Blomberg DWS55100SS Manual

Blomberg Opvaskemaskine DWS55100SS

Læs nedenfor 📖 manual på dansk for Blomberg DWS55100SS (45 sider) i kategorien Opvaskemaskine. Denne guide var nyttig for 44 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/45

DWS 55100 SS

DWS 55100 FBI

Dishwasher

User manual

DWS 55100 SS

DWS 55100 FBI

Dishwasher

User manual

2USA

•Use only detergents or rinse

aids recommended for use in a

household dishwasher and keep

them in a dry place out of the

reach of children. Check that the

detergent dispenser is empty

after the completion of each wash

program.

•Dishwasher detergents are

alkaline. They can be dangerous

if inhaled or swallowed. Avoid

contact with skin and eyes and

keep children and infirm persons

away from the dishwasher when

the door is opened. Consult a

doctor immediately if detergent

has been swallowed or inhaled.

•Do not drink water from the

dishwasher! Harmful residues

could be present.

•Under certain conditions hydrogen

gas may be produced in a hot

water heater system that has not

been used for two weeks or more.

Hydrogen gas is explosive. If the

hot water system has not been

used for such period, before using

the dishwasher turn on all hot

water taps and let the water flow

from each for several minutes.

This will release any accumulated

hydrogen gas. As gas is

flammable, do not smoke or use

an open flame during this time.

•Do not store or use flammable

liquids or vapors in the area of the

dishwasher.

•When loading items to be washed,

position sharp items so that they

are not likely to damage the door

seal and load sharp knives with

the handles up to reduce the risk

of cut-type injuries.

•Do not wash plastic items unless

they are marked “dishwasher

safe” or the equivalent. For plastic

items not so marked, check the

manufacturer’s recommendations.

•If a malfunction occurs, switch

off the appliance and turn off the

water supply to the dishwasher.

•Please do not attempt to carry the

dishwasher by yourself in order

to avoid potential injuries. Two or

more people are needed to move

a dishwasher.

•Before cleaning or carrying out

maintenance, switch off the

appliance, disconnect the power

plug and turn off the water supply.

•Repairs and technical

modifications must be carried

out exclusively by a qualified

technician.

•If the dishwasher is not in use for

an extended period of time (i.e.

vacation home), we recommend

you check that the baskets are

empty, leave the inside of the

dishwasher clean, leave the

door cracked open to allow air

to circulate and turn off both the

power and water supply to the

dishwasher.

•This appliance must be grounded.

In the event of a malfunction

or breakdown, grounding will

reduce the risk of electric shock

by providing a path of least

resistance for electric current. This

appliance is equipped with a cord

having an equipment-grounding

conductor and a grounding plug.

The plug must be plugged into an

appropriate outlet that is installed

and grounded in accordance with

all local codes and ordinances.

•Potential hazards exist if any

equipment uses electricity, water

and moving parts.

•This appliance must be connected

to a grounded metal, permanent

wiring system, or an equipment-

grounding conductor must be

3USA

run with the circuit conductors

and connected to the equipment-

grounding terminal or lead on the

appliance.

•This appliance produces ozone

within the washing compartment

during normal operation. Long-

term exposure to ozone or

exposure at elevated levels may

result in respiratory problems,

especially for the infirmed, elderly

and children.

•It is the legal responsibility

of parents/legal guardians to

supervise or instruct concerning

use of the machine when the

children become old enough to

operate.

•Do not leave the door open in

order not to cause a tripping

hazard.

•Remove the door to the washing

compartment when removing

an old dishwasher from service

or discarding it. Ensure that the

appliance presents no danger to

children while being stored for

disposal.

•Remove the door lock or door of

the washing compartment before

disposing dishwasher so that

children or small animals can not

trapped inside.

•Old appliances may contain

materials that can be recycled.

Please contact your local recycling

authority about the possibility of

recycling these materials.

•Please check the water supply

line periodically. It is susceptible

to breakage. It becomes less

flexible as time goes by.Replace

it immediately when it is torn, cut,

swollen or there is water leakage.

•Please keep the dishwasher

package out of the reach of

children after unpacking it.

WARNING:If your

dishwasher is equipped with

internal illumination, lamp

should only be replaced by

the Authorised Service Agent

in case of failures that may

occur on the lamp.

AWARNING:Improper

connection of the equipment-

grounding conductor can

result in a risk of electric

shock. Check with a qualified

electrician or service

representative if you are in

doubt whether the appliance

is properly grounded. Do not

modify the plug provided with

the appliance, if it will not

fit the outlet, have a proper

outlet installed by a qualified

electrician.

AWARNING:Warning:

This product may contain

chemicals known to the state

of California to cause cancer

or birth defects or other

reproductive harm.

SAVE THESE INSTRUCTIONS

4USA

2. INSTALLATION

WARNING:When installing

the dishwasher, follow basic

precautions, including the

following:

The dishwasher installation must be

performed in accordance with the

installation manual. If you did not

receive an installation manual order it

by calling or you may 1-800-459-9848

also download it from our web site at

www.blombergappliances.com

•Please check the standarts and

local codes for placement of

machine.

