Blomberg LWF27441 Manual


Læs nedenfor 📖 manual på dansk for Blomberg LWF27441 (48 sider) i kategorien Vaskemaskine. Denne guide var nyttig for 30 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/48
LWF27441W
Washing Machine
User manual
Please read this user manual first!
Dear Customer,
Thank you for preferring a Beko product. We hope that you get the best results from your
product which has been manufactured with high quality and state-of-the-art technology.
Therefore, please read this entire user manual and all other accompanying documents
carefully before using the product and keep it as a reference for future use. If you hand
over the product to someone else, give this user manual as well. Follow all warnings and
information in the user manual.
Remember that this user manual is also applicable for several other models. Differences
between models will be identified in the manual.
Explanaton of symbols
Throughout this user manual the following symbols are used:
C
Important information or useful hints
about usage.
A
Warning for hazardous situations with
regard to life and property.
B
Warning for electric shock.
Recyclable materials.
Do not dispose of the packaging materials together with domestic or other wastes. Take
them to the packaging material collection points designated by the local authorities.
3 / EN Washing Machine /User’s Manual
1 General safety instructions 5
1.1 Life and property safety ---------------------------------------------------------------------------5
1.2 Children's safety -----------------------------------------------------------------------------------6
1.3 Electrical safety ------------------------------------------------------------------------------------7
1.4 Hot surface safety ---------------------------------------------------------------------------------7
2 Important instructions for the environment 8
2.1 Compliance with WEEE Directive ------------------------------------------------------------------8
2.2 Package information ------------------------------------------------------------------------------8
3 Intended use 8
4 Your product 9
4.1 Overview -------------------------------------------------------------------------------------------9
4.2 Package Contents ---------------------------------------------------------------------------------10
4.3 Technical specifications ---------------------------------------------------------------------------11
4.4 Installation ----------------------------------------------------------------------------------------- 12
4.4.1 Approprate nstallaton locaton ------------------------------------------------------------------------12
4.4.2 Removng packagng renforcement --------------------------------------------------------------------13
4.4.3 Removng the transportaton locks ---------------------------------------------------------------------13
4.4.4 Connectng the water supply ----------------------------------------------------------------------------14
4.4.5 Connectng the dran hose to the dran -----------------------------------------------------------------15
4.4.6 Adjustng the feet ----------------------------------------------------------------------------------------16
4.4.7 Electrcal connecton -------------------------------------------------------------------------------------16
4.4.8 Intal use -------------------------------------------------------------------------------------------------17
4.5 Preparation ----------------------------------------------------------------------------------------18
4.5.1 Sortng the laundry ---------------------------------------------------------------------------------------18
4.5.2 Preparng laundry for washng ---------------------------------------------------------------------------19
4.5.3 Thngs to be done for energy savng --------------------------------------------------------------------19
4.5.4 Loadng the laundry --------------------------------------------------------------------------------------20
4.5.5 Correct load capacty -------------------------------------------------------------------------------------20
4.5.6 Usng detergent and softener ---------------------------------------------------------------------------20
4.5.7 Tps for effcent washng --------------------------------------------------------------------------------23
TABLE OF CONTENTS
4 / EN Washing Machine /User’s Manual
4.6 Operating the product ----------------------------------------------------------------------------24
4.6.1 Control panel ----------------------------------------------------------------------------------------------24
4.6.2 Programme and consumpton table ---------------------------------------------------------------------25
4.6.3 Programme selecton ------------------------------------------------------------------------------------27
4.6.4 Programmes ---------------------------------------------------------------------------------------------27
4.6.5 Temperature selecton -----------------------------------------------------------------------------------29
4.6.6 Spn speed selecton -------------------------------------------------------------------------------------29
4.6.7 Auxlary functon selecton ------------------------------------------------------------------------------30
4.6.8 End Tme --------------------------------------------------------------------------------------------------31
4.6.9 Startng the programme ---------------------------------------------------------------------------------32
4.6.10 Loadng door lock ---------------------------------------------------------------------------------------32
4.6.11 Changng the selectons after programme has started -----------------------------------------------32
4.6.12 Chld Lock ------------------------------------------------------------------------------------------------33
4.6.13 Cancellng the programme ------------------------------------------------------------------------------33
4.6.14 End of programme --------------------------------------------------------------------------------------33
4.6.15 Energy savng mode ------------------------------------------------------------------------------------33
4.7 Maintenance and cleaning ------------------------------------------------------------------------34
4.7.1 Cleanng the detergent drawer --------------------------------------------------------------------------34
4.7.2 Cleanng the loadng door and the drum ----------------------------------------------------------------34
4.7.3 Cleanng the body and control panel --------------------------------------------------------------------35
4.7.4 Cleanng the water ntake flters ------------------------------------------------------------------------35
4.7.5 Dranng remanng water and cleanng the pump flter ------------------------------------------------36
5 Troubleshooting 38
TABLE OF CONTENTS
5 / EN Washing Machine /User’s Manual
1
General safety instructions
This section includes security instructions which may help prevent
the injuries and material damage risks. All kinds of warranties shall
be invalid if these instructions are not observed.
1.1 Life and property safety
u
Never place the product on a carpet-covered floor. Electrcal parts
wll get overheated snce ar cannot crculate from under the devce.
Ths wll cause problems wth your product.
u
Unplug the product f t s not n use.
u
Always have the reparng procedures carred out by an Authorsed
Servce Agent. The manufacturer shall not be held lable for damages
that may arse from procedures carred out by unauthorsed persons.
u
The water supply and dranng hoses must be securely fastened and
reman undamaged. Otherwse a water leak may occur.
u
Whle there s water nsde the product, never open the loadng door
or remove the flter. Otherwse, rsk of floodng and njury from hot
water wll occur.
u
Do not force open the locked loadng door. The door can be opened
a few mnutes after the washng cycle ends. In the case of forcng
the loadng door to open, the door and the lock mechansm may get
damaged.
u
Use detergents, softeners and supplements sutable for automatc
washng machnes only.
u
Follow the nstructons on the label of textles and the detergent
package.
6 / EN Washing Machine /User’s Manual
1.2 Children's safety
u
This product can be used by children who are at the age of 8 and over
and the people whose physical, sensory or mental skills are not fully
developed or who do not have necessary required experience and
knowledge as long as they are supervised or trained about the safe
use of the product and its risks. Children should not play with the
device. Cleaning and maintenance works should not be performed
by children unless they are supervised by someone. Children of less
than 3 years should be kept away unless continuously supervised.
u
Packaging materials may be dangerous for children. Keep packaging
materials in a safe place away from reach of children.
u
Electrical products are dangerous for children. Keep children away
from the product when it is in use. Do not allow them to play with the
product. Use the child lock to prevent children from interfering with
the product.
u
Do not forget to close the loading door when leaving the room where
the product is located.
u
Store all detergents and additives in a safe place away from the
reach of children and close the cover of the detergent container or
seal the detergent package.
7 / EN Washing Machine /User’s Manual
1.3 Electrical safety
u
If the product has a falure, t should not be operated unless t s
repared by an Authorsed Servce Agent. Rsk of electrc shock!
u
Ths product s desgned to resume operatng n the event of
powerng on after a power nterrupton. If you wsh to cancel the
programme, see "Cancellng the programme" secton.
u
Plug the product nto a grounded outlet protected by a 13 A fuse. Do
not neglect to have the groundng nstallaton made by a qualfed
