Aurora LM4221H Manual


Læs nedenfor 📖 manual på dansk for Aurora LM4221H (2 sider) i kategorien Lamineersysteem. Denne guide var nyttig for 2 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
INTRODUCTION
Congratulations on the purchase of your laminator. Now you
can protect your favourite documents up to size such as A4
photographs, certificates, ID cards, letters etc. in a water
resistant, airtight seal. Follow the instructions for proper use
and keep this manual for future reference.
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions
should always be observed including the following:
1. Read all instructions.
2. Do not touch hot surfaces.
3. To protect against risk of electrical hazards, do not
immerse cord, plugs the appliance in water or other or
liquid.
4. Close supervision is necessary when the appliance is used
near children.
5. Unplug from the outlet when not in use and before
cleaning. Allow to cool before cleaning the appliance.
6. Do not operate any appliance with a damaged cord or plug
or after the appliance malfunctions, or has been damaged
in any manner.
7. Do not use outdoors.
8. Do not use the appliance for anything other than the
intended use.
9. Ensure the laminator is turned off when you have finished
laminating.
10. The mains socket sh ld be near the equipment and be ou
easily accessible.
11. Do not laminate sheets containing metal or conductive
materials.
12. If you are laminating a small or irregular shape, please
insert a 2cm/3cm strip of paper against the closed end of
the pouch as shown in the diagram, to prevent jamming.
A short power cord may be provided with this appliance to
reduce hazards resulting from becoming entangled in or
tripping over a longer cord. Extension cords may be used if care
is exercised in their use. If an extension cord is used, the
following must apply:
a. The marked electrical rating should be at least as great as the
electrical rating of the appliance.
b. The extension cord should not drop over the counter top or
tabletop where it can be pulled on by children or tripped over
accidentally.
PART NAME
NOTES
We do not recommend laminating any type of
self-developing photo.
Any photo to be laminated must be dry before processing.
Do not laminate any documents that appear thick or heavy,
as this will get stuck in the laminator (with the thickness
thicker than 0.4mm).
Very thin paper inserted into very thin pouch may cause a
twists and jam the laminator.
In order to avoid creasing, please DO NOT insert the open
side of the film into the laminator first.
When the film exits after being laminated, it may be very
hot and soft . Handle the newly laminated item with care.
Pressing the item with a book or other heavy objects may
help.
This product bonds the laminate sleeve to the item being
processed .It is a permanent seal and cannot be removed.
We do not recommend laminating any collectors items of
value or any item you may wish to remove at a later date.
Do not attempt to laminate coins or thicker items .
HOW TO USE
1. Insert the mains plug into an electric socket and slide the
power switch to the left or right based on the pouch you
use. The POWER indicator will light up.
2. Wait 4-6 minutes for the machine to warm up. Once it has
reached laminating temperature, the READY indicator will
light up.
3. Place the item to be laminated into the laminating pouch,
and centre it within the pouch. Please ensure that your
document or picture is positioned as close to the sealed
edge as possible ensuring there is a margin of 3-9 left mm
between the item to be laminated and the edge of the
pouch.


Produkt Specifikationer

Mærke: Aurora
Kategori: Lamineersysteem
Model: LM4221H

Har du brug for hjælp?

Hvis du har brug for hjælp til Aurora LM4221H stil et spørgsmål nedenfor, og andre brugere vil svare dig