•Installation, maintenance and

repair should be performed by

a qualified installer. Work by

unqualified persons could be

dangerous and may void the

warranty.

•Do not operate the appliance if

damaged, malfunctioning, partially

disassembled or if it has missing

or broken parts.

•Before installation or service,

disconnect the power supply to the

work area by unplugging the unit,

“tripping” the circuit breaker or

removing the fuse.

•Only connect the dishwasher

to the power supply when all

installation and plumbing work is

complete.

•Never connect the ground wire

to gas lines, or hot water pipes,

plumbing lines.

•Do not install or store the

dishwasher where it can be

exposed to below freezing

temperatures or exposed to

weather.

•Dishwasher must be secured

to adjacent cabinetry using the

brackets provided. Failure to

do this may cause damage to

property or bodily injury.

•Connect to a properly rated,

protected and sized power supply

circuit to avoid electrical overload.

The dishwasher is designed for an

electrical supply of 120 V (volts),

60 Hz (hertz), AC, connected to

a dishwasher-dedicated, properly

grounded electrical circuit with

a fuse or breakers rated for

15 amperes. Electrical supply

conductors shall be a minimum

of # 16 AWG copper wire rated

at 75 °C (167 °F) or higher.

These requirements must be met

to prevent injury and machine

damage. Consult a qualified

electrician if in doubt.

•Do not use any extension cord or

portable outlet device to connect

the dishwasher to a power supply.

AWARNING:Danger of

suffocation! Ensure that

any plastic wrappings,

bags, small pieces etc. are

disposed of safely and kept

out of the reach of children.

5USA

1. Upper rack

2. Upper spray arm

3. Cutlery basket

4. Detergent dispenser

5. Door

6. Control panel

7. Guiding track for the upper rack

8. Lower spray arm

9. Filters

10. Lower rack

11. Model and Serial Tag

12. Turbo fan heat drying system (MODEL DEPENDING)

3. GETTING TO KNOW YOUR DISHWASHER

6USA

4. LOADING THE

DISHWASHER

1. Pull the handle to open the door.

If the door is opened during

operation, the dishwasher will stop

running. Once the door is closed

the program will continue.

Upper rack (MODEL DEPENDING)

Top rack load pattern for 8 place

settings

ACAUTION:Hot steam can

escape! Danger of serious

burns or other injury.

2. Remove coarse food leftovers

from tableware.

3. Now you can load the dishwasher.

Lower rack (MODEL DEPENDING)

Bottom rack load pattern for 8 place

settings

ACAUTION:Large knives and

other utensils with sharp tips

and edges must be placed

horizontally into the upper

rack due to risk of injury.

Other smaller knives and

sharp utensils should be

placed with sharp side down

in the cutlery basket.

ACAUTION:Use extreme

caution when removing

knives and other sharp

utensils from the dishwasher.

These items may have

shifted position during the

wash program, and may be

wet or slippery.

7USA

CAUTION:The cup racks are

designed to support cups,

glasses and kitchen utensils.

When the cup racks are in

the dishwasher do not lean

on or use the cup racks to

support your body weight.

•Your dishwasher holds a maximum

of 8 place settings.

•Place all containers such as cups,

glasses and pots into the dishwasher

with the opening facing downwards

(so that no water can collect).

•Small and light items can go into the

upper rack.

•Long and narrow items are placed in

the middle of the racks.

•Place all large and very dirty items in

the lower rack.

•Dishes and cutlery should not be

placed above each other.

•Glasses should not touch each other.

•The movement of the spray arms

must not be hindered.

•Do not overload your dishwasher

and pay attention to manufacturer

instructions regarding dishes which

are appropriate for use in for a

dishwasher. Only with suitable dishes

(mentioned in section 5) will you

obtain optimal washing results with a

sensible use of energy.

4.1 UPPER RACK

Load the upper rack with dessert

plates, cups, glasses etc.

ADJUSTABLE SHELVES

(MODEL DEPENDING)

8USA

FOLDING TINES

(MODEL DEPENDING)

There are “folding tines” in the upper

rack to allow you more space to

accommodate glasses or cups.

Simply pull in the first front folding tine,

move it to left and right to place in A B

another positon. When you need, take

the tines down until the tines fall down.





LOWER UPPER RACK

1. To lower the upper rack, hold and

press in the rack lever on one

side and carefully lower the rack

without releasing the lever .B



2. Repeat the procedure with the

lever on the opposite side of the

rack.

CNOTICE: Make sure that

both levers catch in the same

height position.

VARIABLE HEIGHT SETTING

(MODEL DEPENDING)

The upper rack is equipped with a

lifting mechanism which enables you

to change the height of the rack even if

it is fully loaded, and without having to

remove it from the dishwasher.

LIFT UPPER RACK

1. To lift the upper rack to a higher

position, hold it on one side and

carefully pull it upwards .A

2. To lift the opposite side of the rack,

hold it and pull it upwards in the

same manner.

9USA

HEIGHT SETTING

(MODEL DEPENDING)

In certain models, the height setting of

the upper rack may be changed using

the wheels which are present at two

height levels.

ACAUTION:Make sure that

the rack is empty. Changing

the height setting while the

rack contains tableware

could cause the contents to

dislodge, causing personal

injury or damage to the

tableware.

