Boss GA-FC Manual

Boss Modtager GA-FC

Læs nedenfor 📖 manual på dansk for Boss GA-FC (2 sider) i kategorien Modtager. Denne guide var nyttig for 12 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/2

GA-FC Owner’s Manual

Connecting the GA-FC

Operating the GA-FC

Use a stereo cable to connect the foot controller to the GA-FC jack of your amp.

* Always use a stereo cable.

* Use cables that do not contain resistors.

* This instrument is equipped with TRS type jacks. Wiring diagrams for these jacks

are shown below.

TIP

RING

SLEEVE (GND)

USING THE UNIT SAFELY

Before using this unit, carefully read the sections entitled: “USING THE UNIT SAFELY” and “IMPORTANT NOTES.” These sections provide important information concerning the

proper operation of the unit. Additionally, in order to feel assured that you have gained a good grasp of every feature provided by your new unit, Owner’s manual

should be read in its entirety. The manual should be saved and kept on hand as a convenient reference.

Used for instructions intended to alert the

user to the risk of injury or material

damage should the unit be used

improperly.

* Material damage refers to damage or

other adverse effects caused with

respect to the home and all its

furnishings, as well to domestic animals

or pets.

Used for instructions intended to alert the

user to the risk of death or severe injury

should the unit be used improperly.

The symbol alerts the user to things that must be

carried out. The specific thing that must be done is

indicated by the design contained within the circle. In the

case of the symbol at left, it means that the power-cord

plug must be unplugged from the outlet.

The symbol alerts the user to important instructions or

warnings.The specific meaning of the symbol is

determined by the design contained within the triangle. In

the case of the symbol at left, it is used for general

cautions, warnings, or alerts to danger.

The symbol alerts the user to items that must never be

carried out (are forbidden). The specific thing that must

not be done is indicated by the design contained within

the circle. In the case of the symbol at left, it means that

the unit must never be disassembled.

About WARNING and CAUTION Notices About the Symbols

ALWAYS OBSERVE THE FOLLOWING

WARNING

Do not disassemble or modify by yourself

Do not open or perform any internal

modications on the unit.

Do not repair or replace parts by yourself

Do not attempt to repair the unit, or

replace parts within it (except when this

manual provides specic instructions

directing you to do so). Refer all servicing

to your retailer, the nearest Roland

Service Center, or an authorized Roland

distributor, as listed on the “Information”

page.

Do not use or store in the following types of locations

• Subject to temperature extremes (e.g.,

direct sunlight in an enclosed vehicle,

near a heating duct, on top of heat-

generating equipment); or are

• Damp (e.g., baths, washrooms, on wet

oors); or are

• Exposed to steam or smoke; or are

• Subject to salt exposure; or are

• Humid; or are

• Exposed to rain; or are

• Dusty or sandy; or are

• Subject to high levels of vibration and

shakiness.

Do not place in an unstable location

Make sure you always have the unit

placed so it is level and sure to remain

stable. Never place it on stands that could

wobble, or on inclined surfaces.

WARNING

Don’t allow foreign objects or liquids to enter unit; never

place containers with liquid on unit

Never allow foreign objects (e.g.,

ammable objects, coins, wires) or liquids

(e.g., water or juice) to enter this product.

Doing so may cause short circuits, faulty

operation, or other malfunctions.

Turn o the unit if an abnormality or malfunction occurs

Immediately turn the amplier o, and

request servicing by your retailer, the

nearest Roland Service Center, or an

authorized Roland distributor, as listed on

the “Information” page when:

• Objects have fallen into, or liquid has

been spilled onto the unit; or

• If smoke or unusual odor occurs; or

• The unit has been exposed to rain (or

otherwise has become wet); or

• The unit does not appear to operate

normally or exhibits a marked change in

performance.

Adults must provide supervision in places where

children are present

When using the unit in locations where

children are present, be careful so no

mishandling of the unit can take place. An

adult should always be on hand to provide

supervision and guidance.

Do not drop or subject to strong impact

Protect the unit from strong impact.

(Do not drop it!)

CAUTION

Manage cables for safety

Try to prevent cords and cables from

becoming entangled. Also, all cords and

cables should be placed so they are out of

the reach of children.

Avoid climbing on top of the unit, or placing heavy

objects on it

Never climb on top of, nor place heavy

objects on the unit.

Disconnect everything before moving the unit

Disconnect all cords coming from external

devices before moving the unit.

