Bauknecht KGIN 3183 Manual

Bauknecht Køleskab KGIN 3183

Læs nedenfor 📖 manual på dansk for Bauknecht KGIN 3183 (1 sider) i kategorien Køleskab. Denne guide var nyttig for 38 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/1

Refrigerator Compartment

A. Fan and antibacterial and antiodour filter

(depending on the model)

B. Lamp or LED light (depending on the model)

C. Shelves

D. LED lights (depending on the model)

E. Crisper drawer cover

F. Crisper(s)

G. Rating plate (located at side of crisper)

H. Control panel

N. Dairy compartment

O. Door trays

P. Bottle holder (if provided)

Q. Bottle bin

Least cold zone

Intermediate zone

Coldest zone

Fruit and vegetable zone

Freezer Compartment

I. Top drawer (freezing area)

L. Middle and bottom drawers (storage area for

frozen and deep frozen food)

M. Ice cube tray (if provided)

Note: All shelves, door trays and racks are

removable.

The ideal temperatures for preserving foods are

already factory-set.

Carefully read the user handbook provided

before using the appliance.

The characteristics, technical data and images

may vary according to the model.

Eco night function

The Eco night function enables the appliance’s energy consumption to be concentrated in the hours that correspond to the cheapest electricity tariff (generally at night), when electricity is freely

available and costs less compared to daytime (only in countries that utilize a multi-tariff system based on time of day - check your energy tariff with your local electricity utility company). To

activate the function, press the button at the time the cheap tariff begins (depending on your specific tariff). For example, if the cheap rate begins at 8 pm, press the button at that time. When

the Eco night LED is ON, the function is active. Once the function has been activated, the appliance automatically adapts energy consumption based on the time selected, i.e. consuming less

energy during the day than at night.

IMPORTANT: To operate properly, the function must be active during both night and day. The function remains active until deactivated (or it deactivates in the event of a blackout or appliance

switch-off). To deactivate the function, press the button again. When the Eco night LED is OFF, the function is not active.

Note: the appliance’s declared energy consumption refers to operation with the Eco night function deactivated.

5019 400 00950

QUICK GUIDE

What to do if... Possible causes Cures

The control panel is switched off, the appliance does not work. The appliance could be in On/Standby mode.

There may be an appliance power supply problem.

Activate the appliance with the On/Standby button

Make sure:

- there is not a power outage

- the plug is properly inserted in the power socket and the mains double-pole switch (if present) is in the correct position

(i.e. allows the appliance to be powered)

- the household electrical system protection devices are efficient

- the power cable is not broken.

The inside light does not work.

The light may need replacing.

The appliance could be in On/Standby mode

Models with lamp: disconnect the appliance from the power supply, check the lamp and, if necessary, replace it with a

new one (see the section “Lamp or LED replacement”).

Models with LED lights: contact the authorised Service Centre.

Activate the appliance with the On/Standby button

The temperature inside the compartments is not low enough. There could be various causes (see “Cures”)

Make sure:

- the doors close properly

- the appliance is not installed near a heat source

- the set temperature is adequate

- the circulation of air through the vents at the bottom of the appliance is not obstructed

There is water on the bottom of the refrigerator compartment. The defrost water drain is blocked. Clean the defrost water drain hole (see the section “Appliance Maintenance and Cleaning”)

The front edge of the appliance, at the door striker seal, is hot. This is not a defect. It prevents condensation from forming. No cure is necessary.

The red light flashes and an acoustic signal sounds Door open alarm

It is activated when a door remains open for a long period of time.

Close the doors of the product to deactivate the acoustic signal. If the acoustic signal does not go off, it is a power failure

alarm (see the section Power failure alarm).

The red light flashes and an acoustic signal sounds and remains on even with the

door closed.

Power failure alarm

It is activated in case of a prolonged power outage causing an increase in the freezer

compartment temperature.

Note: A different product temperature cannot be set until the power failure alarm is deactivated.

Before deactivating the acoustic signal, it is advisable to pay attention to the temperature shown on the temperature

display, corresponding to the highest temperature reached in the freezer compartment during the power failure. Press

the “Stop Alarm” button briefly to deactivate the acoustic signal. After pressing the button, the temperature display

shows the set temperatures again. If the freezer compartment has not yet reached the optimum food preservation

temperature, the freezer compartment temperature alarm could be activated (see freezer compartment temperature

alarm). Check the food before consuming it.