1. Release the latches on both the

right and left tracks of the upper

rack by turning them to the outside

2. Pull out the rack completely .B

3. Place the rack into the tracks

again at the desired height .C

4. Push the latches back into the

correct position.

4.2 LOWER RACK

Use the lower rack for plates, bowls,

pots etc.

10 USA

COLLAPSABLE LOWER BASKET

WIRES (2 & 4 PIECES)

(MODEL DEPENDING)

The foldable wires (A) located at

the lower basket of the machine are

designed for an easier placement of

large pieces such as pans, bowls,

etc. You can create larger spaces by

folding each wire individually or all

them at once.

To bring the collapsible wires into

horizontal position, grab the wire from

mid position and push them in the

directions of arrows (B) To bring the

wires back to vertical position, just lift

them up. Collapsible wires will click into

the latch again

CNOTICE: Bringing the wires

to the horizontal position

byholding them from the

tips may cause them to

bend. Therefore, it will be

appropriate to bring the wires

in the middle to horizontal or

vertical position by holding

them from their stems and

pishing in the direction of

arrow.

33 44

11 USA

COLLAPSABLE LOWER BASKET

WIRES (2 PIECES)

(MODEL DEPENDING)

The two piece foldable wires located

at the lower basket of the machine are

designed for an easier placement of

large pieces such as pans, bowls, etc.

(1, 2).

You can create larger spaces by

folding each wire individually or all of

them at once. Lay the foldable wires

down by pressing on the latch (A).







CUTLERY BASKET

(MODEL DEPENDING)

12 USA

UPPER RACK CUP HOLDER

(MODEL DEPENDING)

You can use the upper rack cup holder

for your small cups and similar small

glasses. When you don’t use the upper

rack cup holder you can remove it to

create a bigger space. To attach the

upper rack cup holder, place it in the

way shown in (A). Press downwards to

secure it into its seating.

13 USA

4.3 PROPER AND IMPROPER LOADING OF DISHWARE

1: Salad Fork

2: Teaspoon

3: Dinner fork

4: Knife-solid handle

5: Serving spoon

6: Serving fork

Sliding Cutlery

Basket load pattern

for 8 place settings

•Place all large and very dirty items in the lower rack.

•Place all containers such as cups, glasses and pots into the dishwasher with

the opening facing downwards (so that no water can collect).

•The movement of the spray arms must not be hindered.

•Do not overload your dishwasher. Dishes and cutlery should not be placed

above each other. Glasses should not touch.

•Only with suitable dishes (mentioned in section 5) will you obtain optimal

washing results with a sensible use of energy.

incorrect incorrect

14 USA

5. WHAT SHOULD NOT

BE WASHED IN YOUR

DISHWASHER

•Rust-sensitive steel parts like iron

and cast iron that can rust and

stain other utensils and damage

the interior stainless steel liner

of the dishwasher and void the

warranty. Do not wash copper,

brass, pewter, bronze or tin.

•Cutlery with wooden or horn

handles and cutlery with mother-

of-pearl or porcelain handles will

deteriorate over time if put in the

dishwasher.

•Plastics may lose their shape

or color with hot water, please

follow the instructions of plastic

manufacturers. Be sure that plastic

items are marked “dishwasher

safe”.

•Glued dishes or cutlery are not

suitable for machine washing

since certain adhesives may get

soft or dissolve with hot water.

•Aluminum may fade over time.

Minerals in water and detergent

may cause the aluminum to

darken or spot.

•Sterling silver articles should not

be washed in the dishwasher

because they tend to discolor

and become dull by dishwasher

detergent.

•Silverware and stainless steel

items should not be in contact with

each other. Mixing these items can

cause staining. Remove and hand

dry these items immediately when

the program ends.

•Decorated glasses, porcelain, fine

china and china with gold rims

are sensitive to machine washing.

They may lose their patterns and

colors over time.

•Crystal and very fine glassware

may become opaque (etch) losing

their shine over time. You may

prefer to wash them by hand.

•Do not wash sponges or dish

cloths in dishwasher.

•Do not wash art and craft articles

in dishwasher.

•Disposable plastics and

disposable aluminum cannot

withstand high temperatures; do

not wash them in the dishwasher.

ACAUTION :If in doubt,

wash by hand or follow

the instructions from the

manufacturer of utensils,

dishes, glasses or pots and

pans.

Do not wash items soiled

with cigarette ash, candle

wax, varnish, paints or

chemicals since they can

damage your dishwasher.

CNOTICE: We recommend

when buying new dishware,

try to choose ones that are

suitable for machine washing

(marked as dishwasher

safe).

CARING FOR YOUR TABLE-WARE

The combination of high temperatures

and dishwasher detergent may cause

damage to some items if they are

washed in the dishwasher. Remember,

if there is any doubt about any aspect

concerning items to be washed in the

dishwasher, follow the instructions from

the manufacturer of the items, or wash

the items by hand.

15 USA

6. OPERATING THE PRODUCT

1. On/Off key

2. Programme Selection / Programme

Cancel (3 seconds) key

3. Function keys & indicators

4. Programme indicator

5. Salt indicator (MODEL

DEPENDING)

7. Start / Cancel indicator

8. Time Delay / Programme Time

indicator

9. Time Delay key

10. Time Delay indicator

11. End of Programme indicator

12.

