AOC E2429SWHE Manual
Læs nedenfor 📖 manual på dansk for AOC E2429SWHE (72 sider) i kategorien Skærm. Denne guide var nyttig for 23 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere
Side 1/72
2
Safety ........................................................................................................................................................................ 4
National Conventions ......................................................................................................................................... 4
Power 5................................................................................................................................................................
Installation .......................................................................................................................................................... 6
Cleaning 7.............................................................................................................................................................
Other .................................................................................................................................................................. 8
Setup 9........................................................................................................................................................................
Contents in Box ................................................................................................................................................. 9
Setup Stand & Base ......................................................................................................................................... 10
Adjusting Viewing Angle ................................................................................................................................... 11
Connecting the Monitor .................................................................................................................................... 12
Wall Mounting .................................................................................................................................................. 13
Adjusting ................................................................................................................................................................. 14
Setting Optimal Resolution .............................................................................................................................. 14
Windows 8 ................................................................................................................................................ 14
Windows 7 ................................................................................................................................................ 16
Windows Vista .......................................................................................................................................... 18
Windows XP ............................................................................................................................................. 21
Windows ME/2000 .................................................................................................................................... 22
Hotkeys ............................................................................................................................................................ 23
OSD Setting ..................................................................................................................................................... 25
Luminance ................................................................................................................................................ 26
Image Setup ............................................................................................................................................. 28
Color Setup ............................................................................................................................................... 30
Picture Boost ............................................................................................................................................ 32
OSD Setup ............................................................................................................................................... 34
Extra ......................................................................................................................................................... 36
Exit ............................................................................................................................................................38
LED Indicator ................................................................................................................................................... 39
Driver ...................................................................................................................................................................... 40
Monitor Driver .................................................................................................................................................. 40
Windows 8 ................................................................................................................................................ 40
Windows 7 ................................................................................................................................................ 44
Windows Vista .......................................................................................................................................... 48
Windows XP ............................................................................................................................................. 50
Windows 2000 .......................................................................................................................................... 53
Windows ME ............................................................................................................................................. 53
i-Menu .............................................................................................................................................................. 54
e-Saver ............................................................................................................................................................ 55
Screen+ ........................................................................................................................................................... 56
Troubleshoot ........................................................................................................................................................... 57
Specification ............................................................................................................................................................ 58
General Specification ....................................................................................................................................... 58
Preset Display Modes ...................................................................................................................................... 59
Pin Assignments .............................................................................................................................................. 60
Plug and Play ................................................................................................................................................... 61
3
Regulation ............................................................................................................................................................... 62
FCC Notice ...................................................................................................................................................... 62
WEEE Declaration ........................................................................................................................................... 63
WEEE Declaration for India ............................................................................................................................. 63
RoHS Declaration for India .............................................................................................................................. 63
Energy Star ...................................................................................................................................................... 64
Service .................................................................................................................................................................... 65
Warranty Statement for Europe ........................................................................................................................65
Warranty Statement for Middle East and Africa (MEA) ....................................................................................67
AOC PIXEL POLICY ........................................................................................................................................ 69
ISO 9241-307 CLASS 1 ................................................................................................................................... 69
Warranty Statement for North & South America (excluding Brazil) ..................................................................70
EASE PROGRAME ......................................................................................................................................... 72
4
Safety
National Conventions
The following subsections describe notational conventions used in this document.
Notes, Cautions, and Warnings
Throughout this guide, blocks of text may be accompanied by an icon and printed in bold type or in italic type.
These blocks are notes, cautions, and warnings, and they are used as follows:
NOTE: A NOTE indicates important information that helps you make better use of your
computer system.
CAUTION: A CAUTION indicates either potential damage to hardware or loss of data
and tells you how to avoid the problem.
WARNING: A WARNING indicates the potential for bodily harm and tells you how to
avoid the problem. Some warnings may appear in alternate formats and may be
unaccompanied by an icon. In such cases, the specific presentation of the warning is
mandated by regulatory authority.