The red light comes on (without flashing), an acoustic signal sounds and the

freezer compartment temperature display flashes.

Freezer compartment temperature alarm

The freezer compartment temperature alarm indicates that the compartment temperature is not

optimum. This may happen: with first use, after defrosting and/or cleaning, if large amounts of

food are placed inside the freezer or when the freezer door has not been closed properly.

Press the “Stop Alarm” button briefly to deactivate the acoustic signal. The red light goes off automatically when

optimum temperature conditions are reached. If the freezer compartment temperature alarm stays on, contact the

Authorised Service Centre.

The red light comes on, an acoustic signal sounds and the letter “F” flashes on

the display.

Malfunction alarm

The alarm indicates a fault in a technical component. Call the authorised Service Centre. Press the “Stop Alarm” button briefly to deactivate the acoustic signal

UAROBGRUHUSKCZPLFIDKNOSEGRITPTESNLFRGBDE

Fan

The fan is preset as ACTIVE. The fan can

be deactivated by pressing the button on

the base (as shown in the figure). If the

room temperature exceeds 27°C or if there

are water droplets on the glass shelves,

the fan must be on in order to ensure the correct preservation of

food. Deactivation of the fan enables energy consumption to be

optimised.

Printed in Italy 05/12 - Bauknecht

Freezer compartment temperature

A different temperature can be set using the button.“Freezer”

Fast Freeze

Press the button for 3 seconds 24 hours before “Freezer”

placing large amounts of food in the freezer compartment. When

the function is activated, the icon lights up. This function is

automatically deactivated after 48 hours, or manually by pressing

the button again.“Freezer”

Note: The food to be frozen must not be touching already frozen

food.

Key Lock

The key lock can be activated/deactivated by keeping the “key

lock” button pressed for 3 seconds, until a confirmation sound is

heard (the icon lights up). If you press any button while the key

lock is active, you will hear a sound and the “Key Lock” icon will

start to flash.

ProFresh function

This function is used to quickly reach optimum preservation

conditions regarding temperature and humidity inside the

appliance. The fan must also be on for it to work properly.

Temperature display

The display can alternately show the refrigerator compartment

temperature (between 2°C and 8°C) or the freezer compartment

temperature (between -16°C and -24°C).

Refrigerator compartment temperature

A different temperature can be set using the button.“Fridge”

Deactivating acoustic alarms (Stop Alarm)

To deactivate the acoustic signals, press the

“Stop Alarm” button briefly.

On/Standby

Press for 3 seconds to switch off the

appliance. In Standby mode, the two hyphens

and the light in the refrigerator compartment

come on. To switch the product back on,

simply press the button briefly again.

Note: This operation does not disconnect the

appliance from the power supply.

Produkt Specifikationer

Mærke:	Bauknecht
Kategori:	Køleskab
Model:	KGIN 3183

Har du brug for hjælp?

Hvis du har brug for hjælp til Bauknecht KGIN 3183 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Køleskab Bauknecht Manualer

Bauknecht BNF70400S Manual

21 December 2024

Bauknecht KSN 19 IN 1 Manual

21 December 2024

Bauknecht KGSF 202G IN 2 Manual

4 December 2024

Bauknecht KGI 3103-A Manual

15 November 2024

Bauknecht KGA 285 PURE OPTIMA WS Manual

12 Oktober 2024

Bauknecht KGIE 1182 A+ Manual

6 Oktober 2024

Bauknecht KDN 4382 A2+ PT Manual

6 Oktober 2024

Bauknecht KGCE 3254-0 Manual

4 Oktober 2024

Bauknecht KGNA 301 WS Manual

4 Oktober 2024

Bauknecht KGCE 3252-2 Manual

2 Oktober 2024

Køleskab Manualer

Nyeste Køleskab Manualer

LG GBB569NSAGB Manual

22 December 2024

Bosch KFZ20SX0 Manual

22 December 2024

LG LTC22350SS Manual

22 December 2024

AEG SANTO3150-6KG Manual

22 December 2024

Bosch KSZ2BVE00 Manual

22 December 2024

Bosch KSZ2BVH00 Manual

22 December 2024

Bosch KSZ2AVR00 Manual

22 December 2024

Bosch KSZ2AVP00 Manual

22 December 2024

Bosch KFZ40SX0 Manual

22 December 2024

LG GTBV36PZGKD Manual

22 December 2024