13. Rinse Aid indicator

6.1 KEYS

On/Off key

When you press On / Off key, indicator lights illuminate on the display for ON

position. The lights turn off in OFF position.

Programme Selection / Programme Cancel key

Press this key until the desired programme appears in the programme indicator.

To cancel the running programme open the door of the product. Press and hold

the Programme Selection / Programme Cancel keys for 3 seconds. After the 3 -

2 - 1 countdown, 0:01 is displayed, close the door of the product and wait for the

Not in use

Half Load Function

Extra Rinse function

Steam Drying function

Fast Function

NOTICE: If you do not perform any operation after switching on the

machine, it will be automatically switched off within 5 seconds.

Cancel 3”

2 4 5 6 7 8

111213

3 3 9

Not in use

16 USA

draining process complete. Draining

is completed in 2 minutes and the

machine gives an audible warning

when it is completed.

Function keys

If you press any of the Function keys

during programme selection or time

delay selection, an affirmative key

signal will be heard provided that the

relevant function is supported by the

selected programme. Function will be

deemed selected when the indicator of

the selected function is lit.

To cancel the selected function, keep

the function key pressed until the

function indicator disappears.

6.2 PREPARING THE

MACHINE

1. Open the door of the dishwasher.

2. Place the dishes in accordance

with the instructions in the user

manual.

3. Make sure that the upper and lower

impellers rotate freely.

4. Put adequate amount of detergent

into the detergent dispenser.

6.3 PROGRAMME SELECTION

1. Press the On/Off button to turn on

your machine.

2. Check the Salt and Rinse Aid

indicators and add salt and/or rinse

aid if needed.

3. Refer to the table of “Programme

data and average consumption

values” to determine a washing

programme suitable for your

dishes.

4. Selected programme will start

when you close the door of your

machine.

18 USA

Steam Drying function

It provides superior drying

performance.

Extra Rinse function

Depending on the type of the detergent

used, if a detergent dissolving issue is

encountered it will remove the resulting

stains from the dishes and enables the

optimum rinsing performance.

Half Load function

It is used to operate the machine

without loading it completely.

1. Load your dishes in the machine as

you like.

2. Turn the machine on with On/Off

key.

3. Select the desired programme

and press the Half Load key. The

Half Load indicator will light on the

display in the Function Selected

indicator.

4. Close the door of the machine to

start the programme.

CWith the Half Load function

you can save both water and

power while using the lower

and upper baskets of the

machine.

6.4 AUXILIARY FUNCTIONS

Washing programmes of your

dishwasher are designed to obtain the

best cleaning effect, considering the

type of the soiling, soiling degree and

properties of the dishes to be washed.

Auxiliary functions allow you save from

time, water and power.

CAuxiliary functions may

cause changes in the

programme duration.

CAuxiliary functions are not

suitable for all washing

programs. Indicator of the

auxiliary function that is

not compatible with the

programme will not be

active.

Fast Function

It shortens the time of the washing

cycle selected and decreases water

consumption by enabling washing

under higher pressure.

Interior Lighting

(MODEL DEPENDING)

Some models have interior lighting to

illuminate the interior when the door is

opened.

Changing the interior lighting

setting

1. After turning on the machine,

press Time Delay and P+ keys

simultaneously. Continue to press

until the countdown 3, 2, 1 is

completed on the display.

2. Press P+ key to activate the L:

option. The interior lighting is

turned off at "L:0" option and turned

on at "L:1" option. Set the desired

option with the Time Delay key.

3. Turn off the machine with On/Off

key to save the changes.

19 USA

Floor illumination cannot be

cancelled by the user.

Changing Warning Sound Volume

1. After turning on the machine,

press Time Delay and P / P+

keys simultaneously. Keep them

pressed until the countdown 3, 2, 1

is completed on the display.

2. Press P / P+ key to activate the S:

position.

3. Each pressing on the Time Delay

key will change the warning sound

volume as "S:0" off, "S:1" medium"

and "S:2" high.

4. Turn off the machine with On/Off

key to save the changes.

CFactory setting of your

machine is "S:2".

Automatic Detergent Detection

Feature

The product has a feature to

automatically detect the type of the

detergent and adjust the washing

programme and drying system to the

best performance. If special tablet

detergent is used, the programme

duration can be extended by 20

minutes in order to optimize the

washing and drying performance.

CNotice: Automatic detergent

detection feature should be

deactivated during the tests

according to AHAM DW-1.

To deactivate:

1. After turning on the machine,

press Time Delay and P keys

simultaneously. Keep them

pressed until the countdown 3, 2, 1

is completed on the display.

2. Press P key to activate the a:

option. Automatic detergent

detection feature is disabled at

“a:0” option and enabled at "a:1"

option. Set the desired option by

pressing the Time Delay key.

3. Turn off the machine with On/Off

key to save the changes.

Floor illumination

Warning to show that machine is in

washing phase

(MODEL DEPENDING)

Your machine reflects a light to the

floor during the washing process. This

light turns off after the washing process

is complete.

