AXESS AXLOC-55SP Manual


Læs nedenfor 📖 manual på dansk for AXESS AXLOC-55SP (2 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 14 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
AXLOC-55SP
INSTALL ATION INSTR UCTIONS
REV. 4/27/20
© COPYRIGHT 2020 METRA ELECTRONICS CORPORATION
Integrate • AxxessInterfaces.com
Wire Color & Function: The audio input wire colors are an EIA standard
for car stereo applications as follows.
INPUT HARNESS
= GroundBlack
Yellow - Battery +12V input
= Remote +12V outputBlue
= Left front (+) inputWhite
= Left front (-) inputWhite/Black
= Right front (+) inputGray
Gray/Black = Right front (-) input
= Reference ground (-)Brown
(Reference ground optional if noise is present)
Note:
Be sure that all audio input connections are polarized or in
phase with each other. That is, the positive output wires from the audio
source need to be connected to the corresponding positive input wires
of the AXLOC-55SP. The same goes for the negative audio wires. Fail-
ure to do this will result in poor bass response and low quality audio.
Adjusting the AXLOC-55SP for maximum performance: After complet-
ing all of the necessary connections, turn the AXLOC-55SP adjustment
pots all of the way down by rotating them completely counter-clock-
wise. Now, turn the stereo system on and adjust the main volume con-
trol on the stereo to approximately 3/4 maximum volume. Select one
of the adjustment pots on the AXLOC-55SP and turn it slowly clockwise
until you notice audio distortion and then stop. Turn the remaining pot
to the same position as the previously adjusted pot. The audio set-up
of the AXLOC-55SP is now complete and ready to be enjoyed.
The AXLOC-55SP is designed to convert speaker level audio to line level
audio. This allows for the installation of line level products such as amplifiers,
EQs and crossovers on systems that do not have RCA line level outputs. In
addition this device will also detect the presence of an audio signal and then
generate a +12V output that can be used to turn-on an aftermarket amplifier.
Features:
55 Watts Maximum Input, Input Circuit Corrects Crossover Distortion Commonly
Found On Other Brands of LOCs, 6:1 Step Down with Variable Output,
Detachable Input Plug, Gold Plated RCAs, Attractive & Durable Enclosure
2 Channel, Adjustable Line Output Converter


Produkt Specifikationer

Mærke: AXESS
Kategori: Ikke kategoriseret
Model: AXLOC-55SP

Har du brug for hjælp?

Hvis du har brug for hjælp til AXESS AXLOC-55SP stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret AXESS Manualer

AXESS

AXESS AXAMP-FD2 Manual

25 Februar 2025
AXESS

AXESS AXAMP-TY1 Manual

25 Februar 2025
AXESS

AXESS AXAMP-TY4 Manual

25 Februar 2025
AXESS

AXESS AXAMP-FD3 Manual

25 Februar 2025
AXESS

AXESS AXAMP-TY2 Manual

25 Februar 2025
AXESS

AXESS AXAMP-TY3 Manual

25 Februar 2025
AXESS

AXESS AXTC-TY1 Manual

27 Januar 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Corbero

Corbero SIROS9100 Manual

26 Februar 2025
Corbero

Corbero RODAS12000 Manual

26 Februar 2025
Telestar

Telestar Top 100 Manual

26 Februar 2025
Roland

Roland VR-3EX Manual

26 Februar 2025
ATen

ATen CS1144D4C Manual

26 Februar 2025
MSI

MSI MAG PANO 100L PZ Manual

26 Februar 2025
ATen

ATen CS1184DP Manual

26 Februar 2025