BEKO LSP3671DW Manual

BEKO Køleskab LSP3671DW

Læs nedenfor 📖 manual på dansk for BEKO LSP3671DW (28 sider) i kategorien Køleskab. Denne guide var nyttig for 45 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/28

57 5762 0000/AL

LP1671DB - LP1671DW - LP1671DS - LSP 3671DB

LSP3671DW -LSP3671DS

EN /

Tall Larder Fridge

User manual

Please read these instructions first before using your appliance

Thank you for choosing a Beko appliance.

Please take some time to read this user manual before using your appliance, to

ensure you know how to safely operate the controls and functions.

Carefully follow all unpacking and installation instructions to ensure the

appliance is correctly connected and fitted prior to use.

Please write your product model and serial number on the last page of this

user manual, and store in a safe location close to the appliance for easy future

reference.

This user manual may also be applicable for several other models. Differences

between models will be listed.

If you have any questions or concerns, please call our contact centre or find

help and information online at www.beko.co.uk

Symbols and their descriptions

This instruction manual contains the following symbols:

C Important information or useful usage tips.

A Warning against dangerous conditions for life and property.

B Warning against electric voltage.

SUPPLIER’S NAME MODEL IDENTIFIER (*)

INFORMATION

The model information as stored in the product data base

can be reached by entering following website and searching

for your model identiﬁer (*) found on energy label.

https://eprel.ec.europa.eu/

C Figures that take place in this instruction manual are schematic and may not

correspond exactly with your product. If the subject parts are not included in the

product you have purchased, then it is valid for other models.

1 Your refrigerator

Congratulations on your choice of a quality Appliance which has been Beko

designed to give you service for many years.

10 *

11 *

1. Adjustable door shelves

2. Water dispenser filling tank

3. Egg section

4. Water dispenser reservoir

5. Bottle shelf

6. Adjustable Front Feet

7. Freezing and Storage (store

fresh food to be frozen lower down)

8. Chiller with glass cover

9. Adjustable shelves

10. Wine rack

11. Thermostat knob

2 Warnings

 Do not connect your

appliance to the electricity

supply until all packing and

transit protectors have been

removed.

 If transported horizontally

leave to stand upright for at

least 4 hours before switching

on to allow compressor oil to

settle

 If you are discarding an old

refrigerator with a lock or latch

fitted to the door, disable the

lock/latch, ensure that it is left

in a safe condition to prevent

the entrapment of young

children.

 This fridge/freezer must

only be used for its intended

purpose i.e the storing and

freezing of edible foodstuff.

 Do not dispose of the

appliance on a fire. At Beko,

the care and protection

of our environment is an

ongoing commitment. This

appliance which is among

the latest range introduced

is particularly environment

friendly. Your appliance

contains non CFC / HFC

natural substances in the

cooling system (Called

R600a) and in the insulation

(Called cyclopentane) which

are potentially flammable if

exposed to fire. Therefore,

take care not to damage, the

cooling circuit / pipes of the

appliance in transportation

and in use. In case of damage

do not expose the appliance

to fire or potential ignition

source and immediately

ventilate the room where the

appliance is situated.

 We suggest you contact your

local authority for disposal

information and facilities

available.

 To obtain the best possible

performance and trouble free

operation from your appliance

it is very important to carefully

read these instructions.

 On delivery, check to make

sure that the product is not

damaged and that all the parts

and accessories are in perfect

condition.

 Ensure that the plug remains

readily accessible. Do not use

multiple adapter or extension

cable.

 Failure to observe these

instructions may invalidate

your right to free service

during the guarantee period.

 Keep ventilation openings, in

the appliance enclosure or in

the built-in structure, clear of

obstruction.

 Do not damage the refrigerant

circuit.

 Do not use electrical

appliances inside the food

storage compartments of the

appliance, unless they are of

the type recommended by the

manufacturer.

 We suggest you keep these

instructions in a safe place for

easy reference.

 This appliance can be used

by children aged from 8 years

and above and persons with

reduced physical, sensory

or mental capabilities or

lack of experience and

knowledge if they have

been given supervision or

instruction concerning use

of the appliance in a safe

way and understand the

hazards involved. Children

shall not play with the

appliance. Cleaning and user

maintenance shall not be

made by children without

supervision.

