the power plug IMMEDIATELY and

contact a Service Center.

Make sure that the ventilating openings are not blocked by a table or curtain.

Do not engage the LCD monitor in severe vibration or high impact conditions during operation.

Do not knock or drop the monitor during operation or transportation.

Setup

Contents of the Box

Not all signal cables (Analog , Audio, DVI,USB DP and HDMI cables) will be provided for all countries and 、

regions. Please check with the local dealer or AOC branch oﬃce for conﬁrmation.

Setup Stand & Base

Please setup or remove the base following the steps as below.

1>.Setup:

Remove:

2>.Setup:

Remove:

Adjusting Viewing Angle

For optimal viewing it is recommended to look at the full face of the monitor, then adjust the monitor's angle to your

own preference.

Hold the stand so you will not topple the monitor when you change the monitor's angle.

1> You are able to adjust the monitor's angle from -5° to 22 °.

2> You are able to adjust the monitor's angle from -5° to 22 °.

NOTE:

Do not touch the LCD screen when you change the angle. It may cause damage or break the LCD screen.

Wall Mounting

Preparing to Install An Optional Wall Mounting Arm.

This monitor can be attached to a wall mounting arm you purchase separately. Disconnect power before this

procedure. Follow these steps:

1 Remove the base.

2 Follow the manufacturer's instructions to assemble the wall mounting arm.

3 Place the wall mounting arm onto the back of the monitor. Line up the holes of the arm with the holes in the

back of the monitor.

4 Insert the 4 screws into the holes and tighten.

5 Reconnect the cables. Refer to the user's manual that came with the optional wall mounting arm for

instructions on attaching it to the wall.

Noted : VESA mounting screw holes are not available for all models, please check with the dealer or ofﬁcial

department of AOC.

5 Click Display Settings.

6 Set the resolution to Optimal preset resolution SLIDE-BAR

Windows XP

For Windows XP:

1 Click START.

2 Click SETTINGS.

3 Click CONTROL PANEL.

4 Click Appearance and Themes.

5 Double click DISPLAY.

6 Click SETTINGS.

7 Set the resolution to Optimal preset resolution SLIDE-BAR

Windows ME/2000

For Windows ME/2000:

1 Click START.

2 Click SETTINGS.

3 Click CONTROL PANEL.

4 Double click DISPLAY.

5 Click SETTINGS.

6 Set the resolution to Optimal preset resolution SLIDE-BAR

Windows 8

For Windows 8:

1. Right click and click at the bottom-right of the screen. All apps

4. Click DISPLAY.

5. Set the resolution SLIDE-BAR to Optimal preset resolution .

Hotkeys

E2260P /E2260S /E2460PHU HU WHU/E2460SWHU/E2460SHU/E2460PHU：

Source/Auto/Exit

ECO(DCR -Care < /I )/

Volume / >

Menu/Enter

Power

E2060SWDU/E2060S /E960S / E960P /E2060S /E2060PWDAN RDA RDA WDA WDA / E2260SDA/

E2260P E2260PQDA/：

Source/Auto/Exit

ECO(DCR)/<

Volume / >

Menu/Enter

Power

E2060SWDN /E2060SWD/ D/ E2260S ：

Source/Auto/Exit

ECO(DCR)/<

4:3 or Wide > /

Menu/Enter

Power

E2060SWN W /E2060S ：

Auto/Exit

ECO(DCR)/<

4:3 or Wide > /

Menu/Enter

Power

E960SRD：

Source/Auto/Exit

ECO(DCR)/<

Menu/Enter

Power

Press the Power button to turn o oﬀ the monitor. n/

Eco (DCR -Care) /I / <

Press the Eco key continuously to select the Eco mode of brightness -Care on when there is no OSD. and DCR/I

( Eco mode hot key may not be available in all models).

Volume / >

When there is no OSD,Press Volume button to active volume adjustment bar,Press <or + to adjust volume(Only for

the models with speakers)

Auto / Exit

When there is no OSD, press Auto/Source button continuously about second to do auto conﬁgure . 3

Source hot key

When the OSD is closed, press Source button will be Source hot key function. Press Source button continuously

to select the input source showed in the message bar , press Menu/Enter button to change to the source selected

OSD Setting

Basic and simple instruction on the control keys.

