Armodd Roundz 5 Manual

Armodd Smartwatch Roundz 5

Læs gratis den danske manual til Armodd Roundz 5 (5 sider) i kategorien Smartwatch. Denne vejledning er vurderet som hjælpsom af 35 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 18 anmeldelser. Har du et spørgsmål om Armodd Roundz 5, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/5

Thank you for purchasing our product.

Please read these instructions before use. The manufacturer is not liable for any damage

caused by improper use.

Charging and Switching On

1. The smartwatch must be fully charged before rst use. Always use the original charging

cable supplied with the smartwatch. Always charge for no more than 2 hours and do not

move the smartwatch while it is being charged.

2. Connect the charging cable to the USB port of your notebook (it must be plugged in) or

conventional mobile phone adapters (5 V) and attach the magnetic connectors at the

opposite end of the cable to the charging contacts. While charging, the magnetic

connectors of the charging cable must not come into contact with the strap or metal

components. It could result in the charger short-circuiting or strap being damaged.

Therefore, always charge the watch only with the strap detached.

3. If the display does not activate on its own, gently press the side button (1) for at least 3

seconds.

Pairing the watch with a mobile phone

For setting the smartwatch, the current time and date and their proper operation, the smartwatch

must be paired with a mobile phone via the recommended GloryFit app. Do not pair the

smartwatch to your mobile phone just via your phone’s Bluetooth; always use the app! You can

download the app using the QR code in the watch or nd it in Google Play or the App Store.

1. During installation, we recommend that you allow all authorisations that you are requested,

including running the app in the background.

2. Depending on your mobile phone model, we also recommend checking setting

authorisations in the app management in your phone, especially location tracking.

3. Before pairing, activate Bluetooth (make sure it is visible for all devices for an unlimited

time) and GPS in your phone. Do not pair the smartwatch using the Bluetooth menu of the

phone!

4. Open the GloryFit. It is recommended that you create an account.

5. The smartwatch should be as close as possible to the phone during pairing.

6. Tap on the “Device” icon in the app (bottom ) and then on “Select device”.

7. Tap on your device in the scanned devices shown. Conrm the pairing request on both the

watch and the phone.

8. Once the devices have been paired, set the required smartwatch functions in the app.

9. To allow more precise measurements, it is recommended that you ll in your personal

prole in the app.

Language settings

Tap on the in the app and then on the and select the desired language. Settings Languages

Smartwatch controls

Button (1)

- Press and hold to turn the smartwatch on/o.

- Press briey to activate the display or return to the menu.

- Carefully turn the button and choose among watch faces or browse functions.

Press the button gently so as to not damage it.

Touchscreen (2)

Swipe from left to right to show a list of functions.

Swipe from right to left to show basic stats and selected functions.

Swipe from top to bottom to show “Quick settings”.

Swipe from bottom to top to display the messages page .

Swipe from bottom to top then from top to bottom to switch between functions.

A short tap activates the function of your choice.

Display activation by twisting the wrist

Allow and set it up the app in your phone. in

Change the watch face

You may change it using several methods, both in the smartwatch and using the app.

a) By turning the button 1,

b) Holding your nger on the display shows an overview of watch faces to select from by swiping

from right to left, Tapping on the watch face of your choice to select it.

c) Change watch face In “Settings” –

d) Other watch faces can be added directly from the app. In the app, tap on the “Watch faces”

and select from the gallery the desired watch face to be transferred to the smartwatch.

(Loading all watch faces in the app may take several minutes due to the large amount of data

and depending on the phone model.)

Customise the watch face

For a successful setting of the watch face, the smartwatch and phone need to be suciently

charged.

In the application, tap on the Watch faces Own watchface, then on any watch face in the gallery –

marked with line in the upper right corner (usually watch faces in the rst row). Tap again on the

watch face and select whether to take a photo or select an image from your phone. Edit the image

in the viewport. To transfer the image to the smartwatch, tap on “Start update”. In the event of an

error message during the upload, please check whether the size of the image is suitable and whether

the phone and smartwatch are charged suciently. Then repeat the process.

Calling

1. Make sure the watch is paired with the app on your phone and that you have Bluetooth

turned on on your phone.

2. In the watch menu, click on the Phone icon, then click on the Bluetooth Switch to turn it on.

3. In the Bluetooth available devices on your phone, click on your watch (ARMODD Ro5) and

set the desired functions. (The procedure may vary depending on the phone model).

If the function is permitted and the smartwatch is paired with your phone, you may make and

answer calls both on the smartwatch and your phone.

You can save your contacts on the smartwatch via the app.

Messages

To receive messages and notications, your smartwatch must be paired with your phone, and the

receipt of messages and notications must be allowed in the . Furthermore, you must allow the app

app access to messages and notications in the settings of your phone. (This is typically done

during installation.)

Produkt Specifikationer

Mærke:	Armodd
Kategori:	Smartwatch
Model:	Roundz 5

Har du brug for hjælp?

Hvis du har brug for hjælp til Armodd Roundz 5 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Smartwatch Armodd Manualer

Armodd Silentwatch 5 Pro Manual

8 September 2025

Armodd Roundz 4 Manual

2 Marts 2025

Armodd Silentwatch 7 Pro GPS Manual

2 Januar 2025

Armodd Candywatch Crystal 3 Manual

1 September 2024

Armodd Roundz 5 Manual

1 September 2024

Armodd Prime Manual

1 September 2024

Armodd Squarz 12 Ultimate Manual

1 September 2024

Armodd Squarz 9 Pro Manual

22 August 2024

Armodd Squarz 11 Pro Manual

22 August 2024

Armodd Silentwatch 4 Pro Manual

22 August 2024

Smartwatch Manualer

Nyeste Smartwatch Manualer

Kiano Watch Sport Manual

9 September 2025

XD Enjoy XDTOM103SL Manual

5 September 2025

Krontaler GT-W-TB-2 Manual

2 September 2025

Media-Tech FUSION MT872 Manual

1 September 2025

Niceboy WATCH Lite 4 Manual

31 August 2025

Denver SWC-392 Manual

31 August 2025

Withings ScanWatch Nova Manual

31 August 2025

Kogan KAAP3PWTNVA Manual

30 August 2025

Kogan KAAP3WTCBLA Manual

30 August 2025

Kogan KALXBNDPNKA Manual

29 August 2025