CFloor illumination is activated

automatically when the

washing programme starts

and remains lit until the end

of the programme.

6.5 SCHEDULING THE

WASHING TIME

Time Delay

If an economical electricity tariff is

applied in your region, you can use

the Time Delay function to wash your

dishes during appropriate hours.

You can delay the start of the selected

programme until 24 hours.

1. Press the Time Delay function

key after selecting the washing

programme and other auxiliary

functions.

2. Once you press the Time Delay

key, Display Information Line

will show "0:30" and Time Delay

indicator will start flashing.

3. Set the desired time by pressing

the Time Delay key. Time will

increase with increments of 30

minutes up to 6 hours and after

20 USA

that in 1 hour increments up to 24

hours every time you press the key.

4. Close the door of your machine

after setting the Delayed Start.

Once the delay time is over, the

selected programme will start

automatically.

Changing the settings while Time

Delay function is active

While the Time Delay function is

activated, you cannot make changes

in the washing programme, auxiliary

functions or the duration of delay time.

CProgramme and auxiliary

functions cannot be

set/changed after the

programme has started.

To cancel the Time Delay function

Open the door of the product Press

and hold the Programme Selection

/ Programme Cancel keys for 3

seconds. After the 3 - 2 - 1 countdown,

0:01 is displayed, close the door of

the product and wait for the draining

process complete. Draining is

completed in 2 minutes and the

machine gives an audible warning

when it is completed.

CYou can select and start a

new programme following

the cancellation of Time

Delay function.

CTime Delay function cannot

be set after the programme

starts.

6.6 STARTING THE

PROGRAMME

Close the door of your machine to start

it after selecting the programme and

auxiliary functions.

MODEL DEPENDING:

Your machine performs

water softening depending

on the hardness level of

the supply water. Washing

time can change while

the programme is running

depending on the ambient

temperature where your

machine is installed,

temperature of the supply

water and amount of the

dishes.

CPay attention not to open the

door of the machine when

it is running. There may

be a rush of vapour when

you open the door of your

machine; be careful.

CThe machine will be

switched off if no button is

pressed within 5 seconds

after opening the door while

the machine is running.

CAfter the door has been

opened, if any button is

pressed within 5 seconds

and the door is closed,

the selected programme

resumes; otherwise, the

machine will be switched off.

Open the door after the

machine has been switched

off, press On/Off button

and close the door within 5

seconds. The programme

will resume washing.

21 USA

The machine will remain

silent in pause mode for

some time in order to

remove the water from the

machine and on the dishes

completely and to have the

water softener cleaned, and

then it will resume running in

drying mode.

6.7 CANCELLING THE

PROGRAMME

Open the door of the product Press

and hold the Programme Selection

/ Programme Cancel keys for 3

seconds. After the 3 - 2 - 1 countdown,

0:01 is displayed, close the door of

the product and wait for the draining

process complete. Draining is

completed in 2 minutes and the

machine gives an audible warning

when it is completed.

CThere might be residues

of detergent or rinse aid

in the machine and/or on

the pieces being washed

depending on the step

the programme you have

cancelled was in.

6.8 SALT INDICATOR ( )

(MODEL DEPENDING)

Please check the salt indicator on

the display to see whether there is

adequate amount of softening salt

in the dishwasher or not. You need

to refill the salt reservoir with salt

whenever salt indicator appears on the

display of your machine.

Adjusting the water hardness

level is explained in Water

Softening System section.

6.9 RINSE AID INDICATOR ( )

Please check the rinse aid indicator

on the display to see whether there is

adequate amount of rinse aid in the

dishwasher or not. You need to refill

the rinse aid reservoir with rinse aid

whenever rinse aid indicator appears

on the display of your machine.

6.10 END OF PROGRAMME

CWhen the programme you

have selected comes to an

end, an audible warning

signal will warn you to turn

off your machine. This

audible signal will warn you

with certain intervals before

it turns off.

End of Programme indicator will light

up when the washing programme is

over.

1. Open the door of the machine.

2. Press On/Off key to turn off your

machine.

3. Close the tap.

4. Unplug the machine from the

socket.

CFor energy saving, the

machine is automatically

turned off following

the completion of the

programme or if the

programme is not started.

22 USA

ProCare

This programme is recommended

to be operated on each 1-2 months

for machine cleaning and necessary

hygiene. The programme should be

operated while the machine is empty.

In order to achieve an efficient result, it

is recommended to use together with

special machine cleaning agents.

C Do not use this programme

to clean dishes. As

it operates in high

temperatures, it is harmful

for the dishes.

Leave your dishes in the

machine for about 15

minutes to allow them cool

down after they are washed.

Your dishes will dry in a

shorter time if you leave

the door of your machine

ajar during this period. This

process will increase the

drying effectiveness of your

machine.

6.11 WATER CUT-OFF

WARNING

If mains water is cut or water inlet

tap is turned off the machine cannot

take water in and E:02 icon will flash

on the programme indicator. As long

as the problem continues, washing

programme is paused and the water

inlet is checked regularly by the

machine; when the water is restored

E:02 icon will disappear after a while

and the washing programme resumes.