electrcan. Our company shall not be lable for any damages that
wll arse when the product s used wthout groundng n accordance
wth the local regulatons.
u
Do not wash the product by sprayng or pourng water onto t! Rsk of
electrc shock!
u
Never touch the power cable plug wth wet hands! Do not grab the
power cord to unplug the machne, always unplug t by holdng the
socket wth one hand, and pullng the plug wth the other hand.
u
Product should be unplugged durng nstallaton, mantenance,
cleanng and repar procedures.
u
If the power cable s damaged, t must be replaced by the
manufacturer, after sales servce or a smlarly qualfed person
(preferably an electrcan) or someone desgnated by the mporter n
order to avod possble rsks.
1.4 Hot surface safety
While washing the laundry at high
temperatures, the loading door glass will
get hot. Considering this fact, during the
washing operation keep children away
from the loading door of the product to
prevent them touching it.
8 / EN Washing Machine /User’s Manual
3
Intended use
• Thisproducthasbeendesignedfordomesticuse.Itisnotforcommercialpurposesorit
should not be used other than its intended use.
• Theproductmustonlybeusedforwashingandrinsingoflaundrythataremarked
accordingly.
• Themanufacturerwaivesanyresponsibilityarisingfromincorrectusageor
transportation.
• Theservicelifeofyourproductis10years.Duringthisperiod,originalsparepartswillbe
available to operate the appliance properly.
2
Important instructions for the environment
2.1 Compliance with WEEE Directive
This product complies with EU WEEE Directive (2012/19/EU). This product
bears a classification symbol for waste electrical and electronic equipment
(WEEE).
This product has been manufactured with high quality parts and materials
which can be reused and are suitable for recycling. Do not dispose of the
waste product with normal domestic and other wastes at the end of its service
life. Take it to the collection center for the recycling of electrical and electronic
equipment. Please consult your local authorities to learn about these collection centres.
Compliance with RoHS Directive:
The product you have purchased complies with EU RoHS Directive (2011/65/EU). It does
not contain harmful and prohibited materials specified in the Directive.
2.2 Package information
Packaging materials of the product are manufactured from recyclable materials in
accordance with our National Environment Regulations. Do not dispose of the packaging
materials together with the domestic or other wastes. Take them to the packaging
material collection points designated by the local authorities.
9 / EN Washing Machine /User’s Manual
4
Your product
4.1 Overview
1
2
3
4
5
6
7
8
1- Power cable
2- Top panel
3- Control panel
4- Drain hose
5- Loading door
6- Filter cap
7- Adjustable feet
8- Detergent drawer
10 / EN Washing Machine /User’s Manual
4.2 Package Contents
9
10
11 12
ab c
13
14
15
16
9- Power cable
10- Drain hose
11- Transportation safety bolts*
12- Mains water inlet hose (One of the following filter types is used for the mains hose
connection.)
a- Electronic water shut-off
b- Mechanical water shut-off
c- Standard
13- Liquid detergent container**
14- User Manual
15- Blind plug***
16- Plastic plug group
* Number of transportation safety bolts may change depending on the model of your product.
** This may be supplied with the machine depending on the model of your product.
*** It will be supplied if your product has double water inlet.
C
Figures in this manual are schematic and may not match the product exactly.
11 / EN Washing Machine /User’s Manual
4.3 Technical specifications
Complying Commission Delegated Regulation (EU) No 1061/2010
Supplier name or trademark Blomberg
Model name LWF27441W
Rated capacity (kg) 7
Energy efficiency class / Scale from A+++ (Highest Efficiency) to D (Lowest Efficiency) A+++
Annual Energy Consumption (kWh) (1) 169
Energy consumption of the standard 60°C cotton programme at full load (kWh) 0.968
Energy consumption of the standard 60°C cotton programme at partial load (kWh) 0.590
Energy consumption of the standard 40°C cotton programme at partial load (kWh) 0.590
Power consumption in off-mode’ (W) 0.500
Power consumption in left-on mode’ (W) 0.500
Annual Water Consumption (l) (2) 9020
Spin-drying efficiency class / Scale from A (Highest Efficiency) to G (Lowest Efficiency) B
Maximum spin speed (rpm) 1400
Remaining moisture Content (%) 53
Standard cotton programme (3) Cotton Eco 60°C and 40°C
Programme time of the standard 60°C cotton programme at full load (min) 208
Programme time of the standard 60°C cotton programme at partial load (min) 183
Programme time of the standard 40°C cotton programme at partial load (min) 183
Duration of the left-on mode (min) N/A
Airborne acoustical noise emissions washing/spinning (dB) 54/75
Built-in No
Height (cm) 84
Width (cm) 60
Depth (cm) 50
Net weight (±4 kg.) 71
Single Water inlet / Double Water inlet • / -
• Available
Electrical input (V/Hz) 230 V / 50Hz
Total current (A) 10
Total power (W) 2200
Main model code 1010
(1)
Energy Consumption based on 220 standard washing cycles for cotton programmes at 60°C and 40°C at full and partial load, and the consumption
of the low-power modes. Actual energy consumption will depend on how the appliance is used.
(2)
Water consumption based on 220 standard washing cycles for cotton programmes at 60°C and 40°C at full and partial load. Actual water
consumption will depend on how the appliance is used.
(3)
“Standard 60°C cotton programme” and the “standard 40°C cotton programme” are the standard washing programmes to which the information
in the label and the fiche relates and these programmes are suitable to clean normally soiled cotton laundry and that they are the most efficient
programmes in terms of combined energy and water consumption.
Technical specifications may be changed without prior notice to improve the quality of the product.
13 / EN Washing Machine /User’s Manual
4.4.2 Removing packaging reinforcement
Tilt the machine backwards to remove the packaging
reinforcement. Remove the packaging reinforcement that is
attached to the ribbon. Do not attempt this operation alone,
get help.
4.4.3 Removing the transportation locks
1 Loose all bolts with an appropriate wrench until they turn freely.
2 Remove the transport safety bolts by rocking them slightly.
3 Insert the plastic covers from the bag containing the user manual into the openings on
the rear panel.
ACAUTION:
Remove the transportation safety bolts before operating the washing
machine! Otherwise, the product will be damaged.
C
Keep the transportation safety bolts in a safe place to reuse when the washing machine
needs to be moved again in the future.
Install the transport safety bolts in the reverse order of the disassembly procedure.
Never move the product without the transportation safety bolts properly fixed in place!
14 / EN Washing Machine /User’s Manual
4.4.4 Connecting the water supply
C
Thewatersupplypressurerequiredtoruntheproductisbetween1to10bars(0.1–1MPa).
Itisnecessarytohave10–80litresofwaterflowingfromthefullyopentapinoneminute
to have your machine run smoothly. Attach a pressure reducing valve if the water pressure is
higher.
A
CAUTION:
Models with a single water inlet should not be connected to the hot water tap.
In such a case the laundry will get damaged or the product will switch to protection mode and
will not operate.
CAUTION:
Do not use old or used water inlet hoses on the new product. It may cause
stains on your laundry.
A
If you are going to use the double water-inlet product as a single (cold) water-inlet unit,
you must install the supplied stopper to the hot water valve before operating the product.
(Appliesfortheproductssuppliedwithtwin–inletvalvesonly.)
Connect the special water supply hoses supplied with the product to the
waterinletsontheproduct.Redhose(left)(max.90ºC)isforhotwater
inlet,bluehose(right)(max.25ºC)isforcoldwaterinlet.
Make sure that the hot and cold water taps are connected correctly when
the product is being installed. Otherwise, your laundry will come out hot at
the end of the washing process and may be damaged.
1 Tighten the nuts of the hose by hand. Never use a tool when tightening the nuts.
2 When hose connection is completed, check whether there are no leak problems at the
connection points by opening the taps fully. If any leaks occur, turn off the tap and
remove the nut. Retighten the nut carefully after checking the seal. In order to prevent
the water leaks and resultant damages, keep the taps closed when you do not use the
product.
15 / EN Washing Machine /User’s Manual
4.4.5 Connecting the drain hose to the drain
• Attachtheendofthedrainhosedirectlytothewastewaterdrain,lavatoryorbathtub.
A
CAUTION:
Your drain house will be flooded if the hose comes out of its housing during
water discharge. Moreover, there is risk of scalding due to high washing temperatures! In
order to prevent such situations and make sure that the machine performs water intake and
discharge processes without any problem, fix the drain hose securely.
• Connectthedrainhosetoaminimumheightof40cmandamaximumheightof100cm.
• Incasethedrainhoseiselevatedafterlayingitonthefloorlevelorclosetotheground
(less than 40 cm above the ground), water discharge becomes more difficult and the
laundry may come out excessively wet. Therefore, follow the heights described in the
figure.
40 cm
100 cm
• Topreventthewastewatergoingbackintothemachineagainandtoensureeasy
drainage, do not immerse the end of the hose into the waste water or do not insert it
into the drain for more than 15 cm. If it is too long, cut it short.
• Theendofthehoseshouldnotbebent,itshouldnotbesteppedonandthehosemust
not be pinched between the drain and the machine.
• Ifthelengthofthehoseistooshort,addanoriginalextensionhose.Lengthofthehose
may not be longer than 3.2 m. To avoid water leak failures, the connection between