1) Press the to activate the OSD window. MENU-button

2) Press to navigate through the functions. Once the desired function is highlighted, press the < or >

to activate press to navigate through the sub-menu functions Once the desired MENU-button it . < >or .

function is highlighted, press to activate it. MENU-button

3) Press to change the settings of the selected function. Press< >or AUTO to exit If you want to adjust .

any other function, repeat steps 2-3.

4) OSD Lock Function: To lock the OSD, press and hold the while the monitor is oﬀ and then MENU button

press to turn the monitor on. To un-lock the OSD - press and hold the power button MENU button

while the monitor is oﬀ and then press to turn the monitor on. power button

Notes:

1) If the product has only one signal input, the item of "Input Select" is disable to adjust.

2) If the product screen size is 4:3 or input signal resolution is wide format, the item of "Image Ratio" is disa e to bl

adjust.

3) One of DCR, Color Boost, and Picture Boost functions is active, the other two function is turned oﬀ accordingly.

Luminance

1 Press (Menu) to display menu.

2 Press or to select (Luminance), and press to enter. < >

3 Press < >or to select submenu, and press to enter.

4 Press or to adjust. < >

5 ress to exit.

Brightness

0-100

Backlight Adjustment

Contrast

0-100

Contrast from Digital-register.

Eco mode

Standard

Standard Mode

Text

Text Mode

Internet

Internet Mode

Game

Game Mode

Movie

Movie Mode

Sports

Sports Mode

Gamma

Gamma1

Adjust to Gamma1

Gamma2

Adjust to Gamma 2

Gamma3

Adjust to Gamma 3

DCR

Oﬀ

Disable dynamic contrast ratio

Enable dynamic contrast ratio

Overdrive

W eak

Adjust the response time

(only for E2260P /E2260SHU HU/

E2460P /E2460S /E2460S /E2460P /E226WHU WHU HU HU

0PQ ）

M edium

Strong

O ff

i-Care

adjusts the brightness according to light intensity

(only for E2260P /E2260SHU HU/

E2460PW /E2460SW /E2460S /E2460P HU HU HU HU）

Oﬀ

Image Setup

1 Press to display menu.

2 Press or to select (Image Setup), and press to enter. < >

3 Press or to select submenu, and press to enter. < >

4 Press or to adjust. < >

5 Press to exit.

Clock

0-100

Adjust picture Clock to reduce Vertical-Line noise.

Phase

0-100

Adjust Picture Phase to reduce Horizontal-Line noise

Sharpness

0- 100

Adjust picture sharpness

H.Position

0-100

Adjust the horizontal position of the picture.

V.Position

0-100

Adjust the vertical position of the picture.

Color Setup

1 Press (Menu) to display menu.

2 Press or to select (Color Setup), and press to enter. < >

3 Press or to select submenu, and press to enter. < >

4 Press or to adjust. < >

5 Press to exit.

Color setup.

Warm

Recall Warm Color Temperature from EEPROM.

Normal

Recall Normal Color Temperature from EEPROM.

Cool

Recall Cool Color Temperature from EEPROM.

sRGB

Recall SRGB Color Temperature from EEPROM.

User

Red

Red Gain from Digital-register

Green

Green Gain Digital-register.

