APC RBC23 Manual

APC Accu RBC23

Læs nedenfor 📖 manual på dansk for APC RBC23 (1 sider) i kategorien Accu. Denne guide var nyttig for 3 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/1
SURM2U Replacement Battery Cartridge installation Guide
This UPS has an easy to replace hot-swappable battery tray. Battery replacement is a safe
procedure, isolated from electrical hazards. You may leave the UPS and the protected equipment
on r t ll ng proced e. See r dealer or fo he fo owi ur you www.apcc.com for more information.
Smart-UPS Model Replacement Battery Cartridge
SU700 M2UR RB 22C
SU1000RM2U RBC23
SU1400RM2U RBC24
Plea e s read b o e p c g e t e y yef r re la in th ba t r tra :
Once t e b t ery is conn c ed, e c nne eq p ent is pr e f om powerh a t dis e t th o cted ui m not ot cted r o tages.u
Battery Replacement Procedure
1. The battery tray is accessible from the front of the UPS.
2. Be careful removing the battery tray – it is heavy.
3. This procedure requires a Phillips head screwdriver.
4. Small sparks at the battery connectors are normal during re-connection.
SU1400 M 2UR J J RB 24C
1. Face the front of the UPS and, using both hands, insert each
index finger behind the lip of the curved section of the front
pa el bezel a d p ll t ards . e o t pa l bezel ln n u ow you Th fr n ne wil
u sn .n ap
2. Set t e bezel a ide.h s
3. Take out the white cord, which is tucked into the space above
the battery connector . Grasp the cord and pull firmly
towards you to disconnect the battery.
4. Use a Phillips head screwdriver to remove the four (4)
screws that secure the battery tray. Set the screws aside.
5. Use the battery tray handle to slide the tray out halfway.
Then hold the tray from the sides and slide it out to the
maximum extended position. A stop tab on the bottom of
t e tr y ll e e t e tr y m c g t c lete .h a wi pr v n th a fro omin ou omp ly
6. Caref l y l t t e tr y p so at t st p tabu l if h a u th he o clears t e h
ledge on the unit.
7. Return the battery tray to APC using the package in which
you nr rep acl eme t r y s pped . t a hi
Th ue attery re ac t it clb pl e em n k in des a new battery tray.
8. Hold the new tray on the sides and align it with the opening.
9. Raise the back of the tray up slightly to position the stop tab
on the inside of the opening. Then level the tray and push it
in completely.
10. Remove the tape on the new battery tray connector to expose
the cable connector.
11. Locate the UPS battery connector which is to the right of
the battery tray and recessed. Connect the battery cable
connector to the UPS connector. Press firmly to ensure that
the connection is tight. You will hear a “snapwhen the
connector is properly seated.
12. Replace the four (4) screws removed in step 4.
13. Tuck the white battery cable cord neatly into the space above
the UPS connector.
14. Hold the front panel bezel with the cutout section on the
right. Align the tabs on the side of the bezel with the slots on
the front of the UPS and firmly snap it into place.
990-#### Rev.01 11/01


Produkt Specifikationer

Mærke: APC
Kategori: Accu
Model: RBC23

Har du brug for hjælp?

Hvis du har brug for hjælp til APC RBC23 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Accu APC Manualer

APC

APC RBC108 Manual

12 August 2024
APC

APC RBC142 Manual

7 August 2024
APC

APC SRC96XLBP Manual

6 August 2024
APC

APC RBC32 Manual

29 Juli 2024
APC

APC RBC7 Manual

29 Juli 2024
APC

APC RBC48 Manual

25 Juli 2024
APC

APC SMX48RMBP2U Manual

21 Juli 2024
APC

APC RBC5 Manual

20 Juli 2024
APC

APC RBC23 Manual

18 Juli 2024

Accu Manualer

Nyeste Accu Manualer