6.12 OVERFLOWING

WARNING

If the machine intakes too much

water or there is leakage at any of

the components then the machine

will detect this and E:01 icon will flash

on the Programme indicator. As long

as the overflowing continues safety

algorithm will be active and try to

discharge the water. If overflowing

stops and safety is assured, E:01

icon will disappear. If E:01 does not

disappear, there is a permanent fault.

In this case the authorised service

should be contacted.

23 USA

7. DETERGENT & RINSE AID

DISPENSER

7.1 FILLING THE DETERGENT

DISPENSER

AWARNING:Always store

your detergent in locations

which are cool, dry and out

of the reach of children.

•Check that the detergent

dispenser is empty after the

completion of each wash

program.

AWARNING:Dishwasher

detergents can be dangerous

if inhaled or swallowed.

Avoid contact with skin and

eyes, keep children and

infirm persons away from the

dishwasher when the door

is opened. Consult a doctor

immediately if detergent has

been swallowed or inhaled.

•Only use detergents suitable for

dishwashers.

•Do not use detergent in Rinse &

Hold cycle.

•Don’t forget to pour / put the

detergent into the dispenser

before turning the machine on.

•Too much detergent may mean

that the detergent does not

dissolve properly and dishes could

get scratched.

•Too much detergent in soft water

may cause glass corrosion. Do

not use too much detergent if your

water supply is soft.



If you do not know the hardness

of your water supply, use 15 ml / 3

tsp detergent. Increase the amount

of detergent if you see white water

marks especially on the surface of the

glassware.

Find out the hardness of your water

supply by asking your local water

department, water softener company,

or county extension agent.









1. Open the detergent container by

pushing the lock to the right .A

2. Pour / put the detergent into the

dispenser.

3. Close the lid until it clicks in.The

detergent container holds a total

of 40 ml / 8 tsp of detergent

1.Marking lines on the inside of

the detergent container aid in

providing the correct amount of

detergent. When the dishwasher

is fully loaded and the dishes are

very dirty, we recommend filling

the detergent container up to

24 USA

7.2 FILLING RINSE AID

DISPENSER

WARNING:Keep your

rinse aids out of the reach

of children. Ingestion or

inhalation of rinse aid may

cause serious injury. Avoid

contact with skin and eyes,

and keep children and infirm

persons away from rinse

aids.

•Only use rinse aids suited for use

in dishwashers. Rinse aids allow

washing water to rinse off more

cleanly and prevent watermarks or

streaks on the dishes.

•If you use “2 in 1” or “3 in 1”

detergents / tabs, you do not

need additional rinse aid.



1. Open the rinse aid dispenser by

pressing the lock .B

2. Carefully pour in rinse aid to the

MAX mark.

the 25 ml / 5 tsp mark. When the

dishes are less dirty, it is generally

sufficient to fill the detergent up to

the 15 ml / 3 tsp mark.







 





•The detergent amounts for the

individual cleaning programs are

shown in the “Quick Reference

Guide - Program Table”.

•Fill amounts given are for standard

powder detergent. Amounts

may vary if you use liquid or

concentrated powder detergent.

Tablet detergents should be

placed in detergent container . 1

With the cover closed.

•Follow instructions on the package

of the detergent when using

liquid dishwasher detergent,

concentrated powder detergent, or

tablet detergent.

•Deviations are possible depending

on how dirty the dishes are and

how hard the water is in your

location.

•If your dishes have been in the

dishwasher for some time without

being washed, also fill the smaller

container . up to the top.2

25 USA







3. Close the lid until it clicks in .3

4. Carefully wipe off spilled rinse aid.

Excessive rinse aid causes excessive

foam formation, which may hinder

cleaning.

7.3 SET THE DOSE OF RINSE AID

The dose of rinse aid to be used can be

set by means of the dispenser regulator 4

between levels 1 and 6.

Change the setting, only if the following

applies after washing:

•Watermarks are visible on the dishes:

Set dosage higher.

•Streaks are visible on the dishes: Set

dosage lower.

26 USA

To Adjust the Water Hardness

1. After turning on the machine, press Time Delay and P+/P keys simultaneously.

After the countdown (3,2,1) is displayed keep the keys pressed for a while.

2. Press P+/P key to activate the position.

3. Using Time Delay key, adjust water hardness level according to the hardness of

the supply water. See “Water hardness level adjustment table” for correct setting.

4. Press On / Off key to save the setting.

Water Hardness Level Adjustment Table

Hardness

Level

English

Water

Hardness

°dE

German

Water

Hardness

°dH

French

Water

Hardness

°dF*

Water Hardness Level Indicator

1st

Level 0-5 0-4 0-8

Press the Time Delay key to switch the water hardness level to position 1. (r 1)

2nd Level 6-9 5-7 9-13

3rd

Level

10-15 8-12 14-22 Press the Time Delay key to switch the water hardness level to position 2. (r 2)

4th

Level

16-19 13-15 23-27 Press the Time Delay key to switch the water hardness level to position 3. (r 3)

5th

Level

20-24 16-19 28-34 Press the Time Delay key to switch the water hardness level to position 4. (r 4)

6th

Level

25-62 20-50 35-90 Press the Time Delay key to switch the water hardness level to position 5. (r 5)

WATER HARDNESS & REGENERATION SETTINGS

The dishwasher requires lime free water. Hard water leaves watermarks on your

dishes. Your dishwasher has a special water softening system to remove the

hardness of the tap water. Setting this system correctly will increase the washing

effectiveness.

