Bixolon STP-103 Manual

Bixolon Etiketprinter STP-103

Læs nedenfor 📖 manual på dansk for Bixolon STP-103 (18 sider) i kategorien Etiketprinter. Denne guide var nyttig for 24 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/18

User’s Manual

STP-103

Thermal Printer

Rev. 1.04

http://www.bixolon.com

Rev. 1.04 - 2 -

STP-103

■

■■ Safety Precautions

In using the present appliance, please keep the following safety regulations in order to

prevent any hazard or material damage.

WARNING

Violating following instructions can cause serious injury or death.

Do not bend the cable by force or leave it under any

heavy object.

• A damaged cable can cause a fire.

Do not plug in or unplug with your hands wet.

• You can be electrocuted.

Keep the plastic bag out of children’s reach.

• If not, a child may put the bag on his head.

Do not pull the cable to unplug.

• This can damage the cable, which is the origin of a fire or a

breakdown of the printer.

You must use only the supplied adapter.

• It is dangerous to use other adapters.

Do not plug several products in one multi-outlet.

• This can provoke over-heating and a fire.

• If the plug is wet or dirty, dry or wipe it before usage.

• If the plug does not fit perfectly with the outlet, do not plug in.

• Be sure to use only standardized multi-outlets.

PROHIBITED

PROHIBITED PROHIBITED

ONLY SUPPLIED ADAPTER

PROHIBITED

Rev. 1.04 - 3 -

STP-103

CAUTION

Violating following instructions can cause slight wound or damage the appliance.

Do not use the printer when it is out of order. This

can cause a fire or an electrocution.

• Switch off and unplug the printer before calling your dealer.

Do not let water or other foreign objects in the

printer.

• If this happened, switch off and unplug the printer before

calling your dealer.

Use only approved accessories and do not try to

disassemble, repair or remodel it for yourself.

• Call your dealer when you need these services.

• Do not touch the blade of auto cutter.

Install the printer on the stable surface.

• If the printer falls down, it can be broken and you can hurt

yourself.

Keep the desiccant out of children’s reach.

• If not, they may eat it.

If you observe a strange smoke, odor or noise from

the printer, unplug it before taking following

measures.

• Switch off the printer and unplug the set from the mains.

• After the disappearance of the smoke, call your dealer to

repair it.

TO UNPLUG

PROHIBITED

DISASSEMBLING

PROHIBITED

TO UNPLUG

PRINTER

DEALER

PRINTER

Rev. 1.04 - 4 -

STP-103

■

■■ Warning - U.S.A

This equipment has been tasted and found to comply with the limits for a Class A digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a

commercial environment. This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and uses in accordance with the instruction manual,

may cause harmful interference to radio communications. Operation of this equipment in a

residential area is likely to cause harmful interference in which case the user will be

required to correct the interference at his own expense.

This equipment has been tasted and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by one or more of the following

measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which

the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

■

■■ Notice - Canada

This Apparatus complies with class "A" limits for radio interference as specified in the

Canadian department of communications radio interference regulations.

■

■■ Waste Electrical and Electric Equipment (WEEE)

This marking shown on the product or its literature, indicates that is should not

be disposed with other household wastes at the end of its working life, To

prevent possible harm to the environment or human health from uncontrolled

waste disposal, please separate this from other types of wastes and recycle it

responsibly to promote the sustainable reuse of material resources. Household

users should contact either the retailer where they purchased this product, or

their local government office, for details of where and how they can take this item for

environmentally safe recycling. Business users should contact their supplier and check the

terms and conditions of the purchase contract. This product should not be mixed with other

commercial wastes for disposal.

■

■■ Label Material : PET

Rev. 1.04 - 6 -

STP-103

■

■■ Table of Contents

1. Setting Up the Printer................................................................................................... 7

1-1 Unpacking.................................................................................................................. 7

1-2 Locating the Printer.................................................................................................... 7

1-3 Functions ................................................................................................................... 8

2. Connecting the cables.................................................................................................. 9

2-1 Connecting the AC adapter to the printer .................................................................. 9

2-2 Connecting the printer to your Computer................................................................. 10

2-2-1 STP-103 Serial Interface ..............................................................................11

2-2-2 STP-103 Parallel Interface............................................................................11

2-2-3 STP-103DK Serial Interface (Option) .......................................................... 12

2-2-4 STP-103DK Parallel Interface (Option)........................................................ 13

3. Setting the Dip Switches............................................................................................ 14

4. Roll Paper Installation ................................................................................................ 15

5. Self Test....................................................................................................................... 16

6. Hexadecimal Dumping ............................................................................................... 17

7. Specification ............................................................................................................... 18

Rev. 1.04 - 7 -

STP-103

1. Setting Up the Printer

1-1 Unpacking

The items illustrated below are included with your printer.

If any items are damaged or missing, please contact your dealer for assistance.

Roll paper

Adaptor

Power cord

Cable

Printer

1-2 Locating the Printer

Avoid location in direct sunlight or excessive heat.

Avoid or storing the printer in the place subject to excessive moisture.

Do not use or store, horizontal surface for the printer.

Avoid places subject to intense vibration or shock.

Make sure that there is enough space around the printer so that it can be used easily.

Manual CD

Produkt Specifikationer

Mærke:	Bixolon
Kategori:	Etiketprinter
Model:	STP-103
Bredde:	116 mm
Dybde:	180 mm
Højde:	90 mm
Produktfarve:	Sort, sølv
Driftstemperatur (T-T):	0 - 45 °C
Udskrivningsteknologi:	Direkte termisk
Maksimal opløsning:	203 x 203 dpi
Forbindelsesteknologi:	Ledningsført
LED-indikatorer:	Ja
Effektkrav:	24V DC
Kompatible operativsystemer:	Windows 95\nWindows 98\nWindows ME\nWindows NT4.0\nWindows XP\nWindows 2003 Server\nOPOS
Farve:	Ingen
Standard grænseflader:	Parallel
Drivere inkluderet:	Ja
Strømforbrug:	1500 mA
Flashhukommelse:	8 MB
Understøttet papirbredde:	58 mm
Udskrivningshastighed:	50 mm/sek.
Maksimal rullediameter:	60 mm
Bufferstørrelse:	15 KB
Indbyggede stregkoder:	CODABAR (NW-7), EAN13, EAN8, ITF-14, UPC-A
Antal parallelle porte:	1
Auto-skærer:	Ja
Tape skæring:	Vejledning
Gennemsnitlige cyklusser mellem fejl (MCBF):	30000000