Behringer MicroPower PS400 Manual

Behringer Mikrofon MicroPower PS400

Læs nedenfor 📖 manual på dansk for Behringer MicroPower PS400 (2 sider) i kategorien Mikrofon. Denne guide var nyttig for 30 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/2

BEHRINGER MICROPOWER PS400

WELCOME TO BEHRINGER

Thank you for showing your confidence in us by purchasing the

BEHRINGER MICROPOWER PS400. Use this ultra-compact phantom

power supply with mixers and microphone preamplifiers that do not

include phantom power sources. The PS400:

supplies phantom power (+12 V or +48 V) to any type of

condenser microphone

routes the microphone signal to a mixer or

a microphone preamplifier

Please read the safety instructions that appear at the

end of this document.

CONNECTORS AND CONTROL ELEMENTS

This section illustrates and describes each PS400 connector and

control element.

1 3 4 5

Fig. 1: PS400 connectors and control elements

12 V connector:

To connect the power supply unit to the PS400, use the

12 V connector. Connecting the power supply unit to the

mains automatically switches the PS400 on. To disconnect

the unit from the mains, pull out the main cord plug.

ON LED:

As soon as the unit is connected to the mains, the ON LED is

illuminated.

MIC INPUT connector:

To send a microphone signal to the PS400, you need an

audio cable that includes XLR connectors. Plug:

one XLR connector into the MIC INPUT connector

the other XLR connector into the condenser microphone

MIC THRU connector:

To route the microphone signal from the PS400 to a mixer

or a microphone preamplifier, you need an audio cable that

includes XLR connectors.

Plug:

one XLR connector into the MIC THRU connector

the other XLR connector into the mic input of a mixer or,

alternatively a microphone preamplifier

+12 V / +48 V PHANTOM VOLTAGE switch:

To select the voltage that you need, push this switch toward

+12 V +48 V or, alternatively . For details about what value

to use, refer to instructions from the microphone

manufacturer.

SERIAL NUMBER: To register the unit, use the serial number that is

located on the bottom of the PS400.

SETUP EXAMPLE

The following is an example of how to set up the PS400:

PROMIXER DJX700

MICROPOWER PS400

STUDIO CONDENSER

MICROPHONE C-1

MIC INPUT MIC THRU

Fig. 2: PS400 setup example

WARRANTY

For our current warranty terms, please refer to our website at

http://www.behringer.com.

Other language versions of this documentation...

Die deutsche Anleitung ist erhältlich @ www.behringer.com

Manuel francophone en téléchargement sur www.behringer.com

Manual en español disponible en www.behringer.com

Manuali italiani disponibili @ www.behringer.com

Русскоязычное руководство @ www.behringer.com

Polska instrukcja dostępna jest pod adresem @ www.behringer.com

Nederlandse handleiding beschikbaar @ www.behringer.com

Suomenkielinen käyttöohje saatavilla osoitteesta www.behringer.com

Svensk manual finns tillgänglig på www.behringer.com

Dansk vejledning findes på @ www.behringer.com

Manual português disponível @ www.behringer.com

Åëëçíéêü åã÷åéñßäéï õðÜñ÷åé äéáèÝóéìï óôç äéåýèõíóç www.behringer.com

Produkt Specifikationer

Mærke:	Behringer
Kategori:	Mikrofon
Model:	MicroPower PS400
Vekselstrømsindgangsspænding:	100 - 240 V
Vekselstrømsindgangsfrekvens:	50 - 60 Hz
Bredde:	103 mm
Dybde:	32 mm
Højde:	58 mm
Vægt:	360 g
Produktfarve:	Hvid
Støjniveau:	- dB
LED-indikatorer:	Strøm
Stik:	XLR
Total effekt:	2 W
Maksimal indgangsstrøm (@ 110V):	+48V, +12V A
Maks. udgangsstrøm (+12 V):	0.15 A
Ventilator diameter:	- mm