To find out the hardness level of water in your area, contact your local Water

Board or Determine water hardness level by the help of test strip provided.

If you move to a different location, the level of water hardness will possibly

be different. It is essential to reset the water hardness in order to obtain

optimum washing efficiency.

Test Strip

Let the water

flow from your

tap for 1 minute.

Remove the

test strip from

its packing.

Fill a glass with

tap water and

dip the test strip

into water for 1

second.

Take the test strip

out of the water and

shake it.

Hold for

1 minute.

Set the water hardness level of your dishwasher

according to the result shown by the test strip.











 

No Lime

Very low lime content

Low lime content

Medium lime content

High lime content

Very High lime content

Level 1

Level 2

Level 3

Level 4

Level 5

Level 6

8. SETTING THE WATER SOFTENER

(MODEL DEPENDING)

27 USA

If the hardness level of the water

that you use is above 90°dF (French

standard for water hardness) or if

you are using well water, than it is

recommended to use filter and water

purification devices.

* If the hardness level of the water

that you use is below 8°dF (French

standard for water hardness),

there is no need to use salt in your

dishwasher. If this is the case,

Salt Indicator (if any) illuminates

continuously on the panel of your

machine.

If the water hardness is set to level

1, the Salt Indicator will illuminate

continuously although it is not

necessary to use salt. If you use

salt under this condition, salt will not

be consumed and the lamp will not

illuminate.

CIf you move your house, it

is very important to make

the water hardness level

adjustment of your machine

according to the new

location you move in order

to preserve the washing

efficiency.

If the water hardness

level of your machine is

adjusted previously, your

machine will display the

most recent hardness level

adjustment. Adjust the new

water hardness level of the

machine based on the water

hardness level of the tap

water.

9. FILLING THE DISHWASHER

SALT DISPENSER

(MODEL DEPENDING)

CAUTION :Never use

culinary or table salt. These

types of salt do not dissolve

in water easily and will

damage the function of the

softening device.

CNOTICE: Only use special

dishwasher salt in your

machine to soften the water.

Do not use coarse grained

salt. Small grains or

powdered salt is more easily

soluble.

The manufacturer is not

liable for damages resulting

from the use of the wrong

type of salt.

1. Remove the lower rack from the

machine.



28 USA

2. Open the screw-in cap of the salt

container by turning it counter

clockwise (Fig. , ).A B

3. When operating for the first time:

Pour 1 Liter of water into the salt

container (Fig. ).C



4. Pour the salt into the container

with the aid of the supplied salt

funnel (Fig. ). Pour in enough D

salt to fill the container. The

container holds approximately 2 kg

/ 4.4 pounds.

5. Close the cap tightly.

ACAUTION :Begin any wash

program immediately after

filling the salt container. The

washing program prevents

damage to the machine

which may be caused by any

spilled salt solution.

After the first washing cycle, the salt

level indicator light will go out. (model

depending)

10. CARE AND MAINTENANCE

WARNING:Before cleaning

or carrying out maintenance,

switch off the appliance,

disconnect the mains plug

and turn off the water tap.

AWARNING:Do not repair

or replace any part of the

dishwasher or attempt any

servicing unless specifically

recommended by this

manual. We recommend

that the dishwasher only be

repaired by an authorized

service agent.

ACAUTION :To avoid the

possibility of slipping,

keep the floor around the

dishwasher clean and dry.

Keep your appliance free

from the accumulation of

combustible materials, such

as lint, rags, and chemicals.

If the dishwasher is not in

use for an extended period

of time, we recommend you

check that the baskets are

empty, leave the inside of the

dishwasher clean, the door

cracked open to allow air to

circulate, turn off both the

power and water supply to

the dishwasher.

29 USA

10.1 CARING FOR YOUR

DISHWASHER EXTERIOR

CAUTION :Possible

dishwasher damage:

Abrasive cleaners, scouring

pads, abrasive cloths (paper

towels) can damage the

dishwasher decorative door.

Cleaning the control panel: Use only

soft cloth that is lightly dampened with

mild detergent. Clean the control panel

only with a moist cloth and clear water.

Cleaning the colored doors: Use only

soft cloth that is lightly dampened with

mild detergent.

Cleaning the stainless steel doors:

Use a soft cloth with a cleaner made

for cleaning stainless steel. For the

best results, apply the stainless steel

cleaner to a soft cloth and wipe the

surface in the direction of the grain.

Cleaning the door gasket: Regularly

clean the door gasket with a damp

cloth to remove food particles and

other debris. Use a gentle household

cleaner for the outside and the door

seals, and rinse thoroughly.

10.2 CARING FOR YOUR

DISHWASHER INTERIOR

NOTICE: Cleaning your

dishwasher at regular

intervals ensures longer

product life and reduces the

risk of recurring problems.

Always disconnect the power

to machine before cleaning.

