BEKO WTL120G Manual

BEKO Wasmachine WTL120G

Læs nedenfor 📖 manual på dansk for BEKO WTL120G (6 sider) i kategorien Wasmachine. Denne guide var nyttig for 2 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/6
Other functionsCautionsCautions
FULLY AUTOMATIC WASHING MACHINE
Operation Manual
It is most important that this instruction book should be retained with the
appliance for future reference. Should the appliance be sold or transferred
to another owner, or should you move house and leave the appliance, always
ensure the book is supplied with the appliance in order that the new owner
can get to know the functioning of the appliance and the relevant warnings.
These warnings have been provided in the interest of safety. You must read
them carefully before installing or using the appliance.
12.0kg
WTL120G
Use of detergent
S f tpeci ica ion
Weight
220-240V~ 50Hz
Rated voltage and
frequency
Rated capacity of wash
and spin
Water level/water volume
( )about
Inlet pressure
WTL120GModel
Rated input power
Product Dimensions
Wash 540W
spin 560W
0.05MPa-0.85MPa
12.0kg
10/80L 9/75L 8/70L 7/65L
6/60L 5/55L 4/50L 3/45L
2/41L 1/37L
About 43kg
W600mm D622mm H970mm
Please insert the plug into the power socket
with rated voltage 240V A/C.
Do not make the electric cable bended,
stretched, twisted, strapped or changed,
pressed or nipped. If the supply cord is
damaged, it must be replaced by the
manufacturer,its service agent or similarly
qualified persons in order to avoid a
hazard. The pin of the
plug must remain clean.
Please clean it carefully
with dry cloth if it is dirty.
Do not use water hotter than 50
Ventilation holes
at the bottom
Soft item
Do not share the same socket with other electric
appliances. Do not use the damaged plug or loose
socket.
Warning
Symbol definition
Always unplug the appliance and turn off
the water when the power is cut, moving or
cleaning the washing machine, or it is not in
use. Do not insert or pull off the plug with
wet hand.
Do not wash raincoat, bike cover, feather
dress and waterproof laundries, which will
caused the washing machine to have
abnormal vibrations during spinning.
If the machine is situated on a carpeted
floor, please adjust the feet in order to allow
air to circulate freely.
Forbidden
Pay special attention to the
warning symbols. There may be
serious risks to personal body
safety or damages to the washing
machine if not follow.
Please stop doing the contents with
this symbol, otherwise it will damage
the appliance or injure your personal
body.
Do not put hands into the working machine.
It is dangerous even if the speed is very slow.
Take special care of the children, and forbid
them to climb on the washing machine.
It is dangerous to alter the specifications or
attempt to modify this product in any way.
Do not overload the appliance or put any
hotgoods(such as the kettle with hot water)
on thewashing machine.
Garments which have been in contact with
volatile petroleum products should not be
machine washed.
Keep the appliance away from direct
sunlight and heat sources like the heater.
This appliance is not intended for use by
persons(including children) with reduced
physical, sensory or mental capabilities, or lack
of experience and knowledge, unless they have
been given supervision or instruction concerning
use of the appliance by a person responsible for
their safety.
Children should be supervised to ensure that
they do not play with the appliance.
Preparation before operation
Preparation before washing
1. Connect the inlet hose and open the tap.
2. This appliance must be earthed. Confirm
the socket is earthed reliably and insert the
power plug. The earth terminal should not
link to gas pipeline, tap pipeline etc.
3. Hang up the drainpipe.
Warning: the temperature of the water should be less than 50
Before washing the laundries, please pay attention to the
followings:
Make sure if
there is special
requirements for
the laundries
Before washing,
empty all pockets of
small objects which
may have been left
inside(coins, keys,
screws etc.).
Knot the long
band, fasten the
buttons and close
the zippers.
Do not overload
the machine.
Load the laundry
loosely alternating
large items with
small ones.
Sort the laundry
according to the
type of fabric,
color-fastness and
how dirty it is. Put
thin laundries,
woolens and such
prone to wear and
tear laundries into
washing bag.
A. Make sure the laundries are washable.
B. It is essential to wash new colored items separately when washing for the first time. White
items should not be washed with colored items.
C. Please immerge the non-absorbable laundries by hand.
D. Some stains such as fruit, wine, grass, rust etc. are difficult to remove and should be treated
before washing with specific products, which can be found in most household shops.
In some cases it may help to soak the stain before washing with a special pre-soak product
or biological detergent.
E. Overturn the nap fabric and long floss laundries before putting them into the machine.
F. Do not put the laundries polluted by chemicals into the machine directly.
G.Very small item(handkerchiefs, ribbons, socks etc) should be washed in a washing bag or a
pillow case.
Load laundries
The capacity of washing and spinning of the machine is refer
to the largest weight of the standard laundries under dry
condition. Washing quantity shall be lower than the rated
capacity. The maximum capacity of this machine is 12.0kg.
Different thickness, size and type of the laundries will
influence the actual washing capacity.
Do not select high water level when laundries are less than
1.5kg to avoid water splashing.
Remarks avoid splashing of water and waste of washing powder, water level should not
be too high if laundries are too small.
