Audio-Technica AT-HS6 Manual


Læs nedenfor 📖 manual på dansk for Audio-Technica AT-HS6 (2 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 19 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
Safety precautions
Keep the product out of the reach of small
children to avoid accidental ingestion of
screws, nuts and washers, or damage to
product.
Do not use the product for any purpose other
than to mount a phono cartridge.
Do not put the product in a location where it
is exposed to direct sunlight, near heating
devices, or in places with high temperatures,
high humidity, or high concentrations of dust.
Do not attempt to disassemble or modify the
product.
Do not subject the product to strong impact.
User Manual / Headshell
Thank you for purchasing this Audio-Technica
product. Before using the product, read through this
user manual to ensure that you will use the product
correctly. Please keep this manual for future
reference.
Name of each part
Specifications
Material : Aluminum
Weight
(excluding cartridge
installation screws)
: Approx. 9.3 g (0.33 oz) (including
lead wires)
Approx. 8.4 g (0.30 oz) (excluding
lead wires)
Dimensions
(excluding connector
and protrusions)
: 13.0 mm (0.51”) × 21.4 mm (0.84”)
× 48.9 mm (1.93”) (H × W ×D)
Accessories : Cartridge installation slotted screw
(M2.6) (10 mm × 2 and 8 mm × 2),
Nut x 2, Plastic washer x 2
Specifications are subject to change without notice due to
improvements.
How to install
1. Mount a cartridge onto the headshell using
the cartridge installation slotted screw and
plastic washer provided, and tighten lightly so
that cartridge position can be adjusted.
• When using a cartridge without threaded inserts,
use screws and nuts to install the cartridge.
• Take care that the screws are short enough so as
not to touch and damage the record.
• Read the user manual of the cartridge.
2. Slide the lead tips over the cartridge
connections.
• Do not apply heat.
• Use tweezers, small pliers, and non-magnetic
screwdriver(s) to mount the headshell/cartridge.
•If a lead tip is loose, flatten it out slightly to attach it.
Layout of headshell leads
3. Loosen screws with a non-magnetic
screwdriver and adjust for overhang. Tighten
the screws firmly when position is fixed.
Audio-Technica Corporation
2-46-1 Nishi-naruse, Machida, Tokyo 194-8666, Japan
www.audio-technica.com
©2019 Audio-Technica Corporation
Global Support Contact: www.at-globalsupport.com
ver.1 2018.08.01
162501280-01-02 ver.2 2019.08.01
AT-HS6
If you are unsure about the overhang
adjustment, align the stylus tip with the stylus
on the cartridge that originally came with the
turntable (see figure below).
4. Attach the headshell to the tonearm.
5. Refer to the turntable's user manual and
adjust the tonearm balance, tracking force
and anti-skate.
Other language versions of this manual are
available for download at
http://eu.audio-technica.com/
Top vie
Cross section of screw hole
Screw holes
Side view Rubber washer
Lead tip
Lead wire
Connector
Cartridge installation
slotted screw
Plastic washer
Front view
(left channe
n
t channel / –)
Overhang adjustment
Loosen screws
and adjust the
position
(Unit : mm)
21.419.6
10.5
1.5
2.5
48.9
13.0
Threaded insert
Cartridge that came
with turntable
Make this
distance as
exact as
possible.
Connected cartridge
AT-HS6
W
(left channe t channel / +)


Produkt Specifikationer

Mærke: Audio-Technica
Kategori: Ikke kategoriseret
Model: AT-HS6

Har du brug for hjælp?

Hvis du har brug for hjælp til Audio-Technica AT-HS6 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Audio-Technica Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Kramer

Kramer VP-8X8 Manual

25 November 2024
Kramer

Kramer PT-2C Manual

25 November 2024
Lazer

Lazer Bob+ Manual

25 November 2024
Dometic

Dometic DPS 80 Manual

25 November 2024
Kramer

Kramer 102MX Manual

25 November 2024
Kramer

Kramer FC-18 Manual

25 November 2024
Kramer

Kramer DSP-62-UC Manual

25 November 2024
Tiger

Tiger SKF-H101 Manual

25 November 2024