ACAUTION :When cleaning

the underside of the main

filter, care must be taken on

the sharp outer edge to avoid

the risk of cut type injuries.

31 USA

10.4 CLEANING THE HOSE

FILTER

Damages on the machine that may be

caused by impurities coming from the

urban supply water or your own water

installation (such as sand, dirt, rust,

etc.) can be prevented by means of the

filter attached to the water inlet hose.

Check the filter and the hose regularly

and clean them if necessary.

1. Turn off the tap and remove the

hose.

2. After taking out the filter, clean it

under running tap water.

3. Place the cleaned filter back to its

seat in the hose.

4. Install the hose to tap.

(MODEL DEPENDING)

10.5 CLEANING THE

IMPELLERS

Clean the impellers at least once a

week in order for the machine operates

efficiently.

LOWER IMPELLER

Check if the holes on the lower impeller

(1) are clogged. If they are clogged,

remove and clean the impeller. Pull the

lower impeller up to remove it (A, B).









32 USA

UPPER IMPELLER

Check if the holes on the upper

impeller (1) are clogged. If they

are clogged, remove and clean the

impeller. Turn its nut to left to remove

the upper impeller (A, B).

Make sure that the nut is tightened well

when installing the upper impeller.









33 USA

11. TROUBLESHOOTING

Machine does not start.

•Power cable is unplugged. >>> Check if the power cable is plugged in.

•Fuse is blown. >>> Check the fuses in your house.

•Water is cut. >>> Make sure that the water inlet tap is open.

•Door of the machine is open. >>> Make sure that you have closed the door of

the machine.

•On / Off button is not pressed. >>> Make sure that you have turned on the

machine by pressing the On / Off button.

Dishes are not washed clean

•Dishes are not placed orderly in the machine. >>> Load the dishes as

described in the user manual.

•Selected programme is unsuitable. >>> Select a programme with a higher

temperature and cycle time.

•Impellers are stuck. >>> Prior to starting the programme, turn the lower and

upper impellers by hand to make sure that they rotate freely.

•Impeller holes are clogged. >>> Lower and upper impeller holes might be

clogged with food remnants such as lemon pips. Clean the impellers regularly

as illustrated in section “Cleaning and Care”.

•Filters are clogged. >>> Check if the filter system is clean. Clean the filter

system regularly as illustrated in section “Cleaning and Care”.

•Filters are installed incorrectly. >>> Check the filter system and make sure

that it is installed correctly.

•Baskets are overloaded. >>> Do not overload the baskets in excess of their

capacity.

•Detergent is stored under unsuitable conditions. >>> If you are using powder

detergent, do not store the detergent package in humid places. Keep it in a

closed container if possible. For ease-of-storing, we recommend you to use

tablet detergents.

•Detergent is not sufficient. >>> If you are using powder detergent, adjust

the amount of detergent according to the soiling degree of your dishes and/

or programme definitions. We recommend you to use tablet detergents for

optimum results.

•Rinse aid is not sufficient. >>> Check the rinse aid indicator and add rinse

aid if necessary. Increase the rinse aid setting if there is enough amount of

rinse aid in the machine.

•Detergent dispenser lid is left open. >>> Make sure that the detergent

dispenser lid is closed tightly after adding detergent.

Dishes are not dry at the end of cycle

•Dishes are not placed orderly in the machine. >>> Place your dishes in a way

that no water will accumulate in them.

•Rinse aid is not sufficient. >>> Check the rinse aid indicator and add rinse

aid if necessary. Increase the rinse aid setting if there is enough amount of

rinse aid in the machine.

•Machine is unloaded right after the programme is over. >>> Do not unload

your machine right after washing process is completed. Slightly open the

Produkt Specifikationer

Mærke:	Blomberg
Kategori:	Opvaskemaskine
Model:	DWS55100SS

Har du brug for hjælp?

Hvis du har brug for hjælp til Blomberg DWS55100SS stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Opvaskemaskine Blomberg Manualer

Blomberg DW 36141 NBL00 Manual

12 Januar 2025

Blomberg DWT 36211 NBL00 Manual

2 Oktober 2024

Blomberg DWT81800SS Manual

2 Oktober 2024

Blomberg LDFN2240B Manual

1 September 2024

Blomberg LDV63540 Manual

30 August 2024

Blomberg LDF52320W Manual

30 August 2024

Blomberg LDV42320 Manual

30 August 2024

Blomberg LDF52320G Manual

30 August 2024

Blomberg DWS 51502 SS Manual

29 August 2024

Blomberg DWT 36241 NBL00 Manual

25 August 2024

Opvaskemaskine Manualer

Nyeste Opvaskemaskine Manualer

Sharp QW-I1GI47EX Manual

9 April 2025

Hotpoint HA6FA14BN7A0X Manual

8 April 2025

Asko DFI544BXXL Manual

7 April 2025

Asko DFI534A Manual

7 April 2025

Asko DFI545V Manual

7 April 2025

Asko DFI545N Manual

7 April 2025

Arçelik AB 252 Manual

6 April 2025

Arçelik 6466 Manual

6 April 2025

Arçelik 6667 WF I Manual

6 April 2025

Etna VW938CR Manual

6 April 2025