5
Power
The monitor should be operated only from the type of power source indicated on the label. If you are not sure
of the type of power supplied to your home, consult your dealer or local power company.
The monitor is equipped with a three-pronged grounded plug, a plug with a third (grounding) pin. This plug
will fit only into a grounded power outlet as a safety feature. If your outlet does not accommodate the three-wire
plug, have an electrician install the correct outlet, or use an adapter to ground the appliance safely. Do not defeat
the safety purpose of the grounded plug.
Unplug the unit during a lightning storm or when it will not be used for long periods of time. This will protect
the monitor from damage due to power surges.
Do not overload power strips and extension cords. Overloading can result in fire or electric shock.
The wall socket shall be installed near the equipment and shall be easily accessible.
6
Installation
Do not place the monitor on an unstable cart, stand, tripod, bracket, or table. If the monitor falls, it can injure a
person and cause serious damage to this product. Use only a cart, stand, tripod, bracket, or table recommended by
the manufacturer or sold with this product. Follow the manufacturer’s instructions when installing the product and
use mounting accessories recommended by the manufacturer. A product and cart combination should be moved
with care.
Never push any object into the slot on the monitor cabinet. It could damage circuit parts causing a fire or
electric shock. Never spill liquids on the monitor.
Do not place the front of the product on the floor.
If you mount the monitor on a wall or shelf, use a mounting kit approved by the manufacturer and follow the kit
instructions.
Leave some space around the monitor as shown below. Otherwise, air-circulation may be inadequate hence
overheating may cause a fire or damage to the monitor.
See below the recommended ventilation areas around the monitor when the monitor is installed on the wall or on
the stand:
7
Cleaning
Clean the cabinet regularly with cloth. You can use soft-detergent to wipe out the stain, instead of
strong-detergent which will cauterize the product cabinet.
When cleaning, make sure no detergent is leaked into the product. The cleaning cloth should not be too rough
as it will scratch the screen surface.
Please disconnect the power cord before cleaning the product.
8
Other
If the product is emitting a strange smell, sound or smoke, disconnect the power plug IMMEDIATELY and
contact a Service Center.
Make sure that the ventilating openings are not blocked by a table or curtain.
Do not engage the LCD monitor in severe vibration or high impact conditions during operation.
Do not knock or drop the monitor during operation or transportation.
For display with glossy bezel the user should consider the placement of the display as the bezel may cause
disturbing reflections from surrounding light and bright surfaces.
9
Setup
Contents in Box
Monitor
CD Manual
Power Cable
Base
Analog Cable
HDMI Cable
Not all signal cables (Analog and HDMI cables) will be provided for all countries and regions. Please check with
the local dealer or AOC branch office for confirmation.
10
Setup Stand & Base
Please setup or remove the base following the steps as below.
Setup:
Remove:
11
Adjusting Viewing Angle
For optimal viewing it is recommended to look at the full face of the monitor, then adjust the monitor's angle to your
own preference.
Hold the stand so you will not topple the monitor when you change the monitor's angle.
You are able to adjust the monitor's angle from -3° to °. 18
NOTE: not adjust the viewing angle over degrees in order to avoid damage. Do 18
NOTE:
Do not touch the LCD screen when you change the angle. It may cause damage or break the LCD screen.
Do not put your hand close to the gap between the monitor and the base to avoid the injury when adjusting the
viewing angle.
12
Connecting the Monitor
Cable Connections In Back of Monitor and Computer:
1. Power
2. Analog (D-Sub 15-Pin VGA cable)
3. HDMI
4. Earphone
To protect equipment, always turn off the PC and LCD monitor before connecting.
1 Connect the power cable to the AC port on the back of the monitor.
2 Connect one end of the 15-pin D-Sub cable to the back of the monitor and connect the other end to the
computer's D-Sub port.