the extension hose and the drain hose of the product must be fitted well with an
appropriate clamp as not to come off and/or leak.
16 / EN Washing Machine /User’s Manual
4.4.6 Adjusting the feet
A
CAUTION:
In order to ensure that the product operates more silently and vibration-
free, it must stand level and balanced on its feet. Balance the machine by adjusting the feet.
Otherwise, the product may move from its place and cause crushing and vibration problems.
CAUTION:
Do not use any tools to loosen the lock nuts. Otherwise, they will get
damaged.
1 Loosen the lock nuts on the feet by hand.
2 Adjust the feet until the product stands in a stable and balanced way.
3. Tighten all lock nuts by hand again.
4.4.7 Electrical connection
Connect the product to a grounded outlet protected by a 13 A fuse. Our company shall not
be liable for any damages that will arise when the product is used without grounding in
accordance with the local regulations.
• Connectionmustcomplywithnationalregulations.
• Powercableplugmustbewithineasyreachafterinstallation.
• Ifthecurrentvalueofthefuseorbreakerinthehouseislessthan13Amps,havea
qualified electrician install a 13 Amp fuse.
• Thevoltagespecifiedinthe“Technicalspecifications”sectionmustbeequaltoyour
mains voltage.
• Donotmakeconnectionsviaextensioncablesormulti-plugs.
BWARNING:
Damaged power cables must be replaced by Authorised Service Agents.
Electrical requirements
Before you insert the plug into the wall socket make sure that the voltage and the
frequency shown in the rating label corresponds to your electricity supply.
We recommend that this appliance be connected to the mains supply via a suitable
switched and fused socket in a readily accessible position.
Should the mains lead of the appliance become damaged or need replacing at any time, it
must be replaced by a special purpose made mains lead which can only be obtained from
an Authorised Service Agent.
BWARNING:
This appliance must be earthed
If the fitted moulded plug is not suitable for your socket, then the plug should be cut off
and an appropriate plug fitted.
Destroy the old plug, a cut off plug with a bare cord could cause a shock hazard if inserted
into a socket elsewhere in the house.
17 / EN Washing Machine /User’s Manual
The moulded plug on this appliance incorporates a 13A fuse. Should the fuse need to be
replaced an ASTA approved BS1362 fuse of the same rating must be used. Do not forget to
refit the fuse cover. In the event of losing the fuse cover, the plug must not be used until a
replacement fuse cover has been fitted. Colour of the replacement fuse cover must be the
same colour as that visible on the pin face of the plug. Fuse covers are available from any
good electrical store.
Important
Fitting a different plug
As the colours of the wires in the mains lead of this
appliance may not correspond with the coloured markings
identifying the terminals on your plug, proceed as follows:
1 Connect the green - yellow or green (earth) wire to the
terminal in the plug marked ‘E’ or with the symbol or
coloured green and yellow or green.
2 Connect the blue (neutral) wire to the terminal in the
plug marked ‘N’ or coloured black.
3 Connect the brown (live) wire to the terminal in the plug
marked ‘L’ or coloured red.
With the alternative plugs a 13A fuse must be fitted either
in the plug or adaptor or in the main fuse box. If in doubt
contact a qualified electrician.
Transportation of the product
1. Unplug the product before transporting it.
2. Remove water drain and water supply connections.
3. Drain all water that has remained in the product.
4. Install transportation safety bolts in the reverse order of removal procedure.
C
Never move the product without the transportation safety bolts properly fixed in place!
AWARNING:
Packaging materials are dangerous to children. Keep packaging materials in
a safe place away from reach of the children.
4.4.8 Initial use
Before starting to use the product make sure that the
preparationsaremadewhichareinlinewiththe“Important
SafetyandEnvironmentInstructions”andtheinstructionsin
the“Installation”section.
To prepare the product for washing laundry, first perform
a Drum Cleaning programme. If this is not available in your
machine, apply the method which is described in the section
4.7.2.
C
Use an anti-limescale suitable for the washing machines.
Some water might have remained in the product due to the quality control processes in
production. It is not harmful for the product.
18 / EN Washing Machine /User’s Manual
4.5 Preparation
4.5.1 Sortng the laundry
* Sort laundry according to type of fabric, colour, and degree of soiling and allowable
water temperature.
* Always obey the instructions given on the garment tags.
LAUNDRY WASH SYMBOLS
Symbols for
washing on
machine
Normal wash
No Iron
Sensitive-
Delicate
wash
Hand wash
Not washable
No Spin
WASH Water
temperatures
Maximum 950C 700C 600C 500C 400C 300C
Symbol(s) l l l
l l l
l l l
l l
l l
l l
l l l l l l
Drying
symbols Suitable for
dryer No ironing Sensitive /
delicate dry
Do not dry
with dryer
Do not dry Do not
dry-
clean
DRYING
Drying settings
At any temperature
At high temperature
At medium
temperature
At low temperature
Without heating
Hang to dry
Lay to dry
Hang wet to dry
Lay in shadow
to dry
Dry-cleanable
Iron
IRON Dry or steam
Iron at high
temperature
Iron at medium
temperature
Iron at low
temperature
No ironing
Iron without
steam
Maximum temperature 200 0C 150 0C 110 0C
All bleaches are allowed
Bleach (sodium
hypochlorite)
can be used
Bleach is not
allowed
Only bleaches without
chlorine are allowed
BLEACH
19 / EN Washing Machine /User’s Manual
4.5.2 Preparing laundry for washing
• Laundryitemswithmetalattachmentssuchas,underwiring,beltbucklesormetal
buttons will damage the product. Remove the metal pieces or wash the clothes by
putting them in a laundry bag or pillow case.
• Takeoutallsubstancesinthepocketssuchascoins,pensandpaperclips,andturn
pockets inside out and brush. Such objects may damage the product especially the glass
door or cause noise problem.
• Putsmallsizeclothessuchasinfant'ssocksandnylonstockingsinalaundrybagor
pillow case.
• Placecurtainsinwithoutcompressingthem.Removecurtainattachmentitems.
• Fastenzippers,sewloosebuttonsandmendripsandtears.
• Wash“Machinewashable”or“Handwashable”labelledproductsonlywithan
appropriate programme.
• Donotwashcoloursandwhitestogether.New,darkcolouredcottonsreleasealotof
dye. Wash them separately.
• Toughstainsmustbetreatedproperlybeforewashing.Ifunsure,checkwithadry
cleaner.
• Onlyusethedyes/colourchangersanddescalingagentswhichareappropriateto
machine wash. Always follow the instructions on the package.
• Washtrousersanddelicatelaundryturnedinsideout.
• KeeplaundryitemsmadeofAngorawoolinthefreezerforafewhoursbeforewashing.
This will reduce pilling.
• Laundrythataresubjectedtomaterialssuchasflour,limedust,milkpowder,etc.
intensely must be shaken off before placing into the product. Such dusts and powders
on the laundry may build up on the inner parts of the product in time and can cause
damage.
4.5.3 Things to be done for energy saving
Following information will help you use the product in an ecological and energy-efficient
manner.
• Operatetheproductinthehighestloadcapacityallowedfortheprogrammeyouhave
selected, but do not overload. See, "Programme and consumption table".
• Alwaysfollowtheinstructionsonthedetergentpackaging.
• Washslightlysoiledlaundryatlowtemperatures.
• Usefasterprogrammesforsmallquantitiesoflightlysoiledlaundry.
• Donotuseprewashandhightemperaturesforlaundrythatisnotheavilysoiledor
stained.
• Ifyouplantodryyourlaundryinadryer,selectthehighestspinspeedrecommended
during washing process.
• Donotusemoredetergentthantherecommendedamountspecifiedonitspackage.
20 / EN Washing Machine /User’s Manual
4.5.4 Loading the laundry
1. Open the laundry cover.
2. Put the laundry items into the product in a loose manner.
3. Push and close the loading cover until you hear the locking sound. Ensure that no items
are caught in the door. The loading door is locked while a programme is running. The
door can only be opened a while after the programme comes to an end. Then you can
open the loading cover.
4.5.5 Correct load capacity
The maximum load capacity depends on the type of laundry, the degree of soiling and the
washing programme desired.
The product automatically adjusts the water amount according to the weight of the
laundry put inside it.
AWARNING:
Comply with the information in the section "Programme and consumption
table". When overloaded, product's washing performance will drop. Moreover, noise and
vibration problems may occur.
4.5.6 Using detergent and softener
C
When using detergent, softener, starch, fabric dye, bleacher and whitener, descaling agents;
read the manufacturer's instructions written on the package and follow the dosages specified.
Use measuring cup if available.
The detergent drawer is composed of three compartments:
–(1)forprewash
–(2)formainwash
–(3)forsoftener
–( ) in addition, there is a siphon piece in the softener
compartment.
Detergent, softener and other cleaning agents
• Adddetergentandsoftenerbeforestartingthewashingprogramme.
• Whilethewashingcycleisinprogress,donotleavethedetergentdispenseropen!
• Whenusingaprogrammewithoutprewash,donotputanydetergentintotheprewash
compartment (compartment nr. "1").
• Inaprogrammewithprewash,donotputliquiddetergentintotheprewash
compartment (compartment nr. "1").
• Donotselectaprogrammewithprewashifyouareusingadetergentbagordispensing
ball. Place the detergent bag or the dispensing ball directly among the laundry in the
product.
• Ifyouareusingliquiddetergent,donotforgettoplacetheliquiddetergentcontainer
intothemainwashcompartment(compartmentnumber“2”).
21 / EN Washing Machine /User’s Manual
Choosing the detergent type
Detergent type to be used depends on the fabric type and colour.
