Boss BCB-30X Manual

Boss Modtager BCB-30X

Læs nedenfor 📖 manual på dansk for Boss BCB-30X (1 sider) i kategorien Modtager. Denne guide var nyttig for 14 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/1

English

Owner’s Manual

BCB-30X Pedal Board Before using this unit, carefully read “USING THE UNIT SAFELY” and “IMPORTANT NOTES.” After reading, keep the document(s)

where it will be available for immediate reference.

Eect Unit Installation Examples

By cutting the included holding pad to match the shape of the products that you want to install, you can hide the cabling and create a clean layout.

Example 1 Example 2 Example 3

USING THE UNIT SAFELY

Used for instructions intended to alert the

user to the risk of injury or material

damage should the unit be used

improperly.

* Material damage refers to damage or

other adverse effects caused with

respect to the home and all its

furnishings, as well to domestic animals

or pets.

Used for instructions intended to alert the

user to the risk of death or severe injury

should the unit be used improperly.

The symbol alerts the user to things that must be

carried out. The specific thing that must be done is

indicated by the design contained within the circle. In the

case of the symbol at left, it means that the power-cord

plug must be unplugged from the outlet.

The symbol alerts the user to important instructions or

warnings.The specific meaning of the symbol is

determined by the design contained within the triangle. In

the case of the symbol at left, it is used for general

cautions, warnings, or alerts to danger.

The symbol alerts the user to items that must never be

carried out (are forbidden). The specific thing that must

not be done is indicated by the design contained within

the circle. In the case of the symbol at left, it means that

the unit must never be disassembled.

About WARNING and CAUTION Notices About the Symbols

ALWAYS OBSERVE THE FOLLOWING

Do It Yourself 1 (Cutting the Holding Pad)

When installing stompboxes, you can save layout time by using the existing pre-cuts in the holding pad to

remove unneeded portions.

The cutouts at the left and right of the holding pad indicate the positions that are above the cable guides

(places to conceal long cables) when it is placed in the case. Use these cutouts when deciding where to

position your eect units, and cut the holding pad so that cables can be accommodated neatly when the

eect units are installed.

* If you use a knife to cut the holding pad, take care not to injure yourself.

* When cutting the cutouts, take care not to damage nearby equipment with the knife.

Holding pad

Cutouts

Cable guide

Do It Yourself 2 (Keeping the Cables Neat)

If the power supply parallel cable and long patch cables are aligned with the cable guide, the cables can be

managed neatly.

Cable guide

MEMO

To detach the lid, lift it to the position shown in the illustration, and then press in the direction of the arrow.

Making Connections

* To prevent malfunctions or speaker damage, be sure to minimize the volume of all devices and power them o before

you make connections.

* After you have made connections correctly, you must observe the following procedure when turning on the power

Malfunctions or speaker damage might occur if you fail to observe the correct order.

Main Specications

Dimensions 330 (W) x 307 (D) x 100 (H) mm

13 (W) x 12-1/8 (D) x 3-15/16 (H) inches

Inside dimensions 66 (H) mm

2-5/8 (H) inches

Weight 1.3 kg

2 lbs 14 oz

Accessories

4-pin parallel DC cable x 1

Pre-cut insert pad (thickness: 10 mm) x 1

Owner’s Manual

Option

(sold separately)

AC adaptor: PSA series

Pre-cut insert pad (thickness: 10 mm)

* This document explains the specications of the product at the time that the document was issued. For the latest

information, refer to the Roland website.

When turning the power on: Power-on the amp last.

When turning the power o: Power-o the amp rst.

Roland Corporation

2036-1 Nakagawa, Hosoe-cho, Kita-ku, Hamamatsu, Shizuoka 431-1304, JAPAN

Roland Corporation

ENA 23 Zone 1 nr. 1620 Klaus-Michael Kuehnelaan 13, 2440 Geel, BELGIUM

Importer:

Manufacturer:

For EU Countries

Roland Corporation

2036-1 Nakagawa, Hosoe-cho, Kita-ku, Hamamatsu, Shizuoka 431-1304, JAPAN

Roland Europe Group Limited

Hive 2, 1530 Arlington Business Park, Theale, Reading, Berkshire. RG7 4SA United Kingdom

Importer:

Manufacturer:

For the U.K.

