BenQ MW809ST Manual

BenQ videoprojektorer MW809ST

Læs nedenfor 📖 manual på dansk for BenQ MW809ST (48 sider) i kategorien videoprojektorer. Denne guide var nyttig for 21 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/48

MX808ST/MX825ST/MW809ST/

MW826ST

Digital Projector

User Manual

V 1.00

2 Warranty and Copyright information

Warranty and Copyright information

Limited warranty

BenQ warrants this product against any defects in material and workmanship, under normal usage and

storage.

Proof of purchase date will be required with any warranty claim. In the event this product is found to be

defective within the warranty period, BenQ's only obligation and your exclusive remedy shall be

replacement of any defective parts (labor included). To obtain warranty service, immediately notify the

dealer from which you purchased the product of any defects.

Important: The above warranty shall be void if the customer fails to operate the product in accordance

with BenQ's written instructions, especially the ambient humidity must be in-between 10% and 90%,

temperature in-between 0°C and 35°C, altitude lower than 4920 feet, and avoiding to operate the

projector in a dusty environment. This warranty gives you specific legal rights, and you may have other

rights which vary from country to country.

For other information, please visit www.BenQ.com.

reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language or

computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical,

manual or otherwise, without the prior written permission of BenQ Corporation.

Disclaimer

BenQ Corporation makes no representations or warranties, either expressed or implied, with respect

to the contents hereof and specifically disclaims any warranties, merchantability or fitness for any

particular purpose. Further, BenQ Corporation reserves the right to revise this publication and to make

changes from time to time in the contents hereof without obligation to notify any person of such

revision or changes.

*DLP, Digital Micromirror Device and DMD are trademarks of Texas Instruments. Others are

copyrights of their respective companies or organizations.

Patents

Please go to http://patmarking.benq.com/

for the details on BenQ

projector patent coverage.

3 Table of Contents

Table of Contents

Warranty and Copyright information ................................................................................ 2

Important safety instructions .............................................................................................. 4

Introduction .......................................................................................................................... 7

Shipping contents .......................................................................... ................................... .......................... 7

Projector exterior view ..................................................................... ................................... .................... 8

Controls and functions....................................................................... .................................. ..................... 9

Positioning your projector ................................................................................................. 12

Choosing a location ........................................................................... ......................12................................

Obtaining a preferred projected image size....................................................................................... 13

Mounting the projector .......................................................................................................................... 14

Adjusting the projected image ................................................................................... ............. 15..............

Connection .......................................................................................................................... 17

Operation ............................................................................................................................ 20

Starting up the projector .................................................................. ................................... ................... 20

Using the menus ........................................................... ..................................................... ....................... 21

Securing the projector ....................................................................... .................................. ................... 23

Switching input signal .................................................................... ....................... 24....................................

Shutting down the projector ................... ................................................................................. ............. 25

Direct power off ......................................................... ..................................................... ........................ 25

Menu operation ................................................................................................................... 26

Basic menu ......................................................................................... ...................... 26................................

Advanced menu ..................................................................................................................................... 28

Maintenance ........................................................................................................................ 36

Care of the projector .......................................................................................... .....................36...............

Lamp information .....................................................................................................................................36

Troubleshooting ................................................................................................................. 42

Specifications ...................................................................................................................... 43

Projector specifications .................................................................... .................................. ....................43

Dimensions ............................................. ....................................................................... ............................44

Timing chart............................................................... .................................................... ............................ 45

4 Important safety instructions

Important safety instructions

Your projector is designed and tested to meet the latest standards for safety of information technology

equipment. However, to ensure safe use of this product, it is important that you follow the instructions

mentioned in this manual and marked on the product.

1. Please read this manual before you

operate your projector. Save it for future

reference.

2. Do not look straight at the projector

lens during operation. The intense light

beam may damage your eyes.

3. Refer servicing to qualified service

personnel.

4. Always open the lens shutter (if any) or

remove the lens cap (if any) when the

projector lamp is on.

5. The lamp becomes extremely hot during

operation. Allow the projector to cool for

approximately 45 minutes prior to removing

the lamp assembly for replacement.