Blue

Blue Gain from Digital-register

DCB Mode

Full Enhance

on or oﬀ

Disable or Enable Full Enhance Mode

Nature Skin

on or oﬀ

Disable or Enable Nature Skin Mode

Green Field

on or oﬀ

Disable or Enable Green Field Mode

Sky-blue

on or oﬀ

Disable or Enable Sky-blue Mode

AutoDetect

on or oﬀ

Disable or Enable AutoDetect Mode

DCB Demo

On or oﬀ

Disable or Enable Demo

Picture Boost

1 Press (Menu) to display menu.

2 Press or to select (Picture Boost), and press to enter. < >

3 Press or to select submenu, and press to enter. < >

4 Press or to adjust. < >

5 Press to exit.

Frame Size

14-100

Adjust Frame Size

Brightness

0-100

Adjust Frame Brightness

Contrast

0-100

Adjust Frame Contrast

H. position

0- 100

Adjust Frame horizontal Position

V.position

0- 100

Adjust Frame vertical Position

Bright Frame

on or oﬀ

Disable or Enable Bright Frame

OSD Setup

1 Press (Menu) to display menu.

2Press or to select (OSD Setup), and press to enter. < >

3 Press or to select submenu, and press to enter. < >

4 Press or to adjust. < >

5 Press to exit.

H.Position

0-100

Adjust the horizontal position of

OSD

V.Position

0-100

Adjust the vertical position of OSD

Timeout

5- 120

Adjust the OSD Timeout

Transparence

0- 100

Adjust the transparence of OSD

Language

Select the OSD language

Extra

1 Press (Menu) to display menu.

2 Press or to select (Extra), and press to enter. < >

3 Press or to select submenu, and press to enter. < >

4 Press or to adjust. < >

5 Press to exit.

Input Select

Auto / Analog / DVI / HDMI

Select input s nal source. E2260P /E2260Sig （

（

（（ HU HU/

E2460P /E2460S /E2460S /E2460PWHU WHU HU HU）

）

））

Input Select

Auto / Analog / DVI

Select input s n source. E2060S /E2060S ig al （

（

（（ WDN WDAN

/E960S /E960PRDA RDA/

E960S E2060S /E2060P /E2060SRD/ WDA WDA WD/

E2260S E2260S / E2260P E2060S D/DA DA/WDU）

Input Select

Analog

Select input s n source. E2060S /E2060S ig al （W WN）

Input Select

Auto / Analog / DVI / DP

Select input s n source. E2260PQig al （

（

（（）

）

））

Auto Conﬁg

yes or no

Auto adjust the picture to default.

Oﬀ timer

0-24hrs

Select DC oﬀ time.

Image Ratio

wide or 4:3

Select wide or 4:3 format for display.

DDC CI-

yes or no

Turn ON/OFF DDC-CI Support.

Reset

yes or no

Reset the menu to default.

Information

Show the information of the main image and sub-image

source.

Exit

1 Press (Menu) to display menu.

2 Press or to select (Exit), and press to enter. < >

3 Press to exit

Exit

Exit the main OSD

LED Indicator

Status

LED Color

Full Power Mode

Green or Blue

Active-oﬀ Mode

Orange or red

Driver

Monitor Driver

Windows 2000

1. Start Windows® 2000

2. Click on the 'Start' button, point to 'Settings', and then click on 'Control Panel'.

3. Double click on the 'Display' Icon.

4. Select the 'Settings' tab then click on 'Advanced...'.

5. Select 'Monitor'

- If the 'Properties' button is inactive, it means your monitor is properly conﬁgured. Please stop installation.

- If the 'Properties' button is active. Click on 'Properties' button. Please follow the steps given below.

6. Click on 'Driver' and then click on 'Update Driver...' then click on the 'Next' button.

7. Select 'Display a list of the known drivers for this device so that I can choose a speciﬁc driver', then click on 'Next'

and then click on 'Have disk...'.

8. Click on the 'Browse...' button then select the appropriate drive F: ( CD-ROM Drive).

9. Click on the 'Open' button, then click on the 'OK' button.

10. Select your monitor model and click on the 'Next' button .

11. Click on the 'Finish' button then the 'Close' button.

If you can see the 'Digital Signature Not Found' window, click on the 'Yes' button.

Windows ME

1. Start Windows® Me

2. Click on the 'Start' button, point to 'Settings', and then click on 'Control Panel'.

3. Double click on the 'Display' Icon.

4. Select the 'Settings' tab then click on 'Advanced...'.

5. Select the 'Monitor' button, then click on 'Change...' button.

6. Select 'Specify the location of the driver(Advanced)' and click on the 'Next' button.

7. Select 'Display a list of all the drivers in a speciﬁc location, so you can choose the driver you want', then click on

'Next' and then click on 'Have Disk...'.