3 Optional (Requires a video card with HDMI port) - Connect one end of the HDMI cable to the back of the –
monitor and connect the other end to the computer’s HDMI port.
4 Turn on your monitor and computer.
If your monitor displays an image, installation is complete. If it does not display an image, please refer
Troubleshooting.
13
Wall Mounting
Preparing to Install An Optional Wall Mounting Arm.
This monitor can be attached to a wall mounting arm you purchase separately. Disconnect power before this
procedure. Follow these steps:
1 Remove the base.
2 Follow the manufacturer's instructions to assemble the wall mounting arm.
3 Place the wall mounting arm onto the back of the monitor. Line up the holes of the arm with the holes in the
back of the monitor.
4 Insert the 4 screws into the holes and tighten.
5 Reconnect the cables. Refer to the user's manual that came with the optional wall mounting arm for
instructions on attaching it to the wall.
Noted : VESA mounting screw holes are not available for all models, please check with the dealer or official
department of AOC.
14
Adjusting
Setting Optimal Resolution
Windows 8
For Windows 8:
1. Right click and click at the bottom-right of the screen. All apps
2. Set the “ ” to “View by Category”.
3. Click Appearance and Personalization.
15
4. Click DISPLAY.
5. Set the resolution to Optimal preset resolution SLIDE-BAR
16
Windows 7
For Windows 7:
1. Click START.
2. Click CONTROL PANEL.
3. Click Appearance.
4. Click DISPLAY.
17
5. Set the resolution to Optimal preset resolution SLIDE-BAR
18
Windows Vista
For Windows Vista:
1. Click START.
2. Click CONTROL PANEL.
3. Click Appearance and Personalization.
19
4. Click Personalization
5. Click Display Settings.
20
6. Set the resolution to Optimal preset resolution SLIDE-BAR
21
Windows XP
For Windows XP:
1 Click START.
2 Click SETTINGS.
3 Click CONTROL PANEL.
4 Click Appearance and Themes.
22
5 Double click DISPLAY.
6 Click SETTINGS.
7 Set the resolution to Optimal preset resolution SLIDE-BAR
Windows ME/2000
For Windows ME/2000:
1 Click START.
2 Click SETTINGS.
3 Click CONTROL PANEL.
4 Double click DISPLAY.
5 Click SETTINGS.
6 Set the resolution to Optimal preset resolution SLIDE-BAR
23
Hotkeys
1
Source/Auto/Exit
2
Clear vision /
3
4:3 or wide/ Volume /
4
Menu/Enter
5
Power
Power
Press the Power button to turn on/off the monitor.
Menu/Enter
Press to display the OSD or confirm the selection.
4:3 or wide image ratio /
When there is no OSD, press hotkey continuously to change 4:3 or wide image ratio. (If the product screen size is
4:3 or input signal resolution is wide format, the hot key is disable to adjust. ). (VGA)
Volume /
When there is no OSD, press Volume adjust volume. (HDMI)
Source /Auto / Exit
When the OSD is closed, press Auto/Source/Exit button continuously about 2 second to do auto configure (only for
the models with dual or more inputs). When the OSD is closed, press Auto/Source/Exit button will be Source hot
key function (Only for the models with dual or more inputs).
24
Clear Vision
1. When ther Clear Vision. e is no OSD, Press the “ ” button to activate
2. buttons to select between weak, medium, strong, or off settings. Default setting is always Use the “ ” or “ ”
“off”.
3. Press and hold button for 5 seconds to activate the Clear Vision Demo, Clear Vision “” and a message of “
Demo: on” will be display on the screen for a duration of 5 seconds. Press Menu or Exit button, the message
will disappear. Press and hold button for 5 seconds again, Clear Vision Demo will be off. “ ”
Clear Vision function provides the best image viewing experience by converting low resolution and blurry images
into clear and vivid images.
