Audix D-Clamp Manual


Læs nedenfor 📖 manual på dansk for Audix D-Clamp (2 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 12 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
DCLAMP
OVERVIEW
The DCLAMP is a low profile, simple-to-use mounting system that eliminates the
need for bulky mic stands. Easily operated, the DCLAMP is provided with a standard
5/8” thread adapter, which allows most mics to be used by just simply changing the
clip. The DCLIP fits the D Series microphones and many pencil condenser mics.
The DCLAMP works on most tension rods used with hand percussion instruments
(such as congas and bongos) as well as standard 9.5 mm and 10.5 mm knurled rods
found on tom and percussion mounts. It provides a nice clean look especially when
used with the Audix right angle XLR mic cable CBLDR25.
The DCLAMP can also be used with the MicroD small condenser mic by simply
replacing the DCLAMP’s gooseneck with the MicroD gooseneck. This allows the
MicroD to be used in tight spaces (congas, timbales, bongos) where a larger dynamic
mic may be hard to position.
PLACEMENT
For best results, position the head of the mic approximately two inches above the
drum head and aimed towards the center of the drum (usually about 45° angle).
Depending on the size and type of microphone being used, the height of the metal
gooseneck will have to be adjusted. Simply loosen the wing nut on the side of the
clip and move the gooseneck into the proper position then tighten. The gooseneck
can also be angled in any direction to achieve the desired position.
Microphone placement is not an exact science. It depends on the instrument, the
player’s style, the type of music, the loudness of the music, the room acoustics, the
sound system, the engineer and, of course, the microphone itself. The DCLAMP is
designed to offer maximum flexibility in mic positioning to yield the best possible
sound.
Experimentation is ultimately the key to achieving the best results for each application.
For more ideas go to
www.audixusa.com.
Tension Rod
Mic Mount
FEATURES
. Flexible multi-position metal gooseneck
. Locks firmly into position
. Fingertip control
. Lightweight, durable and scratch resistant
. Eliminates bulky mic stands
. Works with most microphones
. 1 year warranty
Works with MicroD
(pictured) and other
miniaturized mics.
Works with a wide variety
of dynamic mics. (pictured
with the D2)
Works with condenser
microphones. (pictured
with the SCX1C)


Produkt Specifikationer

Mærke: Audix
Kategori: Ikke kategoriseret
Model: D-Clamp

Har du brug for hjælp?

Hvis du har brug for hjælp til Audix D-Clamp stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Audix Manualer

Audix

Audix DN4 Manual

5 September 2024
Audix

Audix AP62OM5 Manual

21 August 2024
Audix

Audix H60 Manual

21 August 2024
Audix

Audix R42 Manual

21 August 2024
Audix

Audix AP61 Manual

21 August 2024
Audix

Audix AP41 Manual

21 August 2024
Audix

Audix D-Clip Manual

21 August 2024
Audix

Audix AP62 Manual

21 August 2024
Audix

Audix B60 Manual

21 August 2024
Audix

Audix SCX25A Manual

20 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

AOpen

AOpen AM1120T Manual

26 November 2024
AOpen

AOpen DE3125 Manual

26 November 2024
AOpen

AOpen DE5500 Manual

26 November 2024
AOpen

AOpen DT2462M Manual

26 November 2024
AOpen

AOpen DE3129 Manual

26 November 2024
AOpen

AOpen DE35-HD Manual

26 November 2024
AOpen

AOpen DE3650-S Manual

26 November 2024