Error Code Error Code explanation Solution
E1 After draining for 5 minutes,it still
does not reach to the minimum
of water level
Please refer to Page 8 for troubleshooting
E0 The top lid is opened
when preset is started Close the top lid and clear the alarm
E2 The top lid open when spinning Close the top lid and clear the alarm
E4 After inflow of water for 20
minute, it still does not reach to
the water level set
Please refer to Page 8 for troubleshooting
E3 Spin is not balance Open the top lid, place the laundries equally,
then close it and clear the alarm
E5
F1
The top lid is opened after setting
child-lock C lose the top lid and cl ear the al a rm
Water Level sensor is abnormal Cut off the power supply to find a professional
staff to process
Notice if there is still fault after check above items, please remove the plug from power supply :
and contact with local service team
Fault explanation
Detergent box
How to use bl ace h How to use the washing powder
Dissolve in the machine directly not suitable
for preset program
1. Low water level.
2. Add the washing powder, and run for 30
seconds to dissolve it completely.
3. Put laundries in and select suitable water
level.
The instant dissolving of the washing powder
1. Prepare warm water of 30 in a container.
2. Pour the powder while stirring to fully
dissolve it.
Washing powder with poor quality or not used
for a long period may get blocked, please clean
the detergent box in time.
Withdraw the dispenser box before adding
detergent
Pour concentrated synthetic washing powder
into the box directly as shown in the left
illustration.
The dosage of the washing powder, please
refer to below.
It is suggested to use low sud washing powder.
Fill water to the selected level,
dilute the bleach in the container,
and pour it slowly into the washing
tub.
Do not use bleach for colored or
figured laundries as they are prone
to lose colors.
Do not put bleach to laundries
directly.
Refer to the manual for the usage
and quantity of the bleach.
Please dissolve powder bleach
before use.
Before washing, please ensure the tap is
openand the inlet hose is installed properly.
It is suggested to use low foam washing
powder.
Any objects such as coins, safety pins, nails,
screws, stones or any other hard, sharp
material can cause extensive
damage and must not be
placed into the machine.
To prevent the lint from blocking cascade
outlet during washing, please keep the lint
filter in good condition, install it to proper
position and clean it in time.
Dismantle Fit on
Don t install the washing machine in
bathroom or damp places. Do not wash the
machine with water, do not put wet clothes
on the control panel film.
this machine has two feed valves ,when you use
only one feed valve, must put the inlet cap on
the other feed valve.
Inlet cap
Notice:
1.Imbalance adjustment:
During spinning, if the laundries are not placed equally in the tub, it would cause Violent
vibration. This machine has imbalance adjustment function, and the vibration testing system
will supervise the running. Once vibration is beyond certain level, the adjustment system will
start automatically to adjust the imbalance.
2.Power supply is cut off automatically:
1) If you did not start the program in 10 minutes after pressing the power supply button, the
power supply will be cut off automatically.
2) After the washing is finished, alarm buzzes and the power supply will cut off automatically.
3.Child lock function:
1)When child lock function is set, all the buttons will be locked including POWER. If the top lid
is opened during the washing machine working, the washing will be stopped and give an alarm.
But if you can close the top lid in 5 seconds, the alarm will stop and the washing machine will
continue working. If cannot close the top lid in 5 seconds, the washing machine will begin
draining if there is water in the inner tub, even closing the top lid is not valid. During the
draining, alarm will buzz every 10 seconds, when the water in the inner tub is about 5cm
higher, alarm will buzz every 10 minutes.When the draining is finished, the washing machine
will be in the state of waiting, if close the top lid, the washing machine is unlocked and start
working as previous setting.
2)Once child lock is set, if top lid is opened over 5 seconds during washing or rinse(there is
water in the inner tub), washing machine will drain and alarm will buzz. If you unlock the
function during draining, the washing machine will add water to water level set and continue
working.
4.Water recycle function
When water recycle function is set, after the last rinse finished, the washing machine will not drain
and spin.SPIN and WATER RECYCLE indicator light will be flashing and alarm will be given,the
washing machine will stop working (if nobody operate, the alarm will be given every 10 minutes,
in 1 hour, power supply will be cut off automatically). When press START/PAUSE, WATER
RECYCLE indicator light is on and the washing machine begin to drain and spin, the user can
reuse the water.


Produkt Specifikationer

Mærke: BEKO
Kategori: Wasmachine
Model: WTL120G

Har du brug for hjælp?

Hvis du har brug for hjælp til BEKO WTL120G stil et spørgsmål nedenfor, og andre brugere vil svare dig




Wasmachine BEKO Manualer

BEKO

BEKO WMY 61432 M Manual

4 Oktober 2024
BEKO

BEKO WTE7522XAW Manual

4 Oktober 2024
BEKO

BEKO WY940P44EW Manual

3 Oktober 2024
BEKO

BEKO BM3WT1241IW Manual

29 September 2024
BEKO

BEKO WKB 51001 MS Manual

22 September 2024
BEKO

BEKO WTV87112BC1 Manual

20 September 2024
BEKO

BEKO WML 15040 KL Manual

14 September 2024
BEKO

BEKO WRE 7634 XWS0 Manual

13 September 2024
BEKO

BEKO WM 5554 T Manual

13 September 2024
BEKO

BEKO B5W5841AW Manual

9 September 2024

Wasmachine Manualer

Nyeste Wasmachine Manualer