Black Box VSP-DLDVI1X2 Manual

Black Box Splitter VSP-DLDVI1X2

Læs nedenfor 📖 manual på dansk for Black Box VSP-DLDVI1X2 (16 sider) i kategorien Splitter. Denne guide var nyttig for 61 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/16

Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S.

call 724-746-5500) • FREE technical support 24 hours a day, 7 days

a week: Call 724-746-5500 or fax 724-746-0746 • Mailing address:

Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018

Web site: www.blackbox.com • E-mail: info@blackbox.com

Customer

Support

Information

Easily split and distribute dual-link DVI source video

to two or four different screens.

Dual Link DVI Splitters

VSP-DLDVI1X2

VSP-DLDVI1X4

724-746-5500 | blackbox.com Page 2

Trademarks Used in this Manual

Black Box and the Double Diamond logo are registered trademarks

of BB Technologies, Inc.

UL is a registered trademark of Underwriters Laboratories.

Any other trademarks mentioned in this manual are acknowledged

to be the property of the trademark owners.

724-746-5500 | blackbox.com Page 3

FCC and IC RFI Statements/NOM Statement

FEDERAL COMMUNICATIONS COMMISSION AND INDUSTRY

CANADA RADIO FREQUENCY INTERFERENCE STATEMENTS

This equipment generates, uses, and can radiate radio-frequency energy,

and if not installed and used properly, that is, in strict accordance with the

manufacturer’s instructions, may cause inter ference to radio communication.

It has been tested and found to comply with the limits for a Class A computing

device in accordance with the specifications in Subpart B of Part 15 of FCC rules,

which are designed to provide reasonable protection against such interference

when the equipment is operated in a commercial environment. Operation of this

equipment in a residential area is likely to cause interference, in which case the

user at his own expense will be required to take whatever measures may be

necessary to correct the interference.

Changes or modifications not expressly approved by the party responsible

for compliance could void the user’s authority to operate the equipment.

This digital apparatus does not exceed the Class A limits for radio noise

emis sion from digital apparatus set out in the Radio Interference Regulation

of Industry Canada.

Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant

les limites applicables aux appareils numériques de classe A prescrites dans le

Règlement sur le brouillage radioélectrique publié par Industrie Canada.

Normas Oficiales Mexicanas (NOM)

Electrical Safety Statement

INSTRUCCIONES DE SEGURIDAD

1. Todas las instrucciones de seguridad y operación deberán ser leídas antes

de que el aparato eléctrico sea operado.

2. Las instrucciones de seguridad y operación deberán ser guardadas para

referencia futura.

3. Todas las advertencias en el aparato eléctrico y en sus instrucciones de

operación deben ser respetadas.

4. Todas las instrucciones de operación y uso deben ser seguidas.

724-746-5500 | blackbox.com Page 4

NOM Statement

5. El aparato eléctrico no deberá ser usado cerca del agua — por ejemplo,

cerca de la tina de baño, lavabo, sótano mojado o cerca de una alberca,

etc.

6. El aparato eléctrico debe ser usado únicamente con carritos o pedestales

que sean recomendados por el fabricante.

7. El aparato eléctrico debe ser montado a la pared o al techo sólo como sea

recomendado por el fabricante.

8. Servicio—El usuario no debe intentar dar servicio al equipo eléctrico más

allá a lo descrito en las instrucciones de operación. Todo otro servicio

deberá ser referido a personal de servicio calificado.

9. El aparato eléctrico debe ser situado de tal manera que su posición no

interfiera su uso. La colocación del aparato eléctrico sobre una cama, sofá,

alfombra o superficie similar puede bloquea la ventilación, no se debe

colocar en libreros o gabinetes que impidan el flujo de aire por los orificios

de ventilación.

10. El equipo eléctrico deber ser situado fuera del alcance de fuentes de calor

como radiadores, registros de calor, estufas u otros aparatos (incluyendo

amplificadores) que producen calor.

11. El aparato eléctrico deberá ser connectado a una fuente de poder sólo

del tipo descrito en el instructivo de operación, o como se indique en el

aparato.

12. Precaución debe ser tomada de tal manera que la tierra fisica y la

polarización del equipo no sea eliminada.

13. Los cables de la fuente de poder deben ser guiados de tal manera que no

sean pisados ni pellizcados por objetos colocados sobre o contra ellos,

poniendo particular atención a los contactos y receptáculos donde salen

del aparato.

14. El equipo eléctrico debe ser limpiado únicamente de acuerdo a las

recomendaciones del fabricante.

15. En caso de existir, una antena externa deberá ser localizada lejos de las

lineas de energia.

16. El cable de corriente deberá ser desconectado del cuando el equipo no

sea usado por un largo periodo de tiempo.

17. Cuidado debe ser tomado de tal manera que objectos liquidos no sean

derramados sobre la cubierta u orificios de ventilación.