• Usedifferentdetergentsforcolouredandwhitelaundry.
• Washyourdelicateclothesonlywithspecialdetergents(liquiddetergent,wool
shampoo, etc.) used solely for delicate clothes.
• Whenwashingdarkcolouredclothesandquilts,itisrecommendedtouseliquid
detergent.
• Washwoollenswithspecialdetergentmadespecificallyforwoollens.
ACAUTION:
Use only detergents manufactured specifically for washing machines.
CAUTION:
Do not use Powdered Soap.
Adjusting detergent amount
The amount of washing detergent to be used depends on the amount of laundry, the
degree of soiling and water hardness.
• Donotuseamountsexceedingthedosagequantitiesrecommendedonthedetergent
package to avoid problems of excessive foam, poor rinsing, financial savings and finally,
environmental protection.
• Uselesserdetergentforsmallamountsorlightlysoiledclothes.
Using softeners
Pour the softener into the softener compartment of the detergent drawer.
• Donotexceedthe(>max<)levelsignonthesoftenercompartment.
• Ifthesoftenerhaslostitsfluidity,diluteitwithwaterbeforeputtingitinthedetergent
compartment.
Using liquid detergents
If the product contains a liquid detergent cup:
• Puttheliquiddetergentcontainerintothecompartmentno“2”.
• Iftheliquiddetergentlostitsfluidity,diluteitwithwaterbeforeputtingitintothe
detergent container.
If the product does not contain a liquid detergent cup:
• Donotuseliquiddetergentfortheprewashinaprogrammewithprewash.
• Liquiddetergentstainsyourclotheswhenusedwith"EndTime"functiontostarted
delayed. If you are going to use the End Time function, do not use liquid detergent.
22 / EN Washing Machine /User’s Manual
Using gel and tablet detergent
• Ifthegeldetergentthicknessisfluidalandyourproductdoesnotcontainaspecialliquid
detergent cup, put the gel detergent into the main wash detergent compartment during
first water intake. If your product contains a liquid detergent cup, fill the detergent into
this cup before starting the programme.
• Ifthegeldetergentthicknessisnotfluidalorintheshapeofcapsuleliquidtablet,putit
directly into the drum before washing.
• Puttabletdetergentsintothemainwashcompartment(compartmentnr."2")ordirectly
into the drum before washing.
Using starch
• Puttheliquidsoda,powdersodaorthefabricdyeintothesoftenercompartment.
Do not use softener and starch together in a washing cycle.
• Wipetheinsideoftheproductwithadampandcleanclothafterusingstarch.
Using limescale remover
•Whenrequired,uselimescaleremoversmanufacturedspecificallyforwashingmachines
only.
Using bleaches
Add the bleach at the beginning of the washing cycle by selecting a prewash
programme. Do not put detergent in the prewash compartment. As an alternative
application, select a programme with extra rinse and add the bleaching agent while the
product is taking water from the detergent compartment during first rinsing step.
• Donotusebleachingagentanddetergentbymixingthem.
• Usejustalittleamount(1/2teaglass-approx.50ml)ofbleachingagentandrinsethe
clothes very well as it causes skin irritation.
• Donotpourthebleachontothelaundry.
• Donotuseitwiththecoloureditems.
• Whenusingoxygen-basedwhitener,selectaprogrammewhichwashesthelaundryata
low temperature.
• Oxygen-basedwhitenerscanbeusedtogetherwiththedetergent.However,if
its thickness is not the same with the detergent, put the detergent first into the
compartment nr. "2" in the detergent drawer and wait until the detergent flows while
the product is taking in water. While the machine continues taking in water, add
whitener in the same compartment.
23 / EN Washing Machine /User’s Manual
4.5.7 Tips for efficient washing
Clothes
Light Colours and
whites Colours Black/Dark
Colours
Delicates/
woollens/
Silks
(Recommended
temperature range
based on soiling level:
40-90
oC)
(Recommended
temperature range
based on soiling level:
cold -40 oC)
(Recommended
temperature
range based on
soiling level: cold
-40 oC)
(Recommended
temperature
range based on
soiling level: cold
-30 oC)
Soiling Level
Heavily
Soiled
(difficult stains
such as grass,
coffee, fruits
and blood.)
It may be necessary
to pre-treat the
stains or perform
prewash. Powder
and liquid detergents
recommended
for whites can be
used at dosages
recommended for
heavily soiled clothes. It
is recommended to use
powder detergents to
clean clay and soil stains
and the stains that are
sensitive to bleaches.
Powder and
liquid detergents
recommended
for colours can be
used at dosages
recommended for
heavily soiled clothes.
It is recommended
to use powder
detergents to clean
clay and soil stains
and the stains that are
sensitive to bleaches.
Detergents which do
not contain bleach
should be used.
Liquid detergents
suitable for
colours and dark
colours can be
used at dosages
recommended
for heavily soiled
clothes.
Prefer liquid
detergents
produced for
delicate clothes.
woollen and silk
clothes must
be washed with
special woollen
detergents.
Normally
Soiled
(For example,
stains caused by
body on collars
and cuffs)
Powder and
liquid detergents
recommended for
whites can be used at
dosages recommended
for normally soiled
clothes.
Powder and
liquid detergents
recommended for
colours can be used at
dosages recommended
for normally soiled
clothes. Detergents
which do not contain
bleach should be used.
Liquid detergents
suitable for
colours and dark
colours can be
used at dosages
recommended
for normally
soiled clothes.
Prefer liquid
detergents
produced for
delicate clothes.
woollen and silk
clothes must
be washed with
special woollen
detergents.
Lightly
Soiled
(No visible stains
exist.)
Powder and
liquid detergents
recommended for
whites can be used at
dosages recommended
for lightly soiled clothes.
Powder and
liquid detergents
recommended
for colours can be
used at dosages
recommended for
lightly soiled clothes.
Detergents which do
not contain bleach
should be used.
Liquid detergents
suitable for
colours and dark
colours can be
used at dosages
recommended
for lightly soiled
clothes.
Prefer liquid
detergents
produced for
delicate clothes.
woollen and silk
clothes must
be washed with
special woollen
detergents.
24 / EN Washing Machine /User’s Manual
4.6 Operating the product
4.6.1 Control panel
17 - Programme selection knob
18 - Temperature indicator
19 - Spin speed indicator
20 - Duration information display
21 - Child lock enabled indicator
22 - End Time Setting button
23 - Door lock enabled indicator
24 - Programme Follow-up indicator
25 - On / Off button
26 - Start / Pause button
27 - Auxiliary function buttons
28 - Spin speed adjustment button
29 - Temperature adjustment button
30 - Programme selection indicator
17 18 19 20 21 22 23 24
25
2627282930
25 / EN Washing Machine /User’s Manual
4.6.2 Programme and consumption table
• :Selectable.
* : Automatically selected, no cancelling.
** : Energy Label programme (EN 60456 Ed.3)
*** : If maximum spin speed of the product is lower then this value, you can only select up to the maximum spin speed.
**** : Programme detects the type and quantity of the laundry to automatically adjust water and energy consumption
and programme time.
- : See the programme description for maximum load.
**“CottonEconomic40°C"and"CottonEconomic60°C"arestandardprogrammes.These
programmesareknownas‘40°Ccottonstandardprogramme’and‘60°Ccottonstandardprogramme’
and indicated with the
symbols on the panel.
EN 2Auxiliary functions
Programme (°C)
Max. Load (kg)
Water Consumption (l)
Energy Consumption (kWh)
Max. Speed***
Prewash
Shorter Wash
Rinse Plus
Selectable temperature range °C
Cottons Eco
60** 7 44 0.97 1400 Cold-60
60** 3.5 38 0.59 1400 Cold-60
40** 3.5 38 0.59 1400 Cold-60
Hygiene+ 90 7 85 1.90 1400 * 30-90
Shirts 60 3.5 57 1.00 800 Cold-60• • •
Mix 40 40 3.5 60 0.70 1000 Cold-40• •
Sportswear 40 3 55 0.55 1000 Cold-40• •
Dark Wash 40 3 60 0.60 1000 * Cold-40
Jeans 40 3 60 0.65 1000 Cold-60• •
Hand Wash 30 1 40 0.25 1200 Cold-30
Delicates 20° 20 3.5 45 0.15 1200 20
Mini 14’ 30 2 35 0.15 1400 Cold-30
Fast Full Load
90 7 67 2.00 1400 Cold-90
60 7 67 1.10 1400 Cold-90
30 7 67 0.25 1400 Cold-90
Woollens 40 1.5 49 0.25 1200 Cold-40
Synthetics 60 3 52 1.10 1200 Cold-60• • •
40 3 49 0.60 1200 Cold-60• • •
Cottons
90 7 70 2.20 1400 Cold-90• • •
60 7 70 1.55 1400 Cold-90• • •
40 7 67 0.90 1400 Cold-90• • •
26 / EN Washing Machine /User’s Manual
Indcatve values for Synthetcs programmes (EN)
Load (kg)
Water
Consumpton
(l)
Energy
Consumpton
(kWh)
Programme
Duraton
(mn) *
Remanng Mosture
Content (%) **
Remanng Mosture
Content (%) **
≤ 1000 rpm >1000rpm
Synthetcs 60 3 52 1.10
105 / 135 45 40
Synthetcs 40 3 49 0.60
105 / 135 45 40
* You can see the washng tme of the programme you have selected on the dsplay of the machne. It s normal that small
dfferences may occur between the tme shown on the dsplay and the real washng tme.
** Remanng mosture content values may dffer accordng to the selected spn speed.
C
The auxiliary functions in the table may vary according to the model of your product.
Water and power consumption may vary subject to the changes in water pressure, water hardness
and temperature, ambient temperature, type and amount of laundry, selection of auxiliary
functions and spin speed, and changes in electric voltage.
You can see the washing time of the programme you have selected on the display of the product.
It is normal that small differences may occur between the time shown on the display and the real
washing time.
Auxiliary function selection modes can be changed by the manufacturing company. Existing
selection modes can be removed or new selection modes can be added.
"The manufacturer reserves the right to make modifications in the programmes and auxiliary
functions given in the table. While these modifications will not change the product performance,
programme steps and durations can be changed."
27 / EN Washing Machine /User’s Manual
4.6.3 Programme selection
1 Determine the programme suitable for the type, quantity and soiling level of the laundry