Clear Vision
Off
Adjust the Clear Vision
Weak
Medium
Strong
Clear Vision Demo
on or off
Disable or Enable Demo
25
OSD Setti ng
Basic and simple instruction on the control keys.
1) Press the to activate the OSD window. MENU-button
2) Press to navigate through the functions. Once the desired function is highlighted, press the or
MENU-button to activate it . press or to navigate through the sub-menu functions. Once the desired
function is highlighted, press to activate it. MENU-button
3) Press or to change the settings of the selected function. Press to exit. If you want to adjust any AUTO
other function, repeat steps 2-3.
4) OSD Lock Function: To lock the OSD, press and hold the while the monitor is off and then press MENU button
button to turn the monitor on. To un-lock the OSD - press and hold the while the monitor is MENU button
off and then press to turn the monitor on. button
Notes:
1) If the product has only one signal input, the item of "Input Select" is disable to adjust.
2) If the product screen size is 4:3 or input signal resolution is wide format, the item of "Image Ratio" is disable to
adjust.
3) One of Clear vision, DCR, Color Boost, and Picture Boost functions is activated; the other three functions are
turned off accordingly.
26
Luminance
1. Press (Menu) to display menu. MENU
2. Press or to select (Luminance), and press to enter. MENU
3. Press or to select submenu, and press to enter. MENU
27
4. Press or to adjust.
5. Press to exit AUTO .
Brightness
0-100
Backlight Adjustment
Contrast
0-100
Contrast from Digital-register.
Eco mode
Standard
Standard Mode
Text
Text Mode
Internet
Internet Mode
Game
Game Mode
Movie
Movie Mode
Sports
Sports Mode
Gamma
Gamma1
Adjust to Gamma1
Gamma2
Adjust to Gamma 2
Gamma3
Adjust to Gamma 3
DCR
Off
Disable dynamic contrast ratio
On
Enable dynamic contrast ratio
28
Image Setup
1. Press (Menu) to display menu. MENU
2. Press or to select (Image Setup), and press to enter. MENU
3. Press or to select submenu, and press to enter. MENU
29
4. Press or to adjust.
5. Press to exit AUTO .
Clock
0-100
Adjust picture Clock to reduce Vertical-Line noise.
Phase
0-100
Adjust Picture Phase to reduce Horizontal-Line noise
Sharpness
0- 100
Adjust picture sharpness
H.Position
0-100
Adjust the horizontal position of the picture.
V.Position
0-100
Adjust the vertical position of the picture.
Produkt Specifikationer
| Mærke: | AOC |
| Kategori: | Skærm |
| Model: | E2429SWHE |
Har du brug for hjælp?
Hvis du har brug for hjælp til AOC E2429SWHE stil et spørgsmål nedenfor, og andre brugere vil svare dig
Skærm AOC Manualer
20 Januar 2025
9 December 2024
9 December 2024
6 November 2024
6 November 2024
8 Oktober 2024
8 Oktober 2024
2 September 2024
23 August 2024
20 August 2024
Skærm Manualer
- Skærm Bosch
- Skærm Acer
- Skærm Denver
- Skærm Sony
- Skærm Canon
- Skærm Samsung
- Skærm Panasonic