 Children should be supervised

to ensure that they do not

play with the appliance.

Electrical requirements

Before you insert the plug into

the wall socket make sure that

the voltage and the frequency

shown on the rating plate inside

the appliance corresponds to

your electricity supply.

Rating label is on the left hand

side of fridge inner liner.

We recommend that this

appliance be connected to the

mains supply via a suitable

switched and fused socket. The

appliance must be positioned

so that the plug is accessible.

WARNING:

When positioning the

appliance ensure the supply

cord is not trapped or damaged.

Should the mains lead of the

appliance become damaged or

should it need replacing at any

time, it must be replaced by a

special purpose made mains

lead which can only be obtained

from a Beko authorised service

agent.

Warning! This appliance

must be earthed

If the fitted moulded plug is

not suitable for your socket,

then the plug should be cut

off and an appropriate plug

fitted. Destroy the old plug

which is cut off as a plug with

bared cord could cause a shock

hazard if inserted into a socket

elsewhere in the house.

The moulded plug on this

appliance incorporates a 13

A fuse. Should the fuse need

to be replaced an ASTABEAB

approved BS 1362 fuse of the

same rating must be used. Do

not forget to refit the fuse

cover. In the event of losing the

fuse cover the plug must not be

used until a replacement fuse

cover has been fitted.

Colour of the replacement

fuse cover must be the same

colour as that visible on the pin

face of the plug. Fuse covers

are available from any good

electrical store.

Compliance with WEEE

Directive and Disposing of

the Waste Product:

This product complies

with EU WEEE

Directive (2012/19/

EU). This product

bears a classification

symbol for waste

electrical and electronic

equipment (WEEE).This product

has been manufactured with

high quality parts and materials

which can be reused and are

suitable for recycling. Do not

dispose of the waste product

with normal domestic and other

wastes at the end of its service

life. Take it to the collection

center for the recycling of

electrical and electronic

equipment. Please consult your

local authorities to learn about

these collection centers.

Compliance with rohs

directive:

The product you have

purchased complies with EU

RoHS Directive (2011/65/EU).

It does not contain harmful and

prohibited materials specified

in the Directive.

Package information

Packaging materials of the

product are manufactured

from recyclable materials in

accordance with our National

Environment Regulations. Do

not dispose of the packaging

materials together with the

domestic or other wastes. Take

them to the packaging material

collection points designated by

the local authorities.

3 Installation

Transportation

Instructions

1. The appliance should be

transported only in a vertical upright

position. The packing as supplied

must be intact during transportation.

2. If during the course of

transport the appliance has to be

transported horizontally, the product

must only be laid on its right hand

side (when facing the door front) and

it must not be operated for at least

4 hours to allow the system to settle

after the appliance is brought back to

upright position.

3. Failure to comply with the

instructions could result in damage

occurring to the appliance. The

manufacturer will not be held

responsible if these instructions are

disregarded.

4. The appliance must be

protected against rain, moisture and

other atmospheric influences.

5. When positioning your

appliance take care not to damage

your flooring, pipes, wall coverings

etc. Do not move the appliance by

pulling by the door or handle.

6. Empty any water in the drain

tray and Water Dispenser tank before

moving. See section ‘Defrosting’

and ‘Care & cleaning’ for further

information.

7. Make sure that the defrost

water pipe at the back of the product

is fixed to the plastic evaporating pan

on the top of the compressor, to avoid

defrost water spillage on the floor.

Important

Care must be taken when carry ng i

the appl ance to avo d touch ng i i i

the bottom of the condenser metal

support/p pework at the back of the i

appl ance as you m ght njure your i i i

f ngers and hands or damage your i

product.

Important :

Make sure that mains cable is not

caught under the appliance during and

after carrying/moving the appliance,

to avoid the mains cable becoming cut

or damaged.

Do not attempt to sit or stand on top

of your appliance. You could injure

yourself and damage the appliance.

Beko decl nes to accept any l ab l ty i i i i

should the nstruct ons not be i i

followed.