8. Click on the 'Browse...' button, select the appropriate drive F: ( CD-ROM Drive) then click on the 'OK' button.

9. Click on the 'OK' button, select your monitor model and click on the 'Next' button.

10. Click on 'Finish' button then the 'Close' button.

Windows XP

1. Start Windows® XP

2. Click on the 'Start' button and then click on 'Control Panel'.

3. Select and click on the category ‘Appearance and Themes’

4. Click on the 'Display' Item.

8. Select the 'Install from a list or speciﬁc location [advanced]' radio button and then click on the 'Next' button.

9. Select the 'Don't Search. I will choose the driver to install' radio button. Then click on the 'Next' button.

10. Click on the 'Have disk...' button, then click on the 'Browse...' button and then select the appropriate drive F:

(CD-ROM Drive).

11. Click on the 'Open' button, then click the 'OK' button.

12. Select your monitor model and click on the 'Next' button.

- If you can see the 'has not passed Windows® Logo testing to verify its compatibility with Windows® XP' message,

please click on the 'Continue Anyway' button.

13. Click on the 'Finish' button then the 'Close' button.

14. Click on the 'OK' button and then the 'OK' button again to close the Display Properties dialog box.

Windows Vista

1. Click "Start " and "Control Panel". Then, double-click on "Appearance and Personalization".

2. Click "Personalization" and then "Display Settings".

3. Click "Advanced Settings...".

4. Click "Properties" in the "Monitor" tab. If the "Properties" button is deactivated, it means the conﬁguration for your

monitor is completed. The monitor can be used as is.

If the message "Windows needs..." is displayed, as shown in the ﬁgure below, click "Continue".

5. Click "Update Driver..." in the "Driver" tab.

6. Check the "Browse my computer for driver software" checkbox and click "Let me pick from a list of device drivers

on my computer".

7. Click on the 'Have disk...' button, then click on the 'Browse...' button and then select the appropriate drive

F:\Driver (CD-ROM Drive).

8. Select your monitor model and click on the 'Next' button.

9. Click "Close" "Close" "OK" "OK" on the following screens displayed in sequence. → → →

Windows 7

1.Start Windows® 7

2.Click on the button and then click on 'Start' 'Control Panel'.

3. Click on the icon. 'Display'

4.Ckick on the button. Change display settings “ ”

Click the “Advanced Settings” button.

Click the tab and then click the“Monitor” “Properties” button.

7.Click the tab. “Driver”

8. Open the "Update Driver Software-Generic PnP Monitor" window by clicking on and then “Update Driver... “

click the button. "Browse my computer for driver software"

9. Select "Let me pick from a list of device drivers on my computer".

10. Click the button. Click on the button and navigate to the following directory: “Have Disk” “Browse”

X:\Driver\module name (where X is the drive letter designator for the CD-ROM drive).

11. Select the ﬁle and click the button. Click the button. "xxx.inf" “Open” “OK”

12. Select your monitor model and click the button. The ﬁles will be copied from the CD to your hard disk “Next”

drive.

3. Close all open windows and remove the CD.

14. Restart the system. The system will automatically select the maximum refresh rate and corresponding Color

Matching Proﬁles.

Windows 8

1. Start Windows® 8

2. Right click and click at the bottom-right of the screen.All apps

3. Click on the icon“ ”Control panel

4. Set the “ iew by” “Large icons” “Small icons”V to or .

5. Click on the icon.“ ”Display

6. Click on the button.“Change display settings”

7. Click the button“Advanced Settings” .

8. Click the tab and then click the .“Monitor” “Properties” button

9. Click the tab. “Driver”

10. Open the window by clicking on “ ”Update Driver Software-Generic PnP Monitor “Update Driver... “ and

then click the "Browse my computer for driver software" button.

11. Select "Let me pick from a list of device drivers on my computer" .

12. Click the button. Click on the button and navigate to the following directory: “Have Disk” “Browse”

X:\Driver\module name (where X is the drive letter designator for the CD-ROM drive).

13. Select the ﬁle and click the button. Click the button. "xxx.inf" “Open” “OK”

14. Select your monitor model and click the button. The ﬁles will be copied from the CD to your hard disk “Next”

drive.

