Audio-Technica ATW-T210a Manual


Læs nedenfor 📖 manual på dansk for Audio-Technica ATW-T210a (1 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 15 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/1
Frequency-agile UHF UniPak® Body-pack Transmitter
ATW-T210a
Specications
Features
Rugged housing with a reversible clothing clip
Recessed locking HRS-type microphone input connector
LED on indicator
10 compatible user-switchable channels in one of two UHF
frequency ranges
Microphone or line input with DC bias voltage
Internal channel selector switch
Internal trim controls for mic and line inputs
Integrated two-position top-mounted power/mute switch
Digital Tone Lock™ to identify the wireless transmitter to the receiver
Operates on two AA batteries
Field replaceable whip antenna
Description
The ATW-T210a wireless UniPak
® body-pack transmitter has both low- and
high-impedance input connections along with a DC bias voltage connec-
tion for use with dynamic and electret condenser microphones as well as
Hi-Z instrument pickups. Separate input trim controls are provided for
each input along with a ten-position channel selector switch. All adjust-
ment controls are hidden behind the transmitter’s battery door and an
adjustment tool is provided with the transmitter. A locking 4-pin HRS-type
input connector is provided for both inputs. The connector is recessed to
protect the connection and input cable. Sophisticated Tone Lock tone
squelch eliminates the need for a separate mute button allowing the
two-position, positive-action mechanical switch to function for both
power and mute. The switch is located on the top of the transmitter
for easy access and can be operated without looking at the transmitter.
An RF power select switch offers high and low settings. A battery
condition indicator shows that the batteries are good. The transmitter
operates on two standard AA batteries providing over eight hours of
continuous operation. Constructed of rugged high-impact materials, the
transmitter incorporates a latching captive battery door, eld replaceable
antenna and reversible belt clip.
Architects and Engineers Specications
The frequency-agile FM wireless body-pack transmitter shall be part of
a wireless system offered in two UHF bands, 656.125 678.500 and
487.125 506.500 MHz. The body-pack transmitter shall have inputs for
microphone and line level inputs. It shall provide DC voltage to power
microphones requiring DC bias. The body-pack transmitter shall have a
reversible clip allowing for up or down cable entry. A two-position
positive-action mechanical power/mute switch operable without looking at
the transmitter shall be provided. Transmitters using separate mute and
power buttons shall be unacceptable. The transmitter shall have a recessed
input connector and illuminated indicator to indicate battery condition. Ten
selectable channels shall be available. Channel selection shall be via a
recessed rotary selector and the proper tool shall be included with the
transmitter. The device shall have an LED indicator when it is turned on.
There shall be individual trim adjustments on each input. The transmitter shall
include a Tone Lock
to identify the wireless transmitter to the wireless
receiver. This transmitter shall operate on two AA batteries and provide an
RF power select switch with high and low settings. All channel settings and
level adjustments shall be hidden behind a latching cover to prevent
unnecessary access. The transmitter shall have a removable and eld
replaceable antenna.
The FM wireless transmitter shall be an Audio-Technica ATW-T210a
or equivalent.
In the interest of standards development, A.T.U.S. offers full
details on its test methods to other industry
professionals on request.
Specications are subject to change without notice.
2000 series wireless systems
High: 30 mW, Low: 10 mW
Following federal and national regulations
Four-pin locking connector
Pin 1: GND
Pin 2: INST INPUT
PIN 3: MIC INPUT
PIN 4: DC BIAS +9V
Two 1.5V AA alkaline (not included)
or two 1.2V AA NiMH (not included)
Recharging power for NiMH batteries
(with ATW-CHG2)
U.S./Canada/Latin America: 3.2 V DC - - - 230 mA x2
Other world areas: 3.2 V DC - - - 320 mA x2
High: 7 hours (alkaline), Low: 9 hours (alkaline)
Depending on battery type and use pattern
66.0 mm (2.60") W x 22.5 mm (0.89") D x
92.3 mm (3.63") H
81 g (2.9 oz), without batteries
RF power output (50 ohms)
Spurious emissions
Input connection
Batteries
Battery life
Dimensions
Net weight
Audio-Technica Corporation
audio-technica.com ©2014 Audio-Technica 0001-0033-02


Produkt Specifikationer

Mærke: Audio-Technica
Kategori: Ikke kategoriseret
Model: ATW-T210a

Har du brug for hjælp?

Hvis du har brug for hjælp til Audio-Technica ATW-T210a stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Audio-Technica Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Elektron

Elektron Overbridge Manual

26 November 2024
Elektron

Elektron Sidstation Manual

26 November 2024
SoundTube

SoundTube IPD-RS82-EZ Manual

26 November 2024
Kramer

Kramer 4x1VB Manual

26 November 2024
Kramer

Kramer RC-63A Manual

26 November 2024
SoundTube

SoundTube IPD-HP82-EZ Manual

26 November 2024
Kramer

Kramer RK-KVM-1U-PP3 Manual

26 November 2024
Gioteck

Gioteck VX-2 (PS3) Manual

26 November 2024