IMPORTANT NOTES

Placement

• This device may interfere with radio and television

reception. Do not use this device in the vicinity of

such receivers.

• When moved from one location to another where

the temperature and/or humidity is very dierent,

water droplets (condensation) may form inside

the unit. Damage or malfunction may result if you

attempt to use the unit in this condition. Therefore,

before using the unit, you must allow it to stand

for several hours, until the condensation has

completely evaporated.

• Depending on the material and temperature of the

surface on which you place the unit, its rubber feet

may discolor or mar the surface.

You can place a piece of felt or cloth under the

rubber feet to prevent this from happening. If you

do so, please make sure that the unit will not slip or

move accidentally.

• Swiftly wipe away any liquid that spills on the unit

using a dry, soft cloth.

Maintenance

• For everyday cleaning wipe the unit with a soft,

dry cloth or one that has been slightly dampened

with water. To remove stubborn dirt, use a cloth

impregnated with a mild, non-abrasive detergent.

Afterwards, be sure to wipe the unit thoroughly

with a soft, dry cloth.

• Never use benzine, thinners, alcohol or solvents of

any kind, to avoid the possibility of discoloration

and/or deformation.

Additional Precautions

• Use a reasonable amount of care when using

the unit’s switches; and when using its jacks

and connectors. Rough handling can lead to

malfunctions.

• When disconnecting all cables, grasp the connector

itself—never pull on the cable. This way you will

avoid causing shorts, or damage to the cable’s

internal elements.

• When you need to transport the unit, package it

in the box (including padding) that it came in, if

possible. Otherwise, you will need to use equivalent

packaging materials.

• Use only the specied expression pedal (Roland EV-

5, BOSS FV-500L, BOSS FV-500H; sold separately).

By connecting any other expression pedals, you risk

causing malfunction and/or damage to the unit.

• Roland and BOSS are either registered trademarks

or trademarks of Roland Corporation in the United

States and/or other countries.

• Company names and product names appearing

in this document are registered trademarks or

trademarks of their respective owners.

Main Specications

BOSS GA-FC: Foot Controller

Controls Switch x 6

Connectors EXP PEDAL jack (1/4-inch TRS phone type) x 2

FOOT CONTROL jack (1/4-inch TRS phone type)

Dimensions 392 (W) x 81 (D) x 49 (H) mm

15-7/16 (W) x 3-3/16 (D) x 1-15/16 (H) inches

Weight 1.0 kg / 2 lbs 4 oz

Accessories Owner’s Manual, Foot Controller Cable

Options Expression Pedal (Roland EV-5, BOSS FV-500L, BOSS FV-500H)

* In the interest of product improvement, the specications and/or appearance of this unit are subject to change without prior notice. For EU Countries

For the USA

FEDERAL COMMUNICATIONS COMMISSION

RADIO FREQUENCY INTERFERENCE STATEMENT

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment

generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning

the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:

– Reorient or relocate the receiving antenna.

– Increase the separation between the equipment and receiver.

– Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

– Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment requires shielded interface cables in order to meet FCC class B limit.

Any unauthorized changes or modications not expressly approved by the party responsible for compliance could void the user’s

authority to operate the equipment.

For Canada

CAN ICES-3 (B)/NMB-3 (B)

Roland Corporation

2036-1 Nakagawa, Hosoe-cho, Kita-ku, Hamamatsu, Shizuoka 431-1304, JAPAN

Roland Corporation

ENA 23 Zone 1 nr. 1620 Klaus-Michael Kuehnelaan 13, 2440 Geel, BELGIUM

Importer:

Manufacturer:

For EU Countries

Roland Corporation

2036-1 Nakagawa, Hosoe-cho, Kita-ku, Hamamatsu, Shizuoka 431-1304, JAPAN

Roland Europe Group Limited

Hive 2, 1530 Arlington Business Park, Theale, Reading, Berkshire. RG7 4SA United Kingdom

Importer:

Manufacturer:

For the U.K.