6. In some countries, the line voltage is NOT

stable. This projector is designed to operate

safely within a mains voltage between 100 to

240 volts AC, but could fail if power cuts or

surges of ±10 volts occur. In areas where

the mains voltage may fluctuate or cut

out, it is recommended that you

connect your projector through a power

stabilizer, surge protector or

uninterruptible power supply (UPS).

7. Do not block the projection lens with any

objects when the projector is under

operation as this could cause the objects to

become heated and deformed or even cause a

fire. To temporarily turn off the lamp, use the

blank function.

8. Do not operate lamps beyond the rated lamp

life. Excessive operation of lamps beyond the

rated life could cause them to break on rare

occasions.

Produkt Specifikationer

Mærke:	BenQ
Kategori:	videoprojektorer
Model:	MW809ST
Vekselstrømsindgangsspænding:	100 - 240 V
Vekselstrømsindgangsfrekvens:	50 - 60 Hz
Bredde:	296 mm
Dybde:	239 mm
Højde:	120 mm
Vægt:	2600 g
Brugervejledning:	Ja
Produktfarve:	Hvid
Indbygget skærm:	Ingen
Produkttype:	Projektor med kort projiceringsafstand
Wi-Fi:	Ingen
Naturligt aspektforhold:	16:10
Understøttede videotilstande:	480i,480p,576i,576p,720i,1080i,1080p
Antal HDMI-porte:	1
DVI-port:	Ingen
Antal USB 2.0-porte:	2
Ethernet LAN:	Ingen
Skærmvisning (OSD):	Ja
OSD-sprog:	ARA,BUL,CHI (SIMPL),CHI (TR),CRO,CZE,DAN,DEU,DUT,ENG,ESP,FIN,FRE,GRE,HIN,HUN,IND,ITA,JPN,KOR,NOR,PER,POL,POR,RUM,RUS,SWE,THA,TUR,VIE
Strømforbrug (standby):	0.5 W
Strømforbrug (typisk):	200 W
Driftstemperatur (T-T):	0 - 40 °C
Markedspositionering:	Short throw
Hurtig start guide:	Ja
Kabler inkluderet:	Vekselstrøm
Understøttede grafikopløsninger:	640 x 480 (VGA),1280 x 800 (WXGA),1920 x 1200 (WUXGA)
Indgang til pc'en (D-Sub):	Ja
Understøttede billedformater:	16:10
Støjniveau:	33 dB
Fjernbetjening inkluderet:	Ja
Strømkilde:	Vekselstrøm
Placering:	Desktop,Ceiling
Indbygget kortlæser:	Ingen
Full HD:	Ja
Pc lydindgang:	Ja
Slot til kabellås:	Ja
HDMI- stiktype:	Fuld størrelse
Antal farver:	1.073 milliarder farver
Kontrastforhold (typisk):	20000:1
Horisontal scanningsområde:	15 - 102 kHz
Antal VGA-porte (D-sub):	3
AC (strøm) indgang:	Ja
Kabellåseslids type:	Kensington
Garantibevis:	Ja
Fast brændvidde:	6.9 mm
Brændviddeområde:	- mm
Projektor lysstyrke:	3000 ANSI lumens
Projektionsteknologi:	DLP
Projektor indbygget opløsning:	WXGA (1280x800)
Skærmstørrelse kompatibilitet:	70 - 120 "
Projiceringsafstand:	- m
Trapezkorrektion, vertikal:	-30 - 30 °
Matrix størrelse:	0.65 "
Vertikalt scanningsområde:	23 - 120 Hz
Forskydning:	105 %
Throw-forhold:	0.49:1
RS-232-porte:	1
Levetid for lyskilde:	5000 t
Lampeeffekt:	200 W
Levetid for lyskilde (økonomisk tilstand):	10000 t
Lyskilde type:	Lampe
3D Ready:	Ja
Seriel grænsefladetype:	RS-232
Matrix-type:	DMD
Støjniveau (økonomisk tilstand):	29 dB
PC-lydudgang:	Ja
HD-Ready:	Ja
Maksimal analog opløsning:	1920 x 1200 pixel