Boss BCB-90X Manual

Boss Modtager BCB-90X

Læs nedenfor 📖 manual på dansk for Boss BCB-90X (1 sider) i kategorien Modtager. Denne guide var nyttig for 14 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF
Side 1/1
* 5100074666- 01*
© 2020 Roland Corporation
English
Owner’s Manual
BCB-90X Pedal Board Before using this unit, carefully read “USING THE UNIT SAFELY” and “IMPORTANT NOTES” (the leaet “Read Me First” and the
Owner’s Manual). After reading, keep the document(s) where it will be available for immediate reference.
WARNING
Use only the supplied AC adaptor and
the correct voltage
Be sure to use only the AC
adaptor supplied with the unit.
Also, make sure the line voltage
at the installation matches
the input voltage specied on the AC
adaptor’s body. Other AC adaptors may
use a dierent polarity, or be designed
for a dierent voltage, so their use could
result in damage, malfunction, or electric
shock.
Connect only specied devices to DC
OUT jack
Connect only the specied
device (the specied devices
described in “Making
Connections” of this document)
to the DC OUT jack (which provide a
supply of power).
Use only the supplied power cord
Use only the attached power
cord. Also, the supplied power
cord must not be used with any
other device.
CAUTION
Take care so as not to get ngers
pinched
When handling the following
moving parts, take care so as not
to get ngers, toes, etc., pinched.
Whenever a child uses the unit, an adult
should be on hand to provide supervision
and guidance.
• Lid
• If you use a knife to cut the holding
pad, take care not to injure yourself.
• When cutting the cutouts, take care
not to damage nearby equipment with
the knife.
Eect Unit Installation Examples
By cutting the included holding pad to match the shape of the products that you want to install, you can hide the cabling and create a clean layout.
Example 1 Example 3 Example 2
USING THE UNIT SAFELY
Used for instructions intended to alert the
user to the risk of injury or material
damage should the unit be used
improperly.
* Material damage refers to damage or
other adverse effects caused with
respect to the home and all its
furnishings, as well to domestic animals
or pets.
Used for instructions intended to alert the
user to the risk of death or severe injury
should the unit be used improperly.
The symbol alerts the user to things that must be
carried out. The specific thing that must be done is
indicated by the design contained within the circle. In the
case of the symbol at left, it means that the power-cord
plug must be unplugged from the outlet.
The symbol alerts the user to important instructions or
warnings.The specific meaning of the symbol is
determined by the design contained within the triangle. In
the case of the symbol at left, it is used for general
cautions, warnings, or alerts to danger.
The symbol alerts the user to items that must never be
carried out (are forbidden). The specific thing that must
not be done is indicated by the design contained within
the circle. In the case of the symbol at left, it means that
the unit must never be disassembled.
About WARNING and CAUTION Notices About the Symbols
ALWAYS OBSERVE THE FOLLOWING
IMPORTANT NOTES
Power Supply
• Place the AC adaptor so the side with
the indicator faces upwards. The
indicator will light when you plug the
AC adaptor into an AC outlet.
Placement
• Depending on the material and
temperature of the surface on which
you place the unit, its rubber feet may
discolor or mar the surface.
Additional Precautions
• When disposing of the packing carton
or cushioning material in which this
unit was packed, you must observe the
waste disposal regulations that apply to
your locality.
• Do not use connection cables that
contain a built-in resistor.
• When opening/closing the lid, please be
careful not to get your ngers pinched
between the movable part and the
unit. In places where small children
are present, make sure that an adult
provides supervision and guidance.
Intellectual Property Right
• Roland, BOSS are either registered
trademarks or trademarks of Roland
Corporation in the United States and/or
other countries.
• Company names and product names
appearing in this document are
registered trademarks or trademarks of
their respective owners.
Do It Yourself 1 (Cutting the Holding Pad)
When installing stompboxes, you can save layout time by using the existing pre-cuts in the holding pad to remove unneeded
portions.
The cutouts at the left and right of the holding pad indicate the positions that are above the cable guides (places to conceal
long cables) when it is placed in the case. Use these cutouts when deciding where to position your eect units, and cut the
holding pad so that cables can be accommodated neatly when the eect units are installed.
* If you use a knife to cut the holding pad, take care not to injure yourself.
* When cutting the cutouts, take care not to damage nearby equipment with the knife.
Cable guide
Holding pad
cutouts
Do It Yourself 2 (Keeping the Cables Neat)
If the power supply parallel cable and long patch cables are aligned with the cable guide, the cables can be managed neatly.
Cable guide
MEMO
To detach the lid, lift it to the position shown in the illustration, and then press in the direction of the arrow.
Making Connections
* To prevent malfunction and equipment failure, always turn down the volume, and turn o all the units before making any connections.
* The PSB-1U adaptor can supply 2,000 mA of current. Before you make connections, verify that the total current consumption of all eect
units does not exceed this value.
* After you have made connections correctly, you must observe the following procedure when turning on the power Malfunctions or speaker
damage might occur if you fail to observe the correct order.
Main Specications
Connectors
INPUT Jack (1/4” phone type)
SEND Jack (1/4” phone type)
RETURN A/B Jack (1/4” phone type)
OUTPUT A/B Jack (1/4” phone type)
DC IN/OUT Jack
Power Supply DC 9V: AC adaptor
Dimensions 661 (W) x 383 (D) x 113 (H) mm
26-1/16 (W) x 15-1/8 (D) x 4-1/2 (H) inches
Inside
dimensions
72 (H) mm
2-7/8 (H) inches
Weight 3.3 kg
7 lbs 5 oz
Accessories
AC adaptor (PSB-1U + AC Cable Set)
10-pin parallel DC cable x 1
Pre-cut insert pad (thickness: 10 mm) x 1
Owner’s Manual
Leaet “USING THE UNIT SAFELY”
Option
(sold separately)
AC adaptor (PSB-1U)
Pre-cut insert pad (thickness: 10 mm)
* This document explains the specications of the product at the time that the document was issued. For the latest information, refer to the
Roland website.
* When purchasing an AC adaptor, be sure to specify the adaptor (from the list that follows) that is designed for the region in which it will be
used, and the voltage supplied there. (PSB-120/PSB-120TW/PSB-230EU/PSB-230UK/PSB-240A)(sets containing PSB-1U and power cord)
When turning the power on: Power-on the amp last.
When turning the power o: Power-o the amp rst..
For the USA
SUPPLIER’S DECLARATION OF CONFORMITY
Compliance Information Statement
Model Name :
Type of Equipment :
Responsible Party :
Address :
Telephone :
BCB-90X
CARRYING BOX
Roland Corporation U.S.
5100 S. Eastern Avenue Los Angeles, CA 90040-2938
(323) 890-3700
IMPORTANT: THE WIRES IN THIS MAINS LEAD ARE COLOURED IN ACCORDANCE WITH THE FOLLOWING CODE.
BLUE:
BROWN:
As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying
the terminals in your plug, proceed as follows:
The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured BLACK.
The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured RED.
Under no circumstances must either of the above wires be connected to the earth terminal of a three pin plug.
NEUTRAL
LIVE
For the U.K.
For details on the BCB-90X, refer to the BOSS website.
https://www.boss.info/global/
products/bcb-90x/
For BOSS cables, refer to the BOSS website (Accessories).
https://www.boss.info/global/
categories/accessories/boss_
cables/
1