in accordance with the "4.6.2 Programme and consumption table".
C
Programmes are limited with the highest spin speed appropriate for that particular type of
fabric.
When selecting a programme, always consider the type of fabric, colour, degree of soiling and
permissible water temperature.
Always select the relevant lowest required temperature. Higher temperature means higher
power consumption.
2 Select the desired programme with the
Programme Selection
knob.
4.6.4 Programmes
• Cottons Eco
Use to wash your normally soiled, durable cotton and linen laundry. Although it washes
longer than all other programmes, it provides high energy and water savings. Actual
water temperature may be different from the stated wash temperature. When you load
the machine with less laundry (e.g. ½ capacity or less), periods in programme stages may
automatically get shorter. In this case, energy and water consumption will decrease more,
providing a more economic wash. This programme is available in the models with the
remaining time indicator.
Cottons
Use for your cotton laundry (such as bed sheets, duvet and pillowcase sets, towels,
bathrobes, underwear, etc.). Your laundry will be washed with vigorous washing action for a
longer washing cycle.
• Synthetics
Use to wash your synthetic clothes (shirts, blouses, synthetic/cotton blends, etc.). It
washes with a gentle action and has a shorter washing cycle compared to the Cottons
programme.
For curtains and tulle, use the Synthetic 40˚C programme with prewash and anti-creasing
functions selected. As their meshed texture causes excessive foaming, wash the veils/
tulle by putting little amount of detergent into the main wash compartment. Do not put
detergent in the prewash compartment.
• Woollens
Use to wash your woollen clothes. Select the appropriate temperature complying with the
tags of your clothes. Use appropriate detergents for woollens.
28 / EN Washing Machine /User’s Manual
“ThewoolwashcycleofthismachinehasbeenapprovedbyTheWoolmarkCompany
for the washing of machine washable wool products provided that the products are
washed according to the instructions on the garment label and those issued by the
manufacturer of this washing machine. M1367.
“InUK,Eire,HongKongandIndiatheWoolmarktrademarkisaCertificationtrademark.”
• Hand Wash
Usetowashyourwoollen/delicateclothesthatbear“notmachine-washable”tagsandfor
which hand wash is recommended. It washes laundry with a very gentle washing action to
not to damage clothes.
• Hygiene+
Use this programme for laundry of allergic individuals and laundry that require hygienic
washing (baby clothes, sheet, bedding, underwear, etc.). Programme period is longer and
clothes are washed intensely at high temperature.
• Hygiene+60°Cprogrammeistestedandapprovedby“TheBritishAllergyFoundation”
(Allergy UK) in United Kingdom.
• Dark Wash
Use this programme to wash your dark coloured laundry or coloured laundry that you do
not want them get faded. Washing is performed with little mechanic action and at low
temperatures. It is recommended to use liquid detergent or woollen shampoo for dark
coloured laundry.
• Shirts
Use to wash the shirts made of cotton, synthetic and synthetic blended fabrics together.
• Mix 40
Use to wash your cotton and synthetic clothes together without sorting them.
• Delicates 20°
Use to wash your clothes that require sensitive washing. It washes with more gentle
washing action compared to the synthetics programme and does not make intermediate
spins.
• Mini 14’
Use to wash your lightly soiled and unstained cotton laundry in a short time.
• Fast Full Load
Use to wash your lightly soiled and unstained cotton laundry in a short time.
29 / EN Washing Machine /User’s Manual
• Sportswear
Use this programme to wash your garments that are worn for a short time such as
sportswear. It is suitable to wash little amount of cotton / synthetic blended garments.
• Jeans
Use this programme to wash clothes such as trousers, jackets, vests, etc., made of denim.
Lower mechanical movement in washing cycles and lower rpm in spinning cycles are used
to prevent washing damages on stoned jeans as well as to ensure a longer life.
Rinse
Use when you want to rinse or starch separately.
• Spin+Pump
Use to drain the water in the product.
4.6.5 Temperature selection
Whenever a new programme is selected, the recommended temperature for the selected
programme appears on the temperature indicator.
To decrease the temperature, press the Temperature Adjustment button. Temperature will
decrease gradually.
C
If the programme has not reached the heating step, you can change the temperature without
switching the product to Pause mode.
4.6.6 Spin speed selection
Whenever a new programme is selected, the recommended spin speed of the selected
programme is displayed on the spin speed indicator.
To decrease the spin speed, press the Spin Speed Adjustment button. Spin speed
decreases gradually.
Then, depending on the model of the product, "Rinse Hold" and "No Spin" options appear
on the display. See "4.6.7 Auxiliary function selection" section for explanations of these
options.
30 / EN Washing Machine /User’s Manual
Rinse Hold
If you are not going to unload your clothes immediately after the programme completes,
you can use rinse hold function to keep your laundry in the final rinsing water in order to
prevent them from getting wrinkled when there is no water in the product. Press Start/
Pause button after this process if you want to drain the water without spinning your
laundry. Programme will resume and complete after draining the water.
If you want to spin the laundry held in water, adjust the Spin Speed and press Start / Pause
button. The programme resumes. Water is drained, laundry is spun and the programme is
completed.
C
If the programme has not reached the spinning step, you can change the spinning speed
without switching the product to Pause mode.
4.6.7 Auxiliary function selection
Select the desired auxiliary functions before starting the programme.
The chosen auxiliary function indicator lights up.
C
When you try to change an auxiliary function that is not allowed to be selected with the
current programme, indicator light of the relevant auxiliary function will flash and an audio
warning is given.
Furthermore, you may also select or cancel auxiliary functions that are suitable to the
running programme after the washing cycle starts. If the wash cycle has reached a point
where no auxiliary function can be selected, an audio warning will be given and the related
auxiliary function's light will flash.
C
Some functions cannot be selected together. If a second auxiliary function conflicting with
the first one is selected before starting the product, the function selected first will be
cancelled and the second auxiliary function selection will remain active. For example, if you
want to select Quick Wash after you have selected the Additional Water, Additional Water will
be cancelled and Quick Wash will remain active.
An auxiliary function that is not compatible with the programme cannot be selected. (See,
"4.6.2 Programme and consumption table".)
Some programmes have auxiliary functions that must be operated simultaneously. Those
functions cannot be cancelled. The frame of the auxiliary function will not be illuminated, only
inner area will be illuminated.
31 / EN Washing Machine /User’s Manual
• Prewash
A Prewash is only worthwhile for heavily soiled laundry. Not using the Prewash will save
energy, water, detergent and time.
• Rinse Plus
This function enables the product to make another rinse in addition to the one already
made after the main wash. Thus, the risk for sensitive skins (babies, allergic skins, etc.) to
be effected by the minimal detergent remnants on the laundry can be reduced.
• Shorter Wash
This function can be used in Cottons and Synthetics programmes. It decreases the
washing times and also the number of rinsing steps for lightly soiled laundry.
C
When you select this function, load your product with half of the maximum laundry specified
in the programme table.
4.6.8 End Time
With the End Time function, the startup of the programme may be delayed up to 24 hours.
After pressing End Time button, the programme's estimated ending time is displayed. If
the End Time is adjusted, End Time indicator is illuminated.
1 Open the loading door, place the laundry and put detergent, etc.
2 Select the washing programme, temperature, spin speed and, if required, the auxiliary
functions.
3 Set the end time of your choice by pressing the End Time button. End Time indicator
illuminates.
4PressStart/Pausebutton.Timecountdownstarts.“:”signinthemiddleoftheendtime
on the display starts flashing.
Adjusting the end time
If you want to cancel End Time function, press On / Off button to turn off and on the
product.
C
Do not use liquid detergents when you activate End Time function! There is the risk of
staining of the clothes.
C
Additional laundry may be loaded to the product during the End Time countdown period. At
the end of the countdown, End Time indicator turns off, washing cycle starts and the time of
the selected programme appears on the display.
When the End Time selection is completed, the time appears on the screen is the total of the
end time chosen plus the duration of the selected programme.
32 / EN Washing Machine /User’s Manual
4.6.9 Starting the programme
1. Press Start / Pause button to start the programme.
2. Programme follow-up light showing the startup of the programme will turn on.
C
If no programme is started or no key is pressed within 10 minute during programme selection
process, the product will turn off automatically. Display and all indicators will turn off.
If you press on the On / Off button, the programme information set as default will be
displayed.
4.6.10 Loading door lock
There is a locking system on the loading door of the product that prevents opening of the
