Aritech ATS626 Manual


Læs nedenfor 📖 manual på dansk for Aritech ATS626 (10 sider) i kategorien Sikkerhed. Denne guide var nyttig for 24 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/10
GE
Securit
y
ATS626 16-Output Expander
Installation Sheet
EN DA DE ES FI FR IT NL NO PL PT SV
1
Rx
Tx
IP
USB
MI
IP
CON23
CON19
CON12
LK2
CON13
USB
T1
T2
LK3
S3 S4 S5
+
+
S1 C
+
S2 CTC
+
+
-- 1 C23C4 5C67C8
~~+-
AC BATT LC-OUTPUTS HC-OUTPUTS SIR TMP
A
UX POWER INPUTS
Ax/R1
B/TA/R
EARTH
CTD-
D+
0V
+12V
COMMS
TAMPER
PSTN
110
EN: Installation instructions
Mounting the unit
The ATS626 unit must be fitted to the main control panel using
provided self-locking pillars.
Connections
CON1: Connection to the plug-in connector provided by the ATS
control panel, for example, ATS1000A.
CON3: This connection provides seven 50 mA open collector
outputs (number 1 to 7), and one high current 1 A open collector
output (number 8) with internal pull up. These outputs are
presented on a screw terminal together with +12 VDC and 0 V
(GND) terminals.
Typically, the high current output can be used as an extra siren
output or a similar output device with a temporarily power
requirement.
Note: Please include the current drawn from the ATS626 high
current output when calculating battery backup capacity for the
whole system.
This terminal can also be used to connect ATS1810.
CON5: Eight 50 mA open collector outputs (number 9 to 16).
CON6: Not used.
Table 1: Output wiring — on direct open collector outputs
No. CON3 CON5
1. +12 Volts +12 Volts
2. Output 1 Output 9
3. Output 2 Output 10
4. Output 3 Output 11
© 2009 GE Security, Inc.
1 of 10
P/N 1068835 • REV 1.0 • ISS 31JUL09


Produkt Specifikationer

Mærke: Aritech
Kategori: Sikkerhed
Model: ATS626

Har du brug for hjælp?

Hvis du har brug for hjælp til Aritech ATS626 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Sikkerhed Aritech Manualer

Sikkerhed Manualer

Nyeste Sikkerhed Manualer