724-746-5500 | blackbox.com Page 5

NOM Statement

18. Servicio por personal calificado deberá ser provisto cuando:

A: El cable de poder o el contacto ha sido dañado; u

B: Objectos han caído o líquido ha sido derramado dentro del aparato; o

C: El aparato ha sido expuesto a la lluvia; o

D: El aparato parece no operar normalmente o muestra un cambio en su

desempeño; o

E: El aparato ha sido tirado o su cubierta ha sido dañada.

724-746-5500 | blackbox.com Page 6

Safety Instructions

The splitters have been tested for conformance to safety regulations and

requirements, and have been certified for international use. However, like all

electronic equipment, the splitters should be used with care. Please read and

follow the safety instructions to protect yourself from possible injury and to

minimize the risk of damage to the unit.

• Follow all instructions and warnings marked on this unit.

• Do not attempt to service this unit yourself, except where explained in this

manual.

• Provide proper ventilation and air circulation and do not use near water.

• Keep objects that might damage the device away from it and be sure to place

this unit on a stable surface.

• Use only the power adapter and power cords and connection cables designed

for this unit.

• Do not use liquid or aerosol cleaners to clean this unit. Always unplug the

power to the device before cleaning.

724-746-5500 | blackbox.com Page 7

Table of Contents

1. Specifications ................................................................................................8

2. Overview ................................................................................................

2.1 Introduction ........................................................................................ 9

2.2 Features ..............................................................................................

2.3 What’s Included ..................................................................................

2.4 Hardware Description .......................................................................

2.4.1 VSP-DLDVI1X2 .....................................................................

2.4.2 VSP-DLDVI1X4 ......................................................................

3. Configuration .............................................................................................

3.1 DIP Switch .........................................................................................

3.2 EDID Learning ...................................................................................

4. Hardware Installation .................................................................................

Appendix. Troubleshooting ..............................................................................

A.1 Contacting Black Box........................................................................15

A.2 Shipping and Packaging ...................................................................

724-746-5500 | blackbox.com Page 8

Chapter 1: Specifications

1. Specifications

Audio Support — No

CEC Channel — N/A

DVI Compliance — DVI 1.1

ESD Protection — (1) human-body model: +19kV (air-gap discharge)

± 12 kV (contact discharge)

Firmware Update — Via RS-232 port

HDCP Compliance — No

Housing — Metal enclosure

Input DDC Channel — 5 volts (peak-to-peak, TTL)

Input TMDS Channel — 1.2 volts (peak-to-peak)

PCB Stack-Up — 4-layer board;

Impedance control: Differential: 100 ohms,

Single: 50 ohms

Resolutions — Up to 2560 x 1600

Video Bandwidth — 300 MHz

Connectors — VSP-DLDVI1X2: Input: (1) DVI-I (29-pin female digital only),

Output: (2) DVI-I (29-pin female digital only),

RS-232: (1) mini DB9;

VSP-DLDVI1X4: Input: (1) DVI-I (29-pin female digital only),

Output: (4) DVI-I (29-pin female digital only),

RS-232: (1) mini DB9

Temperature Tolerance — Operating: 32 to 104° F (0 to 40° C);

Storage: -4 to +140° F (-20 to +60° C)

Relative Humidity — 20 to 90%, noncondensing

Power — Input: AC input: 100–240 VAC, 50–60 Hz, 0.8 A;

Output: 5 VDC, 4 A;

Consumption (maximum): 15 Watts

Size — VSP-DLDVI1X2: 1"H x 2.2"W x 8.2"D (2.4 x 5.7 x 21 cm);

VSP-DLDVI1X4: 1.7"H x 3.9"W x 8.6"D (4.3 x 10 x 21.9 cm)

Weight — VSP-DLDVI1X4: 1.6 lb. (0.7 kg);

VSP-DLDVI1X2: 0.9 lb. (0.4 kg)

724-746-5500 | blackbox.com Page 9

Chapter 2: Overview

2. Overview

2.1 Introduction

The Dual Link DVI Splitter (VSP-DLDVI1X2 or VSP-DLDVI1X4) transmits

super-high-definition graphics to 2 or 4 different locations without losing

quality. It can also function as a typical single link 4-port DVI splitter. Use the

splitter for CAD, post production, broadcast, or control room applications.

2.2 Features

• DVI 1.1 compliant.

• Provides a wide frequency range: up to 300 MHz.

• Enables EDID learning using a DIP switch.

• Firmware upgradable via an RS-232 connection.

• Uses wallmount housing design for easy installation.

NOTES:

1. The VSP-DLDVI1X2 and VSP-DLDVI1X4 do not support HDCP.

2. To correctly display dual link DVI, users must pay attention to the EDID

content. The graphics card will send video according to the presented EDID.