door in cases when the water level is unsuitable.
"Door Locked" light in the panel turns on when the loading door is locked.
4.6.11 Changing the selections after programme has started
After the programme has started you can make the following changes.
Switching the product to pause mode
Press the Start/Pause button to switch the machine to pause mode while a programme is
running. The light of the step and Start/Pause which the machine is in, starts flashing in
the Programme Follow-up indicator to show that the machine has been switched to the
pause mode. Also loading door light blinks until the door is ready to be opened. When the
loading door is ready to be opened Loading Door light will turn off, programme step light
and Start / Pause light will continue to flash.
Also, when the loading door is ready to be opened, Loading Door light will also turn off in
addition to the programme step light.
Changing the auxiliary function, speed and temperature
Depending on the step the programme has reached, you can cancel or select the auxiliary
functions. See "4.6.7 Auxiliary function selection".
Also you can change temperature and cycle adjustments. See "4.6.5 Temperature
selection" and "4.6.6 Spin speed selection".
C
If no change is allowed, the relevant light will flash for 3 times.
Adding or taking out laundry
1. Press the Start / Pause button to switch the product to pause mode. The programme
follow-up light of the relevant step during which the machine was switched into the
pause mode will flash.
2. Wait until the Loading Door can be opened.
3. Open the Loading Door and add or take out the laundry.
4. Close the Loading Door.
5. Make changes in auxiliary functions, temperature and speed settings if necessary.
6. Press the Start / Pause button to operate the product.
33 / EN Washing Machine /User’s Manual
4.6.12 Child Lock
Use Child Lock function to prevent children from tampering with the product. Thus you can
avoid any changes in a running programme.
C
You can switch on and off the product with On / Off button when the Child Lock is active.
When you switch on the product again, programme will resume from where it has stopped.
To activate the Child Lock:
Press and hold
2nd Auxiliary Function
button for 3 seconds. In the programme
selectiondisplayonthepanel,“Childlockenabled”lightwillturnon.Whenthislightison
you can stop pressing on
2nd Auxiliary Function
button .
To deactivate the child lock:
Press and hold
2nd Auxiliary Function
button for 3 seconds. In the programme
selectiondisplayonthepanel,“Childlockenabled”lightwillturnoff.
4.6.13 Cancelling the programme
The programme is cancelled when the product is turned off and on again. Press and hold
On / Off
button for 3 seconds.
C
If you press On / Off button when the Child Lock is enabled, the programme will not be
cancelled. You should cancel the Child Lock first.
If you want to open the loading door after you have cancelled the programme but it is not
possible to open the loading door since the water level in the product is above the loading
dooropening,thenturntheProgrammeSelectionknobtoPump+Spinprogrammeand
discharge the water in the product.
4.6.14 End of programme
"End" warning appears on the display when the programme is completed.
If you do not press any button for 10 minutes, the product will turn off automatically.
Display and all indicators are turned off.
Completed programme steps will be displayed if you press On / Off button.
4.6.15 Energy saving mode
If no action is taken for 2 minutes after turning on the product with On / Off button
or after the chosen programme ends, the product will switch to energy saving mode
automatically. The brightness of the indicator lights will decrease. This display will be
dimmed completely if programme time display is available.
If you turn the programme button or touch any button, the lights will switch back to
previous position.
C
This is a feature of this product, and not an error.
34 / EN Washing Machine /User’s Manual
4.7 Maintenance and cleaning
Service life of product extends and frequently experienced problems will be reduced if it is
cleaned at regular intervals.
4.7.1 Cleaning the detergent drawer
Clean the detergent drawer at regular intervals (every
4-5 washing cycles) as shown below in order to prevent
accumulation of powder detergent in time.
If more than normal amount of water and softener mixture
starts to gather in the softener compartment, the siphon
must be cleaned.
1 Press the indicated point on the siphon in the softener compartment and pull the
drawer towards you until the compartment is removed from the machine.
2 Lift the rear part of the siphon to remove it as illustrated.
3 Wash the detergent drawer and the siphon with plenty of lukewarm water in a
washbasin. In order to prevent the residues to contact your skin, clean it with an
appropriate brush by wearing a pair of gloves.
3 Insert the drawer back into its place after cleaning and make sure that it is seated
well.
4.7.2 Cleaning the loading door and the drum
For products with drum cleaning programme, please see Operating the product -
Programmes.
For products without drum cleaning, follow the below steps
to clean the drum:
Select
Additional Water
or
Extra Rinse
auxiliary functions. Use a
Cottons programme without pre-wash. Set
the temperature to the level
recommended on the drum cleaning agent which can be provided
from authorised services.
Apply this procedure
without any laundry in the
product.
Before starting the programme, put 1 pouch of special drum cleaning agent (if
the special agent could not be supplied, put max. 100 g of powder anti-limescale) into the
mainwashdetergentcompartment(compartmentno.„2“).Iftheanti-limescaleisintablet
form,putonlyonetabletintothemainwashcompartmentno.„2“.Drytheinsideofthe
bellow with a clean piece of cloth after the programme has come to an end.
C
Repeat Drum Cleaning process in every 2 months.
Use an anti-limescale suitable for washing machines.
35 / EN Washing Machine /User’s Manual
After every wash make sure that no foreign substance is
left in the drum.
If the holes on the door bellow shown in the figure are
blocked, open the holes using a toothpick.
Foreign metal substances will cause rust stains in the drum.
Clean the stains on the drum surface by using cleaning
agents for stainless steel.
Never use steel wool or wire wool. These will damage the
painted, chromated and plastic surfaces.
4.7.3 Cleaning the body and control panel
Wipe the body of the product with soapy water or non-corrosive mild gel detergents as
necessary, and dry with a soft cloth.
Use only a soft and damp cloth to clean the control panel.
4.7.4 Cleaning the water intake filters
There is a filter at the end of each water intake valve at the rear of the product and also
at the end of each water intake hose where they are connected to the tap. These filters
prevent foreign substances and dirt in the water to enter the product. Filters should be
cleaned as they do get dirty.
1. Close the taps.
2. Remove the nuts of the water intake hoses to access the filters on the water intake
valves. Clean them with an appropriate brush. If the filters are too dirty, remove them
from their places with a pliers and clean in this way.
3. Take out the filters on the flat ends of the water intake hoses together with the
gaskets and clean thoroughly under running water.
4. Replace the seals and filters carefully and tighten their nuts by hand.
36 / EN Washing Machine /User’s Manual
4.7.5 Draining remaining water and cleaning the pump filter
The filter system in your product prevents solid items such as buttons, coins and fabric
fibres clogging the pump impeller during discharge of washing water. Thus, the water will
be discharged without any problem and the service life of the pump will extend.
If the product fails to drain water inside it, the pump filter is clogged. Filter must be
cleaned whenever it is clogged or every 3 months. Water must be drained off first to clean
the pump filter.
In addition, prior to transporting the product (e.g., when moving to another house) water
should be drained completely.
ACAUTION:
Foreign substances left in the pump filter may damage your product or may
cause noise problem.
CAUTION:
In regions where freezing is possible, the supply tap must be closed, system
hose must be removed and the water inside the product must be drained when the product
is not in use.
CAUTION:
After each use, turn off the water tap to which the mains hose is connected.
In order to clean the dirty filter and discharge the water:
1 Unplug the product to cut off the supply power.
ACAUTION:
Temperatureofthewaterinsidetheproductmayriseupto90ºC.Toavoid
the burning risk, clean the filter after the water inside the product is cooled down.
2. Open the filter cover.
37 / EN Washing Machine /User’s Manual
3 Follow the below procedures in order to drain water.
If the product has an emergency water draining hose, in order to drain the water:
a Pull the emergency draining hose out from its seat
b Place a large container at the end of the hose. Drain the water into the container by
pulling out the plug at the end of the hose. When the container is full, block the inlet
of the hose by replacing the plug. After the container is emptied, repeat the above
procedure to drain the water in the product completely.
c When draining of water is finished, close the end by the plug again and fix the hose in
its place.
d Turn and remove the pump filter.
4. Clean any residues inside the filter as well as fibres, if any, around the pump impeller
region.
5. Replace the filter.
6. If the filter cap is composed of two pieces, close the filter cap by pressing on the tab. If
it is one piece, seat the tabs in the lower part into their places first, and then press the
upper part to close.
38 / EN Washing Machine /User’s Manual
5
Troubleshooting
Problem Reason Soluton
Programme does not start