Produkt Specifikationer

Mærke: Boss
Kategori: Modtager
Model: BCB-90X

Har du brug for hjælp?

Hvis du har brug for hjælp til Boss BCB-90X stil et spørgsmål nedenfor, og andre brugere vil svare dig


Modtager Boss Manualer

Boss

Boss AR1600.2 Manual

5 September 2024
Boss

Boss AR1500M Manual

3 September 2024
Boss

Boss BP-1W Manual

28 August 2024
Boss

Boss BECPA9W Manual

20 August 2024
Boss

Boss Chaos Exxstreme CX650 Manual

19 August 2024
Boss

Boss BE7ACP-SD Manual

18 August 2024
Boss

Boss CXXM1250 Manual

17 August 2024
Boss

Boss AR1200.2 Manual

17 August 2024
Boss

Boss PD4000 Manual

16 August 2024
Boss

Boss PH2KD.4 Manual

16 August 2024

Modtager Manualer

Nyeste Modtager Manualer

Audibax

Audibax MA2500T DSP Manual

3 November 2024
Audibax

Audibax MA4500T DSP Dante Manual

3 November 2024
Audibax

Audibax PA2250T Manual

2 November 2024
Audibax

Audibax MA2500T DSP Dante Manual

2 November 2024
Audibax

Audibax Lexa 30 Manual

2 November 2024
Audibax

Audibax Akron 4-4800 Manual

2 November 2024
Audibax

Audibax Zone 240 BT Manual

2 November 2024
Audibax

Audibax Dayton 120 BT Manual

2 November 2024
Audibax

Audibax Zone 360 BT Manual

2 November 2024
Audibax

Audibax Kansas Manual

2 November 2024