15. Close all open windows and remove the CD.

16. Restart the system. The system will automatically select the maximum refresh rate and corresponding Color

Matching Proﬁles.

i-Menu

Welcome to “i Menu” - software by AOC. i-Menu makes it easy to adjust your monitor display setting by using on

screen menus instead of the OSD button on the monitor. To complete installation, please follow the installation

guide.

e-Saver

Welcome to use AOC e-Saver monitor power management software! The AOC e-Saver features Smart Shutdown

functions for your monitors, allows your monitor to timely shutdown when PC unit is at any status (On, Oﬀ, Sleep or

Screen Saver); the actual shutdown time depends on your preferences (see example below).

Please click on "driver/e-Saver/setup.exe" to start installing the e-Saver software, follow the install wizard to

complete software installation.

Under each of the four PC status, you may choose from the pull-down menu the desired time (in minutes) for your

monitor to automatically shutdown. The example above illustrated:

1) The monitor will never shutdown when the PC is powered on.

2) The monitor will automatically shutdown 5 minutes after the PC is powered oﬀ.

3) The monitor will automatically shutdown 10 minutes after the PC is in sleep/stand-by mode.

4) The monitor will automatically shutdown 20 minutes after the screen saver appears.

You can click “RESET” to set the e-Saver to its default settings like below.

Screen+

Welcome to "Screen+" software by AOC, Screen+ software is a desktop screen splitting tool, it splits the desktop

into diﬀerent panes, each pane displays a diﬀerent window. You only need to drag the window to a corresponding

pane, when you want to access it. It supports multiple monitor display to make your task easier. Please follow the

installation software to install it.

Troubleshoot

Problem & Question

Possible Solutions

Power LED Is Not ON

Make sure the power button is ON and the Power Cord is properly connected

to a grounded power outlet and to the monitor.

No images on the screen

Is the power cord connected properly?

Check the power cord connection and power supply.

Is the cable connected correctly?

(Connected using the D-sub cable)

Check the DB-15 cable connection.

(Connected using the DVI cable)

Check the DVI cable connection.

* DVI input is not available on every model.

If the power is on, reboot the computer to see the initial screen (the login

screen), which can be seen.

If the initial screen (the login screen) appears, boot the computer in the

applicable mode (the safe mode for Windows ME/XP/2000) and then change

the frequency of the video card.

(Refer to the Setting the Optimal Resolution)

If the initial screen (the login screen) does not appear, contact the Service

Center or your dealer.

Can you see "Input Not Supported" on the screen?

You can see this message when the signal from the video card exceeds the

maximum resolution and frequency that the monitor can handle properly.

Adjust the maximum resolution and frequency that the monitor can handle

properly.

Make sure the AOC Monitor Drivers are installed.

Picture Is Fuzzy & Has

Ghosting Shadowing Problem

Adjust the Contrast and Brightness Controls.

Press to auto adjust.

Make sure you are not using an extension cable or switch box. We

recommend plugging the monitor directly to the video card output connector

on the back .

Picture Bounces, Flickers Or

Wave Pattern Appears In The

Picture

Move electrical devices that may cause electrical interference as far away

from the monitor as possible.

Use the maximum refresh rate your monitor is capable of at the resolution

your are using.

Monitor Is Stuck In Active

Oﬀ-Mode"

The Computer Power Switch should be in the ON position.

The Computer Video Card should be snugly fitted in its slot.

Make sure the monitor's video cable is properly connected to the computer.

Inspect the monitor's video cable and make sure no pin is bent.

Make sure your computer is operational by hitting the CAPS LOCK key on

the keyboard while observing the CAPS LOCK LED. The LED should either

turn ON or OFF after hitting the CAPS LOCK key.

Missing one of the primary

colors (RED, GREEN, or

BLUE)

Inspect the monitor's video cable and make sure that no pin is damaged.

Make sure the monitor's video cable is properly connected to the computer.

Screen image is not centered

or sized properly

Adjust H-Position and V-Position or press hot-key (AUTO).

Picture has color defects

(white does not look white)

Adjust RGB color or select desired color temperature.

Horizontal or vertical

disturbances on the screen

Use Windows 95/98/2000/ME/XP shut-down mode Adjust CLOCK and

FOCUS.

Press to auto-adjust.