产品中有害物质的名称及含量

环保使用期限

󴂸󷼲󴉓󱜅󳨛󾙓󾙓󾙕󾙘󾙖󵯔󸇛󲰬󶯢󱭧

󷼲󶀱󸘃󴁸󲱛󵒜󸟰󲍨󸘃󸻉󱘎󳡇󴁸󲎑󸟰󴃮󳸃󱓩󵯔󱺂󹂩󲎑󲍨󾙔󾙘󾙗󾙙󾙔󸇛󲰬󵯔󹠠󹂩󸅲󴦔󱗵󱒷

󷼲󶀱󸘃󴁸󲱛󵒜󸟰󷆹󲴞󲍨󸘃󸻉󱘎󵯔󴆨󱒪󲎑󸟰󴃮󳸃󱓩󵯔󱺂󹂩󸡤󱬕󾙔󾙘󾙗󾙙󾙔󵯔󹠠󹂩󸅲󴦔

󽙏󱘡󱓐󱸯󲍨󴟾󲙓󽙓󴉐󳨛󲰴󹠏󳖐󱪦󲳳󱒶󷼲󱓩󳡳󾛒󾛓󵯔󳢸󴂼󱶫󲋶󸱞󷼇󸱞󱒪󴠁󸘒󳻛󽙐



󴟾󴇾 󸳁󵥌󱕨󲍨󱓩󲌢󲌢󱩣󹙷 󵯔󵥟󲮚 󱖓󱽢󽙓󷼲󶀱󵚦󱝫󱛔󵥌󴂠󹠠󵯔󳅸󳶹󳐋 󱿺 󱝵󳓽 󳡇󸘱󵚦󱝫󱛔󵥌

󴂠󹠠󳼎󳥸󲍨󷆦󱭧󸴓󳺝󸡐󵯔󸇛 󴂠󹠠󱩣󽙓󱖓󱽢󱓩 󵯔󴁸 󵒜󸟰󱒹󷆻󳊷󸡐󵚦󲖀󴧅󴆭󽙓󱒹󱙃󲳳󲰬 󳡇󱺂 󲱛

󱖶󸩒󸟪󱖓󸴓󳟸󱓞󹂧󵯔󱒹󷋣󳍧󱽰

󵚦󱝫󱛔󵥌󴂠󹠠󱗃󲍨 󵊉󱖓󱽢󱛔󵥌󸘒󳻛󱔲󽙓󴟽󵻗󱛔󵥌󱖓󱽢󵯔󴄄󱘎󱒷󸷸 󳡪󴁸󳵿

󱒹󳌯󵯔󱛔󵥌󽙓󲴉󱙃󲳸󷆻󴁸󲱛󵒜󸟰󴩗󴸡󵯔󱵨󹡄

󸻉󱘎󱹔󶆃

󴁸󲱛󵒜󸟰

󲙻󲙁󽙏󲙁󱚏󽙐

󵥟󲮚󸻉󱘎󽙏󱵦󱭨󵥟󸤀󴄰󶑂󽙐

󹠎󱘎󽙏󵥟󴴰󶮋󱖍󴬓󸳁󸾆󽗉󶑂󽙐

󹘼󽙏󽙐 󴧁󽙏󽙐 󹛁󽙏󽙐 󱩁󱘐󹙣

󽙏󽙏󽙐󽙐 󲚃󴵲󶹎󷏬

󽙏󽙐 󲚃󴵲󱕦󷏬󹀫

󽙏󽙐



有关产品中所含有害物质的说明

󴂸󸠌󳸃 󴂸󱨾󱸻󱖓󱽢󱓩󲵊 󳡇󱺂 󲰬󴁸󲱛 󲰈 󱗵󵯔󵒲 󵒜󸟰󱷷󱩎 󱨴󳒋󱕡 󸘒󳻛

󴂸󸠌󳸃󸳁󵥌󱕨󾙔󾙒󾙒󾙙󳅸󾙕󴁷󾙓󳺝 󱹖󴂸󱨾󱸻󱗵 󳡇󱭧󸴓󵯔󱖓󱽢

This product is a foot controller for amp products that are equipped with a GA-FC jack. The printing on the panel indicates the functions for a KATANA amp.

If you are using this foot controller with a product other than a KATANA amp, please ax the label sheet that is included with your amp.

GA-FC jack

When used together with a KATANA amp, you can use the GA-FC to switch channels or turn eects on/o.

* For details on operation, refer to the owner's manual of your amp.

Using the expression pedals

When used together with a KATANA amp, connecting an expression pedal (Roland EV-5, BOSS FV-500L, BOSS FV-500H: sold separately) lets you use the

pedal to control volume or other aspects of the sound.

* For details on operation, refer to the owner’s manual of your amp.

* Use only the specied expression pedal (Roland EV-5, BOSS FV-500L, BOSS FV-500H; sold separately). By connecting any other expression pedals, you risk

causing malfunction and/or damage to the unit.

Using the footswitches