ATP 9060E Manual


Læs nedenfor 📖 manual på dansk for ATP 9060E (1 sider) i kategorien Weegschalen. Denne guide var nyttig for 3 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/1
Instruction Of ATP 9060E
This instruction is for the user of the Scale.
We hardly recommend that the user of this Scale to get a good acknowledge about all rules
and the law.
Shown below is the LCD display.
LCD Indicator Meaning
lbs, kg, lb OZ. Indicates the unit of the displayed weight.
Battery (twinkle) Indicates a low battery condition.
The rest of the symbols Not used for this model.
If the object weight exceeds the scale’s weight capacity, it displays “OVER”.
Handling:
1. Press ON /OFF (Red Button) one time to start the scale (All symbols light then count
down to zero).
2. Press one more time to switch off the scale.
3. If necessary, press ZERO (Green Button) to obtain a weight reading of zero.
4. Press UNIT (Yellow Button) to change the unit (lbs, kg and lb OZ cyclically).
General advice:
1. When the Scale is not in and is transported between different working places we
recommend to use a case or any other protection against vibrations and other hard
environmental conditions.
2. Protect the scale with a transparent plastic bag if there is any risk of leakage or when
working in a wet environment.
3. Use only 9VDC battery.


Produkt Specifikationer

Mærke: ATP
Kategori: Weegschalen
Model: 9060E

Har du brug for hjælp?

Hvis du har brug for hjælp til ATP 9060E stil et spørgsmål nedenfor, og andre brugere vil svare dig