2.3 What’s Included

Your package should contain the following items. If anything is missing

or damaged, contact Black Box Technical Support at 724-746-5500

or info@blackbox.com.

VSP-DLDVI1X2:

• (1) 1 x 2 Dual Link DVI Splitter

• (1) 5-VDC, 4-A power supply

• (2) mounting screws

• This user’s manual

VSP-DLDVI1X4:

• (1) 1 x 4 Dual Link DVI Splitter

• (1) 5-VDC, 4-A power supply

• (2) mounting screws

• This user’s manual

724-746-5500 | blackbox.com Page 12

Chapter 3: Configuration

3. Configuration

3.1 DIP Switch

Figure 3-1 shows the DIP switch on the VSP-DLDVI1X2 or VSP-DLDVI1X4 unit.

Table 3-1 describes the settings.

Figure 3-1. DIP switch.

Table 3-1. DIP switch settings.

Pin #1 Pin #2 EDID Feature

OFF (UP) OFF (UP) Default for dual-link mode.

OFF (UP) ON (DOWN) Default for single-link mode.

ON (DOWN) ON (DOWN) EDID learning mode.

ON (DOWN) OFF (UP) Reserved mode.

NOTE: For the VSP-DLDVI1X2 unit, only DVI output 2 can be used to learn EDID.

For the VSP-DLDVI1X4 unit, only DVI output 4 can be used to learn EDID.

3.2 EDID Learning

Follow these steps to identify the output display.

1. Connect the output display to Output 2 on the VSP-DLDVI1X2 or to Output 4

on the VSP-DLDVI1X4.

2. Adjust the DIP switch to EDID learning mode (both switches are ON).

3. Unplug the power adapter, then plug it back it again.

4. The Power LED will start blinking.

5. When the EDID learning is done, the LED will stop blinking.

724-746-5500 | blackbox.com Page 13

Chapter 4: Hardware Installation

4. Hardware Installation

Broadcast DVI Signal to 2 or 4 DVI Displays

1. Switch off all devices, including monitors.

2. Connect to the receivers.

3. Connect a DVI source to the DVI IN port.

4. Plug in a 5-VDC power supply (included).

5. Power on the DVI monitors.

6. Power on the DVI source.

Display with DVI input Display with DVI input

Laptop with DVI output

DVI cable

DVI cableDVI cable

VSP-DLDVI1X2

Figure 4-1. VSP-DLDVI1X2 installation diagram.

724-746-5500 | blackbox.com Page 14

Chapter 4: Hardware Installation

Displays with DVI input Displays with DVI input

DVI cables

DVI cable

Laptop with DVI output

VSP-DLDVI1X4

Figure 4-2. VSP-DLDVI1X4 installation diagram.

724-746-5500 | blackbox.com Page 15

Appendix: Troubleshooting

Appendix. Troubleshooting

A.1 Contacting Black Box

If you determine that your splitter is malfunctioning, do not attempt to alter or

repair the unit. It contains no user-serviceable parts. Contact Black Box Technical

Support at 724-746-5500 or info@blackbox.com.

Before you do, make a record of the history of the problem. We will be able to

provide more efficient and accurate assistance if you have a complete

description, including:

• the nature and duration of the problem.

• when the problem occurs.

• the components involved in the problem.

• any particular application that, when used, appears to create the problem or

make it worse.

A.2 Shipping and Packaging

If you need to transport or ship your splitter:

• Package it carefully. We recommend that you use the original container.

• If you are returning the unit, make sure you include everything you received

with it. Before you ship for return or repair, contact Black Box to get a Return

Authorization (RA) number.

Chapter

724-746-5500 | blackbox.com

About Black Box

Black Box provides an extensive range of networking and infrastructure

products. You’ll find everything from cabinets and racks and power and surge

protection products to media converters and Ethernet switches all supported

by free, live 24/7 Tech support available in 30 seconds or less.

Great tech support is just 30 seconds away

at 724-746-5500 or blackbox.com.

Black Box Tech Support: FREE! Live. 24/7.

Tech support the

way it should be.

VSP-DLDVI1X2, version 4

Produkt Specifikationer

Mærke:	Black Box
Kategori:	Splitter
Model:	VSP-DLDVI1X2
Vekselstrømsindgangsspænding:	100-240 V
Vekselstrømsindgangsfrekvens:	50 - 60 Hz
Vægt:	400 g
Produktfarve:	Sort
Pakkebredde:	171.45 mm
Pakkehøjde:	76.2 mm
Strømforbrug (typisk):	20 W
Dimensioner (BxDxH):	208 x 56 x 25 mm
DC-in-stik:	Ja
Udgangsspænding:	5 V
Pakkelængde:	266.7 mm
Videoudgang:	2x DVI
Video porttype:	DVI
Video indgang:	1
Antal videoporte:	3
Båndbredde:	300 Mhz