Speciﬁcation

General Speciﬁcation

Panel

Model name

E960S / E960P E960S RDA RDA/ RD

Driving system

TFT Color LCD

Viewable Image Size

48.2cm diagonal

Pixel pitch

0.294mm(H)X0.294mm(V)

Video

R, G, B Analog lnterface & Digital Interface

Separate Sync.

H/V TTL

Display Color

16.7M Colors

Dot Clock

108MHz

Resolution

Horizontal scan range

30 kHz - kHz 83

Horizontal scan Size(Maximum)

376.32mm

Vertical scan range

50 Hz - 76 Hz

Vertical scan Size(Maximum)

301.056mm

Optimal preset resolution

1280x 1024 (60 Hz)

Plug & Play

VESA DDC2B/CI

Input Connector

D-Sub 15pin; DVI 24pin

Input Video Signal

Analog: 0.7Vp-p(standard), 75 OHM, TMDS

Power Source

100-240V~, 50/60Hz

Power Consumption

Active: W (typical) 18

Standby < 0.5 W

Oﬀ timer

0-24 hrs

Speakers(E960S / E960P ) RDA RDA

2WX2

Physical Characteristics

Connector Type

15-pin Mini D-Sub ; DVI-D

Signal Cable Type

Detachable

Environmental

Temperature:

Operating

0° to 40°

Non-Operating

-25° to 55°

Humidity:

Operating

10% to 85% (non-condensing)

Non-Operating

5% to 93% (non-condensing)

Panel

Model name

E2060SWN/E2060S /E2060S WDN WDAN

/E2060S / E2060P WDA WDA

/E2060S /E2060S /E2060S W WD WDU

Driving system

TFT Color LCD

Viewable Image Size

49.5cm diagonal

Pixel pitch

0.27mm(H)X0.27mm(V)

Video

(E2060S /E2060S E2060S WDU WDN/ WDAN

/E2060S / E2060P /E2060S WDA WDA WD)

R, G, B Analog lnterface & Digital Interface

Video (E2060S E2060S ) W WN

R, G, B Analog lnterface

Separate Sync.

H/V TTL

Display Color

16.7M Colors

Dot Clock

108MHz

Resolution

Horizontal scan range

30 kHz - 83 kHz

Horizontal scan Size(Maximum)

432mm

Vertical scan range

50 Hz - 76 Hz

Vertical scan Size(Maximum)

239.76mm

Optimal preset resolution

1600×900@60Hz

Plug & Play

VESA DDC2B/CI

Input Connector

(E2060S /E2060S E2060S WDU WDN/ WDAN

/E2060S / E2060P /E2060S WDA WDA WD)

D-Sub 15pin; DVI 24pin

Input Connector (E2060SW

E2060SWN)

D-Sub 15pin;

Input Video Signal

Analog: 0.7Vp-p(standard), 75 OHM, TMDS

Power Source

100-240V~, 50/60Hz

Power Consumption

Active: 23 W (typical)

35 W (typical) E2060S （WDU）

Standby < 0.5 W

Standby < 1 W E2060S （WDU）

Oﬀ timer

0-24 hrs

Speakers(E2060S /E2060SWDU WDA/

E2060P /E2060S ) WDA W NDA

2WX2

Physical Characteristics

Connector Type

(E2060S /E2060S E2060S WDU WDN/ WDAN

/E2060S / E2060P /E2060S WDA WDA WD)

15-pin Mini D-Sub DVI-D

Connector Type (E2060S W

/E2060SWN)

15-pin Mini D-Sub

Signal Cable Type

Detachable

Environmental

Temperature:

Operating

0° to 40°

Non-Operating

25°

Humidity:

