APC S10196162 Manual

APC Server S10196162

Læs nedenfor 📖 manual på dansk for APC S10196162 (1 sider) i kategorien Server. Denne guide var nyttig for 30 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/1
Version: UPS 03.5
Applicable SKUs:
================
ID 1015 and 1018, All standard SKUs beginning with SMT and SMC prefixes.
SMT: SMT750C, SMT750RM2UC, SMT1000C, SMT1000RM2UC, SMT1500C, SMT1500RM2UC,
SMT2200C, SMT2200RM2UC, STM3000C, SMT3000RM2UC
SMC: SMC1000C, SMC1000RM2UC, SMC1500C, SMC1500RM2UC, SMC1000IC, SMC1000I-2UC,
SMC1500I, SMC1500I- 2UC
Change logs:
1. Implement DOE function to improve power efficiency.
2. . Improved SmartConnect cloud connectivity and ability to reconnect to the cloud over time
3. Reporting UPS events (for example: battery disconnected, output on, etc.) more accurately to
SmartConnect cloud server.
Previous Released Version: UPS 03.2
Applicable SKUs:
================
ID 1015 and 1018, All standard skus beginning with SMT and SMC prefixes.
SMT: SMT750C, SMT750RM2UC, SMT1000C, SMT1000RM2UC, SMT1500C, SMT1500RM2UC,
SMT2200C, SMT2200RM2UC, STM3000C, SMT3000RM2UC
SMC: SMC1000C, SMC1000RM2UC, SMC1500C, SMC1500RM2UC
Change logs:
1. Enable boost charger function.
2. Improve the battery over-temperature-protection function. The UPS will pop-
up message on
LCD for user to recognize.
3. - Added an OEM feature auto turn on when AC is within range.
4. Allow configuration and acknowledgement of Site Wiring Fault.
5. Added an event reporting to could when Outlet status changes.
6. Fixed reversed setting in Modbus configuration.
7. Improved a status reporting to cloud related with pending off for UPS.
8. LCD Display of runtime remaining when runtime less than one minute will report “< 1m”
9. Change default choice for confirming installation of firmware now (output on) to CONFIRMED,
not CANCEL.
Initial Released Version: UPS 02.6
Applicable SKUs:
================
SMT: SMT750C, SMT750RM2UC
Compatibility:
==============
AP9613 Dry Contact Version Next Gen Relay IO card 2.1
AP9620 LCC Version 3.0
AP9624 (Second Gen Interface Expander Card) v1.0X
AP9631/AP9630 card APP SUMX 6.2.1, AOS 6.2.1
AP9635 CH / AP9631card APP SUMX 6.4.6, AOS 6.4.6


Produkt Specifikationer

Mærke: APC
Kategori: Server
Model: S10196162

Har du brug for hjælp?

Hvis du har brug for hjælp til APC S10196162 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Server APC Manualer

APC

APC SUM3000RMXLI2U Manual

26 September 2024
APC

APC BK650EI Manual

18 September 2024
APC

APC PNET1GB Manual

11 August 2024
APC

APC BK500EI Manual

7 August 2024
APC

APC APBE550G-UK Manual

31 Juli 2024
APC

APC APBK500EI Manual

30 Juli 2024
APC

APC APBR550GI Manual

28 Juli 2024
APC

APC S10196167 Manual

27 Juli 2024

Server Manualer

Nyeste Server Manualer