For EU Countries

IMPORTANT NOTES

Placement

• Depending on the material and

temperature of the surface on which you

place the unit, its rubber feet may discolor

or mar the surface.

Maintenance

• Never use benzine, thinners, alcohol

or solvents of any kind, to avoid the

possibility of discoloration and/or

deformation.

Additional Precautions

• When disposing of the packing carton

or cushioning material in which this unit

was packed, you must observe the waste

disposal regulations that apply to your

locality.

• When opening/closing the lid, please be

careful not to get your ngers pinched

between the movable part and the

unit. In places where small children are

present, make sure that an adult provides

supervision and guidance.

Intellectual Property Right

• Roland, BOSS are either registered

trademarks or trademarks of Roland

Corporation in the United States and/or

other countries.

• Company names and product names

appearing in this document are registered

trademarks or trademarks of their

respective owners.

WARNING

Do not disassemble or modify by yourself

Do not carry out anything unless

you are instructed to do so in the

owner’s manual. Otherwise, you risk

causing malfunction.

Do not repair or replace parts by yourself

Be sure to contact your dealer, a

Roland service center, or an ocial

Roland dealer.

For a list of Roland service centers

and ocial Roland dealers, refer to the Roland

website.

Do not place in an unstable location

Otherwise, you risk injury as the

result of the unit toppling over or

dropping down.

WARNING

Do not use or store in the following types

of locations

• Subject to temperature extremes

(e.g., direct sunlight in an

enclosed vehicle, near a heating

duct, on top of heat-generating

equipment); or are

• Damp (e.g., baths, washrooms,

on wet oors); or are

• Exposed to steam or smoke; or are

• Subject to salt exposure; or are

• Exposed to rain; or are

• Dusty or sandy; or are

• Subject to high levels of vibration and

shakiness; or are

• Placed in a poorly ventilated location.

Be cautious to protect children from injury

Always make sure that an adult is

on hand to provide supervision and

guidance when using the unit in

places where children are present,

or when a child will be using the unit.

WARNING

Do not drop or subject to strong impact

Otherwise, you risk causing damage

or malfunction.

CAUTION

Avoid climbing on top of the unit, or

placing heavy objects on it

Otherwise, you risk injury as the

result of the unit toppling over or

dropping down.

Take care so as not to get ngers pinched

When handling the following

moving parts, take care so as not

to get ngers, toes, etc., pinched.

Whenever a child uses the unit,

an adult should be on hand to provide

supervision and guidance.

• Lid

• If you use a knife to cut the holding pad,

take care not to injure yourself.

• When trimming the cutouts, take care that

the knife does not damage nearby devices.

For details on the BCB-30X, refer to the Boss website.

https://www.boss.info/global/

products/bcb-30x/

For BOSS cables, refer to the BOSS website (Accessories).

https://www.boss.info/global/

categories/accessories/boss_cables/

*5100074667-02*

Produkt Specifikationer

Mærke:	Boss
Kategori:	Modtager
Model:	BCB-30X

Har du brug for hjælp?

Hvis du har brug for hjælp til Boss BCB-30X stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Modtager Boss Manualer

5 September 2024

3 September 2024

28 August 2024

20 August 2024

Boss Chaos Exxstreme CX650 Manual

19 August 2024

Boss BE7ACP-SD Manual

18 August 2024

17 August 2024

17 August 2024

16 August 2024

16 August 2024

Modtager Manualer

Nyeste Modtager Manualer

Audibax MA2500T DSP Manual

3 November 2024

Audibax MA4500T DSP Dante Manual

3 November 2024

Audibax PA2250T Manual

2 November 2024

Audibax MA2500T DSP Dante Manual

2 November 2024

Audibax Lexa 30 Manual

2 November 2024

Audibax Akron 4-4800 Manual

2 November 2024

Audibax Zone 240 BT Manual

2 November 2024

Audibax Dayton 120 BT Manual

2 November 2024

Audibax Zone 360 BT Manual

2 November 2024

Audibax Kansas Manual

2 November 2024