Produkt Specifikationer

Mærke:	AOC
Kategori:	Skærm
Model:	E2260PQ/BK
Tænd-/slukkontakt:	Ja
Vekselstrømsindgangsspænding:	100 - 240 V
Vekselstrømsindgangsfrekvens:	50 - 60 Hz
Produktfarve:	Sort
Pakkevægt:	7220 g
Pakkedybde:	177 mm
Pakkebredde:	652 mm
Pakkehøjde:	413 mm
Skærm diagonal:	22 "
Skærmopløsning:	1680 x 1050 pixel
Berøringsskærm:	Ingen
HD-type:	WSXGA+
Skærmteknologi:	LED
Naturligt aspektforhold:	16:10
Responstid:	2 ms
Synsvinkel, horisontal:	170 °
Synsvinkel, vertikal:	160 °
Skærm form:	Flad
3D:	Ingen
Indbyggede højttaler(e):	Ja
Opbevaringstemperatur (T-T):	-25 - 55 °C
Relativ luftfugtighed ved drift (H-H):	10 - 85 %
Relativ luftfugtighed ved opbevaring (H-H):	5 - 93 %
Antal højttalere:	2
Udgangseffekt (RMS):	4 W
HDCP:	Ja
DVI-port:	Ja
Udgange til hovedtelefoner:	1
Skærmvisning (OSD):	Ja
Antal OSD sprog:	16
OSD-sprog:	CHI (SIMPL),CHI (TR),CZE,DEU,DUT,ENG,ESP,FIN,FRE,ITA,JPN,KOR,POL,POR,RUS,SWE
VESA montering:	Ja
Panel montering grænseflade:	100 x 100 mm
Strømforbrug (standby):	0.2 W
Strømforbrug (typisk):	17 W
Bredde (uden stativ):	507.8 mm
Dybde (uden stativ):	127 mm
Højde (uden stativ):	499.7 mm
Vægt (uden stativ):	- g
Bredde (med stativ):	507.8 mm
Dybde (med stativ):	127 mm
Højde (med stativ):	244.6 mm
Vægt (med stativ):	5650 g
Driftstemperatur (T-T):	0 - 40 °C
Markedspositionering:	Forretning
Strømforbrug (slukket):	0.12 W
Kabler inkluderet:	AC,Audio (3.5mm),DVI,DisplayPort,VGA
Pakketype:	Kasse
Understøttede grafikopløsninger:	1680 x 1050 (WSXGA+)
Certificering:	GOST
LED-indikatorer:	Strøm
Indbygget kamera:	Ingen
Bæredygtighedscertifikater:	RoHS,EPEAT Silver,ENERGY STAR
Paneltype:	TN
Slot til kabellås:	Ja
Billedformat:	16:10
Tilslutning af hovedtelefoner:	3,5 mm
Vis antal farver:	16,78 millioner farver
Farve:	Sort
Plug and play:	Ja
Type af baggrundslys:	W-LED
Maksimal opdateringshastighed:	60 Hz
Skærmens lysstyrke (typisk):	250 cd/m²
Kontrastforhold (typisk):	1000:1
Kontrastforhold (dynamisk):	50000000:1
Pixel pitch:	0.282 x 0.282 mm
Synlig størrelse, horisontal:	473.76 mm
Synlig størrelse, vertikal:	296.1 mm
Horisontal scanningsområde:	30 - 83 kHz
Ingen tungmetaller:	Hg (kviksølv)
Frontkantfarve:	Sort
DisplayPort-version:	1.1
Indbygget USB-hub:	Ingen
Antal DisplayPorts:	1
Udgang til hovedtelefoner:	Ja
Antal VGA-porte (D-sub):	1
AC (strøm) indgang:	Ja
Højdejustering:	Ja
Akse:	Ja
Drejelig:	Ja
Drejevinkel område:	-165 - 165 °
Vipbar:	Ja
Hældningsvinkelområde:	-5 - 23 °
Kabellåseslids type:	Kensington
Genanvendelige emballeringsmaterialer:	100 %
Stativ inkluderet:	Ja
DisplayPort kabellængde:	1.8 m
Ekstern strømadapter:	Ingen
TV-tuner, integreret:	Ingen
Gennemsnitstid mellem fejl (MTBF):	50000 t
Vertikalt scanningsområde:	50 - 76 Hz
Strømkabellængde:	1.8 m
Digital vertikal frekvens:	50 - 76 Hz
Skærmens lysstyrke (spidsbelastning):	250 cd/m²
Digital horisontal frekvens:	30 - 83 kHz
Hældningsindstilling:	Ja
Antal DVI-D-porte:	1
Pixel frekvens:	146 Mhz
Bezel tykkelse type:	Normal
VGA kabellængde:	1.8 m
Lyd kabellængde:	1.8 m
DVI kabellængde:	1.8 m