Installation Instructions

1. Fit the two plastic wall spacers

supplied with the appliance onto

the condenser at the back of the

appliance by rotating 1/4 turn.

2. Locate the appliance on a

smooth surface.

3. To ensure it is standing upright

adjust the two front feet by turning

clockwise or anti-clockwise, until

it is in firm contact with the floor.

Correct adjustment of feet avoids

excessive vibration and noise.

4. A special receptacle is supplied

to store the mains plug during transit.

The receptacle is fixed at the back

of the cabinet on the side of the

compressor. Gently remove the plug

from the receptacle. Never pull the

mains cord, you may damage the

appliance. In case of transportation,

ensure you locate the plug in the

receptacle provided to avoid transit

damage.

5. The space in the room where

the appliance is installed must not be

smaller than 10 cubic metres.

Changing the illumination

lamp

To change the Bulb/LED used for

illumination of your refrigerator, call

your AuthorisedService.

The lamp(s) used in this appliance

is not suitable for household room

illumination. The intended purpose

of this lamp is to assist the user to

place foodstuffs in the refrigerator/

freezer in a safe and comfortable

way.The lamps used in this appliance

have to withstand extreme physical

conditions such as temperatures

below -20 °C.

(only chest and upright freezer)

45 °

180°

Reversing The Doors

We recommend that you reverse the

door before switching on for the first

time.

Tools required: Small and medium size

flat and cross-headed screwdrivers, a

pair of pliers.

Spare Parts supplied in the plastic

bag: The following parts, which are

exclusively for left hand side fitted

hinge operation are supplied in a

plastic bag with the appliance:

- Door top trim hinge covers – there

are 2 different parts, one for each side

of top trim.

We suggest you keep all the parts

supplied in the plastic bag and also

parts, which have been removed when

reversing the door, in a safe place for

possible future, re-use.

Important:

We suggest you ask somebody to

help you when moving the appliance

around and to hold the door when

removing / re-fitting hinges and the

door to avoid any injury and damage

to the product.

Please refer to diagrams supplied. To

follow numbers in brackets below,

refer to the main diagram.

1. Switch off the appliance at the

socket outlet and pull out the mains

plug.

2. Remove all loose items and

fittings and food inside the appliance.

3. Gently prise off plastic hinge

covers on both sides of front top

panel using a small flat-headed

screwdriver. (1-2)

4. Unscrew the bolts of the top

hinge and remove top hinge. (3)

5. Remove door carefully off the

bottom hinge and stand door upright

in a safe place.(4)

6. Gently prise off plastic hinge

cover on door top trim. Fit the other

door top trim plastic off hinge cover

supplied in the plastic bag.(5)

7. Gently tilt the appliance back

against a strong wall on its rear side

sufficiently to allow the lower hinge

to be removed. Take care to protect

the appliance, your wall and floor

coverings. You can utilise the original

packaging to do this.Once you tilt the

appliance back, check to make sure

the appliance is completely stable and

safe before you carry on. (6)

8. Unscrew and remove the front

feet and 1 bolt. (7)

9. Unscrew and remove the

bottom hinge. (8)

10. Unscrew and remove the

bottom hinge door stopper and

bushing and reposition them on the

other side while rotating the

bushing 180°. (9)

11. Fit the bottom hinge and

tighten the screws as shown in figure.

(10)

12. Fit the other front feet as

shown in figure. (11)

13. Rotate the top hinge 180°.

Unscrew the hinge pin and re-tighten

it to the opposite side. (12)

14. Fit the top hinge on the left

hand side bushing of the door. (13)

15. Locate and re-fit door to

bottom hinge pin. (14)

Before operating4

Starting

Final Check

Before you start using the

refrigerator check that:

1. For a freestanding appliance;

‘this refrigerating appliance is not

intended to be used as a built-in

appliance.

2. The front feet have been

adjusted so the appliance is level.

3. The interior is dry and air can

circulate freely around the outside of

the product.

4. Clean the interior as

recommended under “CLEANING AND

CARE.”

5. Insert the plug into the wall

socket and switch on the electricity

supply.When the door is open the

interior light will come on.