after closing the door
Start / Pause / Cancel button was not pressed. •*Press the Start / Pause / Cancel
button.
Programme cannot be
started or selected.
The product may have switched to self protection
mode due to a supply problem (line voltage, water
pressure, etc.).
• Press and hold On / Off button for
3 seconds to reset the product to
factory settings. (See. Cancelling the
programme")
Water inside the product. Some water might have remained in the product
due to the quality control processes in the
production.
•This is not a failure; water is not
harmful to the product.
The product does not take
water in.
Tap is turned off. •Turn on the taps.
Water inlet hose is bent or crushed. •Reposition the hose.
Water inlet filter is clogged. •Clean the filter.
Loading door may be open. •Close the door.
The product does not drain
water.
Water drain hose might be clogged or twisted. •Clean or reposition the hose.
Pump filter is clogged. •Clean the pump filter.
Product vibrates or makes
noise.
Product might be standing unbalanced. •Steady the product by adjusting the
feet.
A hard substance might have entered into the
pump filter.
•Clean the pump filter.
Transportation safety bolts are not removed. •Remove the transportation safety
bolts.
Laundry quantity in the product might be too little. •Add more laundry to the product.
Excessive laundry might be loaded in the product. •Take out some of the laundry from the
product or distribute the load by hand
to balance it evenly in the product.
Product might be leaning on a rigid item. •Make sure that the product is not
leaning on anything.
There is water leaking from
the bottom of the product.
Water drain hose might be clogged or twisted. •Clean or reposition the hose.
Pump filter is clogged. •Clean the pump filter.
Product stopped shortly
after the programme
started.
Machine might have stopped temporarily due to
low voltage.
•Product will resume running when the
voltage restores to the normal level.
Product directly discharges
the water it takes in.
Draining hose might not be at adequate height. •Connect the water draining hose as
described in the operation manual.
No water can be seen in the
product during washing.
Water is below the visible area of the door. •This is not a failure. Environmentalist
washing machines use less water.
39 / EN Washing Machine /User’s Manual
Problem Reason Solution
Loading door cannot be
opened.
The cover lock is activated due to the water level
inside the product.
•Drain the water by running the Pump
or Spin programme.
Product is heating up the water or it is at the
spinning cycle.
• Wait until the programme completes.
Child lock is engaged. Door lock will be deactivated
a couple of minutes after the programme has
come to an end.
•Wait for a couple of minutes for
deactivation of the door lock.
Washing takes longer
time than specified in the
manual.(*)
Water pressure is low. •Product waits until taking in adequate
amount of water to prevent poor
washing quality due to the decreased
amount of water. Therefore, the
washing time extends.
Voltage might be low. •Washing time is prolonged to avoid
poor washing results when the supply
voltage is low.
Input temperature of water might be low. •Required time to heat up the water
extends in cold seasons. Also, washing
time can be lengthened to avoid poor
washing results.
Number of rinses and/or amount of rinse water
might have increased.
•Product increases the amount of rinse
water when good rinsing is needed
and adds an extra rinsing step if
necessary.
Excessive foam might have occurred and
automatic foam absorption system might have
been activated due to too much detergent usage.
• Use recommended amount of
detergent.
Programme time does not
countdown. (On models with
display) (*)
Timer may stop during water intake. •Timer indicator will not countdown
until the product takes in adequate
amount of water. The product will
wait until there is sufficient amount
of water to avoid poor washing results
due to lack of water. Timer indicator
will resume countdown after this.
Timer may stop during heating step. •Timer indicator will not countdown
until the product reaches the selected
temperature.
Timer may stop during spinning step. •Automatic unbalanced load detection
system might be activated due to the
unbalanced distribution of the laundry
in the product.
Programme time does not
countdown. (*)
There might be unbalanced load in the product. •Automatic unbalanced load detection
system might be activated due to the
unbalanced distribution of the laundry
in the product.
40 / EN Washing Machine /User’s Manual
Problem Reason Solution
Product does not switch to
spinning step. (*)
There might be unbalanced load in the product. •Automatic unbalanced load detection
system might be activated due to the
unbalanced distribution of the laundry
in the product.
The product will not spin if water is not drained
completely.
•Check the filter and the draining hose.
Excessive foam might have occurred and
automatic foam absorption system might have
been activated due to too much detergent usage.
• Use recommended amount of
detergent.
Washing performance is
poor: Laundry turns
Grey. (**)
Insufficient amount of detergent has been used
over a long period of time.
•Use the recommended amount of
detergent appropriate for water
hardness and the laundry.
Washing was made at low temperatures for a
long time.
•Select the proper temperature for the
laundry to be washed.
Insufficient amount of detergent is used with
hard water.
•Using insufficient amount of
detergent with hard water causes the
soil to stick on the cloth and this turns
the cloth Grey in time. It is difficult to
eliminate Greying once it happens.
Use the recommended amount of
detergent appropriate for water
hardness and the laundry.
Excessive amount of detergent was used. •Use the recommended amount of
detergent appropriate for water
hardness and the laundry.
Washing performance is
poor: Stains persist or the
laundry is not whitened. (**)
Insufficient amount of detergent is used. •Use the recommended amount of
detergent appropriate for water
hardness and the laundry.
Excessive laundry was loaded in. •Do not load the product in excess.
Load with amounts recommended
in the "4.6.2 Programme and
consumption table".
Wrong programme and temperature were
selected.
•Select the proper programme and
temperature for the laundry to be
washed.
Wrong type of detergent is used. •Use original detergent appropriate for
the product.
Excessive amount of detergent was used. •Put the detergent in the correct
compartment. Do not mix the
bleaching agent and the detergent
with each other.
41 / EN Washing Machine /User’s Manual
Problem Reason Solution
Washing performance is
poor: Oily stains appeared
on the laundry. (**)
Regular drum cleaning is not applied. •Clean the drum regularly. For this
procedure, please see "4.7.2 Cleaning
the loading door and the drum".
Washing performance
is poor: Clothes smell
unpleasantly. (**)
Odours and bacteria layers are formed on the
drum as a result of continuous washing at lower
temperatures and/or in short programmes.
•Leave the detergent drawer as well
as the loading door of the product ajar
after each washing. Thus, a humid
environment favorable for bacteria
cannot occur in the machine.
Colour of the clothes faded.
(**)
Excessive laundry was loaded in. •Do not load the product in excess.
Detergent in use is damp. • Keep detergents closed in an
environment free of humidity and
do not expose them to excessive
temperatures.
A higher temperature is selected. •Select the proper programme and
temperature according to the type
and soiling degree of the laundry.
It does not rinse well. The amount, brand and storage conditions of the
detergent used are inappropriate.
•Use a detergent appropriate for
the washing machine and your
laundry. Keep detergents closed in
an environment free of humidity and
do not expose them to excessive
temperatures.
Detergent is put in the wrong compartment. •If detergent is put in the prewash
compartment although prewash
cycle is not selected, the product can
take this detergent during rinsing or
softener step. Put the detergent in
the correct compartment.
Pump filter is clogged. •Check the filter.
Drain hose is folded. •Check the drain hose.
Laundry became stiff after
washing. (**)
Insufficient amount of detergent is used. •Using insufficient amount of
detergent for the water hardness
can cause the laundry to become
stiff in time. Use appropriate amount
of detergent according to the water
hardness.
Detergent is put in the wrong compartment. •If detergent is put in the prewash
compartment although prewash
cycle is not selected, the product can
take this detergent during rinsing or
softener step. Put the detergent in
the correct compartment.
Detergent might be mixed with the softener. •Do not mix the softener with
detergent. Wash and clean the
dispenser with hot water.
43 / EN Washing Machine /User’s Manual
Problem Reason Solution
Foam is overflowing from
the detergent drawer.
Too much detergent s used. •Mx 1 tablespoonful softener and
½ l water and pour nto the man
wash compartment of the detergent
drawer.
•Put detergent nto the product
sutable for the programmes and
maximumloadsindicatedinthe“4.6.3
Programmeandconsumptiontable”.
When you use addtonal chemcals
(stan removers, bleaches and etc),
reduce the amount of detergent.
Laundry remains wet at the
end of the programme. (*)
Excessve foam mght have occurred and
automatc foam absorpton system mght have
been actvated due to too much detergent usage.
•Use recommended amount of
detergent.
(*) The product does not switch to spinning step when the laundry is not evenly distributed in the drum to
prevent any damage to the product and to its surrounding environment. Laundry should be rearranged and re-
spun.
(**) Regular drum cleaning is not applied. Clean the drum regularly. See 4.7.2
ACAUTION:
