Asrock Z490 Phantom Gaming 4SR Manual

Asrock Bundkort Z490 Phantom Gaming 4SR

Læs nedenfor 📖 manual på dansk for Asrock Z490 Phantom Gaming 4SR (10 sider) i kategorien Bundkort. Denne guide var nyttig for 4 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/10
1
Configuring a RAID array Using UEFI Setup Utility
The BIOS in this guide are for reference only and may differ from the exact settings screenshots
for your motherboard. The actual setup options you will see shall depend on the motherboard
you purchase. Please refer to the product specification page of the model you are using for
information on RAID support . Because the motherboard specifications and the BIOS software
might be updated, the content of this documentation will be subject to change without notice.
Caution:
Please use identical PCIE SSDs that are of the same type and capacity. RAID including a PCIe
SSD in a is only available with an Intel® SSD in that slot.Hyper M.2 slot
STEP 1:
Enter the UEFI Setup Utility by pressing <F2> or <Del> right after you power on the computer.
STEP 2:
Go to Boot\CSM and set CSM to [Disabled].
STEP 3:
Go to Advanced Storage Configuration and set SATA Mode Selection to [RAID Mode], then
press <F10> to save the configuration changes and exit setup.


Produkt Specifikationer

Mærke: Asrock
Kategori: Bundkort
Model: Z490 Phantom Gaming 4SR

Har du brug for hjælp?

Hvis du har brug for hjælp til Asrock Z490 Phantom Gaming 4SR stil et spørgsmål nedenfor, og andre brugere vil svare dig