6. You will hear a noise as the

compressor starts up. The liquid and

gases sealed within the refrigeration

system may also give rise to noise,

whether the compressor is running or

not which is quite normal.

7. We recommend that you set

the thermostat thermostat to 3

(three) and monitor the temperature

to ensure the appliance maintains

desired storage temperatures (See

section Temperature Control and

Adjustment).

8. Do not load the appliance

immediately it is switched on. Wait

until the correct storage temperature

has been reached.

9. We recommend that you check

the temperature with an accurate

thermometer

10. Your product requires adequate

air circulation to function efficiently.

If the product will be placed in an

alcove, remember to leave at least 5

cm clearance between the product

and the ceiling, rear wall and the side

walls.

11. If the product will be placed

in an alcove, remember to leave at

least 5 cm clearance between the

product and the ceiling, rear wall and

the side walls. Check if the rear wall

clearance protection component is

present at its location (if provided

with the product). If the component

is not available, or if it is lost or fallen,

position the product so that at least

5 cm clearance shall be left between

the rear surface of the product and

the wall of the room. The clearance

at the rear is important for efficient

operation of the product.

Using the water dispenser

*optional

CIt is normal for the first

few glasses of water taken

from the dispenser to be

warm.

CIf the water dispenser is

not used for a long period

of time, dispose of first few

glasses of water to obtain

fresh water.

1. Push in the lever of the water

dispenser with your glass. If you are

using a soft plastic cup, pushing the

lever with your hand will be easier.

2. After filling the cup up to the

level you want, release the lever.

CPlease note, how much

water flows from the

dispenser depends on

how far you depress the

lever. As the level of water

in your cup / glass rises,

gently reduce the amount

of pressure on the lever

to avoid overflow. If you

slightly press the arm, the

water will drip; this is quite

normal and not a failure.

Filling the water

dispenser's tank

Water tank filling reservoir is located

inside the door rack.

1. Open the cover of the tank.

2. Fill the tank with fresh drinking

water.

3. Close the cover.

CDo not fill the water

tank with any other liquid

except for water such as

fruit juices, carbonated

beverages or alcoholic

drinks which are not

suitable to use in the water

dispenser. Water dispenser

will be irreparably damaged

if these kinds of liquids are

used. Warranty does not

cover such usages. Some

chemical substances and

additives contained in these

kinds of drinks/liquids may

damage the water tank.

CUse clean drinking water

only.

Produkt Specifikationer

Mærke:	BEKO
Kategori:	Køleskab
Model:	LSP3671DW
Bredde:	595 mm
Dybde:	655 mm
Højde:	1714 mm
Vægt:	62400 g
Produktfarve:	Hvid
Lampe type:	LED
Indbygget skærm:	Ingen
Pakkevægt:	68500 g
Pakkedybde:	730 mm
Pakkebredde:	665 mm
Pakkehøjde:	1794 mm
Årligt energiforbrug:	148 kWh
Placering af apparat:	Fritstående
Dørhængsel:	Højre
Tilsluttet belastning:	- W
Støjniveau:	38 dB
Energieffektivitetsskala:	A til G
Støjemissionsklasse:	C
Energieffektivitetsklasse:	F
Vendbare døre:	Ja
Klimaklasse:	SN-T
Energieffektivitetsindeks (EEI):	124
Køleskab antal hylder/kurve:	5
Antal grøntsagsskuffer:	1
Æggebakke:	Ja
Køleskabsdøre:	4
Køleskab, netto rumindhold:	367 L
Total netto kapacitet:	367 L
Køleskab indvendigt lys:	Ja
Hylder, materiale:	Glas
Flaskeholder:	Ja
Frisk zone, aflukke:	Ja
Pakke tara vægt:	5835 g
Automatisk afrimning (køleskab):	Ja
Minimal driftstemperatur:	10 °C
Maksimal driftstemperatur:	43 °C
Nettokapacitet i FreshZone rum:	367 L
Justerbare hylder:	Ja
Vandbeholder:	Ja
Udvidet polystyren (EPS) pakkevægt:	1363 g
Vandforsyningstype:	Vandtank
Dispenserplacering:	Gennem døren
3:	4 g
Dørhåndtag-note:	Eksternt håndtag