If you cannot eliminate the problem although you follow the instructions in this
section, consult your dealer or an Authorised Service Agent. Never try to repair a nonfunctional
product yourself.
Guarantee
De
tails
Your new Blomberg product is guaranteed against faulty materials, defective components or
manufacturing defects. The guarantee starts from the date of original purchase of the product
for a period of three (3) years, unless Beko plc (the Manufacturer”) agrees to extend the
guarantee for the product in writing. If you have any questions about the guarantee on your
product (including how long it is valid), please contact your retailer or our Call Centre on 0333
207 9870.
This guarantee does not in any way diminish or affect your statutory rights in connection with
the product. This guarantee is in addition to your statutory rights as a consumer. If you have
any questions about these rights, please contact the retailer from which you purchased the
product. In certain circumstances, it is possible that your statutory rights may offer additional
or higher levels of protection than those offered under the terms of this guarantee.
What is covered by this guarantee?
Repairs to the product required as a result of faulty materials, defective components
or manufacturing defects.
Functional replacement parts to repair a product.
The costs of a Blomberg Approved Engineer to carry out the repair.
What is not covered?
Transit and delivery damage.
Cabinet or appearance parts, including but not limited to control knobs, flaps and
handles.
Accessories and/or consumable items including but not limited to ice trays, scrapers,
cutlery baskets, filters and light bulbs.
Repairs necessary as a direct or indirect result of:
- Accidental damage, misuse or abuse of a product.
- An attempted repair of a product by anyone other than a Blomberg Approved
Engineer (the “Engineer”).
- Installation or use of a product where such installation or use fails to meet the
requirements contained in this guarantee or the User Instructions Booklet.
Repairs to a product operated at any time on commercial or non-residential household
premises (unless we have previously agreed to the installation environment).
This guarantee is limited to the cost of repairing the product. To the extent permitted by law,
Beko plc (the “Manufacturer”) does not accept and will not be held liable for any financial loss
incurred in connection with the failure of any product to operate in accordance with the
expected standards. Such financial loss includes but is not limited to loss arising from:
Time taken off work.
Damaged food, clothing or other items.
Meals taken at restaurants or from takeaways.
General compensation for inconvenience.
Important Notes
Your product is designed and built for domestic household use only.
The guarantee will automatically be void if the product is installed or is used in
commercial or non-residential domestic household premises, unless we have
previously agreed to the installation environment.
The product must be correctly installed, located and operated in accordance with the
instructions contained in the User Instructions Booklet provided with your product.
Professional installation by a qualified Electrical Domestic Appliance Installer is
recommended for all Washing Machines, Dishwashers and Electric Cookers (as
incorrect installation may result you having to pay for the cost of repairing thein
product).
Gas Cookers must be professionally installed by a Gas Safe (or Gas Networks Ireland
for Republic of Ireland) registered gas installer.
This guarantee is given in respect of products purchased and used within the United
Kingdom and the Republic of Ireland.
This guarantee is effective from the initial date of purchase of a new product from an
authorised retailer and will be void if the product is resold.
This guarantee does not apply to graded sales (where the product is purchased as a
“second”).
Possession of a copy of these terms and conditions does not necessarily mean that a
product has the benefit of this guarantee. If you have any questions, please call our
Call Centre on the number set out above.
The Manufacturer reserves the right to terminate the guarantee if its staff or
representatives are subjected to physical or verbal abuse in the course of carrying out
their duties.
Optional extras, where available (i.e. extendable feet) are supplied on a chargeable
basis only.
Does Blomberg offer replacements?
This is a repair-only guarantee. On occasion the Manufacturer may at its sole discretion,
replace your product with a new product instead of carrying out a repair. Where a replacement
is offered, this would normally be an identical model, but when this is not possible, a model of
similar specification will be provided. The Manufacturer will cover the costs and arrange for
the delivery of the new product and for the return of the old product. Any costs related to
disconnecting the faulty product and installing the replacement product will not be borne by
the Manufacturer unless previously agreed to in writing. The original guarantee will continue
to apply to the replacement product; the new product will not come with a new guarantee.
When will the repair take place?
Our engineers work Monday to Friday 9.00am to 5.00pm. Appointments outside these hours
may be possible at the sole discretion of the Manufacturer but cannot be guaranteed. Whilst
our Engineers will endeavour to minimize inconvenience and to meet requests for specific
timed appointments, this cannot be guaranteed. The Manufacturer will not be liable for delays
or if it is unable to carry out a repair because a convenient appointment cannot be arranged.
Will there be any charge for the repairs?
It is your responsibility to provide evidence to the Engineer that your product is covered by this
guarantee with a proof of purchase. The Manufacturer reserves the right to charge for the
reasonable cost of any service call if:
You cannot provide evidence that your product is covered by this guarantee.
Where a service call has been made and the engineer finds that there is no fault with
your product.
That your product has not been installed or operated in accordance with the User
Instructions Booklet.
That the fault was caused by something other than faulty materials, defective
components or manufacturing defects.
For missed appointments.
Payment of these costs are due immediately upon the Engineer providing you with an invoice.
If you fail to pay the costs for the service call in a timely manner, the Manufacturer reserves
the right to terminate the guarantee.
If you are a resident of the United Kingdom, this guarantee will be governed by English law
and subject to the English Courts, save where you live in another part of the United Kingdom,
in which case the law and courts of that location will apply.
If you are resident in the Republic of Ireland, this guarantee will be governed by Irish law and
the Irish courts will have jurisdiction.
HOW TO OBTAIN SERVICE
Please keep your purchase receipt or other proof of purchase in a safe place; you will need to
have it should the product require attention under guarantee.
It will be useful if you complete the details below, as it will help us assist you when requesting
service. (The model number is printed on the Instruction Booklet and the serial number is
printed on the Rating Label affixed to the appliance). Recording of these details alone will not
count as proof of purchase. A valid proof of purchase is required for under guarantee service.
The area around the product must be easily accessible to the Engineer without the need for
cabinets or furniture being removed.
It is your responsibility to ensure our Engineers have a clean and safe environment to carry
out any repairs.
…………………………………………………………………………………………………………
Model No:
Serial No:
Retailer:
Date of purchase:
…………………………………………………………………………………………………………..
For service under guarantee simply telephone the appropriate number below
UK Mainland & Northern Ireland: 0333 207 9870.
Republic of Ireland: 01 691 0160
Register your appliance at www.blomberguk.com/register
Before requesting service please check the troubleshooting guide in the Operating Instructions
as a charge may be levied where no fault is found even though your product may still be under
guarantee.
Service once the manufacturers guarantee has expired
If you have purchased an extended guarantee please refer to the instructions contained within
the extended guarantee agreement document, otherwise please call the appropriate number
above where service can be obtained at a charge.
Should you experience any difficulty in obtaining service contact the Blomberg Customer
Helpline on Tel: 0333 207 9870 or e-mail: customerservice@support.Blomberguk.com
……………………………………………………………................................................................
This guarantee is provided by Beko plc. Beko House, 1 Greenhill Crescent, Watford, Herts,
WD18 8QU. Beko plc is registered in England and Wales with company registration number
02415578.
www.blomberginternational.com
info@blomberginternational.com
(14:33).26-12-16 /2820524634
Document Number :


Produkt Specifikationer

Mærke: Blomberg
Kategori: Vaskemaskine
Model: LWF27441

Har du brug for hjælp?

Hvis du har brug for hjælp til Blomberg LWF27441 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Vaskemaskine Blomberg Manualer

Blomberg

Blomberg WAF 7360 A Manual

22 September 2024
Blomberg

Blomberg WAF 7240A Manual

20 September 2024
Blomberg

Blomberg WAF 7540S Manual

18 September 2024
Blomberg

Blomberg LWF29441 Manual

9 September 2024
Blomberg

Blomberg WAF 1540A Manual

4 September 2024
Blomberg

Blomberg LRI1854110 Manual

2 September 2024
Blomberg

Blomberg WAF 7360S Manual

31 August 2024
Blomberg

Blomberg LWI284420 Manual

30 August 2024

Vaskemaskine Manualer

Nyeste Vaskemaskine Manualer