- Skærm Philips
- Skærm Vitek
- Skærm IFM
- Skærm LG
- Skærm Mitsubishi
- Skærm Apple
- Skærm Sharp
- Skærm Behringer
- Skærm Emos
- Skærm Kenwood
- Skærm Epson
- Skærm Neumann
- Skærm Daewoo
- Skærm Smart
- Skærm HP
- Skærm Waeco
- Skærm Garmin
- Skærm Sanyo
- Skærm Asus
- Skærm Gigabyte
- Skærm Toshiba
- Skærm Pyle
- Skærm InFocus
- Skærm Lenovo
- Skærm Asrock
- Skærm Olympus
- Skærm Abus
- Skærm Optoma
- Skærm Westinghouse
- Skærm Element
- Skærm Thomson
- Skærm Hyundai
- Skærm Yorkville
- Skærm Burg Wächter
- Skærm JBL
- Skærm Black Box
- Skærm Hisense
- Skærm DataVideo
- Skærm RCF
- Skærm Maxell
- Skærm Hannspree
- Skærm Omron
- Skærm JVC
- Skærm Honeywell
- Skærm Hitachi
- Skærm Razer
- Skærm Medion
- Skærm Haier
- Skærm Cisco
- Skærm Huawei
- Skærm König
- Skærm ProXtend
- Skærm Alpine
- Skærm 3M
- Skærm Festo
- Skærm Danfoss
- Skærm Tripp Lite
- Skærm BenQ
- Skærm Jensen
- Skærm Xiaomi
- Skærm Viewsonic
- Skærm Dell
- Skærm Schneider
- Skærm ELO
- Skærm Vivitek
- Skærm Fujitsu
- Skærm Cooler Master
- Skærm PreSonus
- Skærm Tesla
- Skærm MSI
- Skærm NEC
- Skærm Stairville
- Skærm CTOUCH
- Skærm ESI
- Skærm Ikan
- Skærm Velleman
- Skærm Marshall
- Skærm Blue Sky
- Skærm JUNG
- Skærm Fostex
- Skærm Focal
- Skærm Genelec
- Skærm Ring
- Skærm KRK
- Skærm NZXT
- Skærm Thermaltake
- Skærm ART
- Skærm Newline
- Skærm Hikvision
- Skærm Archos
- Skærm Monacor
- Skærm Samson
- Skærm Yealink
- Skærm Xerox
- Skærm Midas
- Skærm Marshall Electronics
- Skærm I3-Technologies
- Skærm IK Multimedia
- Skærm Orion
- Skærm Kramer
- Skærm ElectriQ
- Skærm Onyx
- Skærm VIZIO
- Skærm ITek
- Skærm Hercules
- Skærm Prowise
- Skærm Bauhn
- Skærm Christie
- Skærm V7
- Skærm Vorago
- Skærm AVUE
- Skærm Genee World
- Skærm Faytech
- Skærm Avantone Pro
- Skærm Voxicon
- Skærm Vimar
- Skærm Continental Edison
- Skærm Dynaudio
- Skærm Iiyama
- Skærm Dahua Technology
- Skærm AG Neovo
- Skærm Joy-It
- Skærm SPL
- Skærm Kogan
- Skærm Barco
- Skærm Fujitsu Siemens
- Skærm LC-Power
- Skærm Postium
- Skærm Neat
- Skærm Planar
- Skærm QOMO
- Skærm Mobile Pixels
- Skærm Ernitec
- Skærm RGBlink
- Skærm Alienware
- Skærm Eizo
- Skærm HoverCam
- Skærm Soundstream
- Skærm Advantech
- Skærm Triton
- Skærm Extron
- Skærm Legamaster
- Skærm Ikegami
- Skærm Pelco
- Skærm Approx
- Skærm Yeyian
- Skærm GVision
- Skærm Posiflex
- Skærm Antelope Audio
- Skærm Mach Power
- Skærm AOpen
- Skærm HELGI
- Skærm Desview
- Skærm Alogic
- Skærm ProDVX
- Skærm SWIT
- Skærm Feelworld
- Skærm Wisenet
- Skærm KeepOut
- Skærm Elvid
- Skærm Wohler
- Skærm SmallHD
- Skærm Titan Army
- Skærm BookIT
- Skærm Delvcam
- Skærm Dough
- Skærm Xenarc
- Skærm Japannext
- Skærm Flanders Scientific
- Skærm TRIUMPH BOARD
- Skærm ViewZ
Nyeste Skærm Manualer
9 April 2025
9 April 2025
9 April 2025
6 April 2025
3 April 2025
30 Marts 2025
30 Marts 2025
29 Marts 2025
26 Marts 2025
25 Marts 2025