BOYA BY-M1000 Manual

BOYA Mikrofon BY-M1000

Læs nedenfor 📖 manual på dansk for BOYA BY-M1000 (2 sider) i kategorien Mikrofon. Denne guide var nyttig for 15 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF
Side 1/2
BY-M1000
Large Diaphragm Condenser Microphone
OmniCardioid
Bidirectional
Instruction Manual
Thanks for purchasing BOYA BY-M1000!
• BY-M1000 condenser microphone
• Studio-grade pop shield
• Shockmount
• 3m(10ft) balanced XLR cable
3. Mounted the supplied pop filter in front of microphone.
4. Insert supplied XLR cable to microphone
Instruction:
1. Mount BY-M1000 on 3/8" and 5/8" microphone stands
or tripods.
2. Rotate locking knob to adjust microphone fits your
position.
Note:
When changing the mic position, always be sure to loosen
the adjustment knob first to ensure you do not damage
the shock mount.
How to use it
Note:
When recording any sound source, whether it be vocals,
instruments or anything else, always spend time
experimenting with microphone placement to ensure you
are picking up the best possible sound. Adjust the
microphone position as many times as you need to
achieve your demand.
General Functions
- Polar Patterns
Omni-directional
Bi-directional
- High-Pass Filter
- A -10 dB Pad Switch
Contents:
The BOYA BY-M1000 is a 34mm(1.3") diaphragm
condenser microphone, with sturdy all-metal housing,
three selectable polar patterns, -10dB switch design,
BOYA BY-M1000 is suited for capturing instruments and
vocals in project and professional recording applications,
such as singer, songwriters, podcasters, voiceover
artists, field recorders, and home studio recordings.
Additionally, the microphone offers a 20 Hz to 20 kHz
frequency response for accurately reproducing audio
signal in a variety of ranges.
Features Polar Pattern
Frequency Response
• Gold-sputtered diaphragm
• Broadcast-quality condenser microphone
• Cardioid, Omnidirectional and Bidirectional polar patterns
• Wide frequency range and ultra low noise
• Off-axis rejection for clean recordings
• Included shockmount & pop filter
• Controlled by low-cut filter switch
• 0dB ,-10 dB Pad switch
• Electrically balanced output
• 3-Pin XLR plug
• 24V or 48V phantom power
• All-metal housing
• Included 3/8" and 5/8" thread
The microphone uses standard 24V or 48V phantom
power, which is supplied through the standard XLR
connector.
Cardioid
The cardioid polar pattern is focusing audio capture in
front of the capsule, minimizes unwanted ambient
sound from the other sides and back of the microphone.
This polar pattern is suitable for such situations when
you want to pick up specific sund sources, such as
recording vocals, guitar, pianos, stringed instruments,
and more.
The omni-directional polar pattern will in principle pick up
sound equally from all directions. Whether the sound
resource from the front, the side, or even back, the
microphone will record the signals all with equal gain. This
polar pattern can be very useful in applications where
sound needs to be recorded from multiple directions, such
as a musical performance where there is a band of
musical instruments in front and a choir singing behind.
Bidirectional polar pattern is figure-of-eight pattern and
picks up sound equal sensitivity from two opposite
directions, front and back of the microphone, and with
low sensitivity from the sides. This polar pattern is best
suited for interview, Q&A lecture or presentation,
acoustic instruments, and for live recordings of jazz and
acoustic groups.
A low-cut filter at 150 Hz allows you to eliminate low
frequency hum and other low-frequency noises.
A -10 dB pad switch provides more headroom when
capturing transient signals that may otherwise cause
peak distortion.
Specifications:
Acoustic Principle:
Polar Pattern:
Diaphragm:
Frequency Response:
Sensitivity:
SN:
Output Impedance:
Power Requirement:
Cable Length:
Dimensions:
Weight:
Condenser
Cardioid, Omnidirectional, Bidirectional
34mm(1.3")
20– 20,000Hz
-33±3dB (0dB=1V/Pa @ 1KHz)
80dB and more
200 Ohm
24V or 48V Phantom
3m(10ft)
207 x 115 x 185mm(8.1” x 4.5” x 7.3”)
812g (29 oz)
www.boya-mic.com
SHENZHEN JIAYZ PHOTO INDUSTRIAL., LTD.
The BOYA logo is a trademark which is registered and owned by
Shenzhen Jiayz Photo Industrial., Ltd.
COPY RIGHT 2010-2020
Email: sales@boya-mic.com
www.boya-mic.com / www.jiayz.com
Maintaining Your Microphone
• Keep your microphone away from dust, moisture, or water.
• To clean the housing, wipe with a dry micro-fiber cloth to
remove dust.
• Store your microphone in the included pouch to protect it
from dirt and dust.
Important Safety Information
• Make sure that you follow all safety notes.
• Keep these instructions for use in a safe place. If you sell
the equipment or pass it on to someone else, you should
also pass on these instructions for use.
Marking on the devices
Danger of fire and short-circuit
Waste disposal and protection of the environment
Electric and electronic appliances, as well as batteries, must
not be disposed of together with domestic waste. The user is
legally obliged to return electric and electronic appliances as
well as batteries to specially set up public collecting points or
the sales outlet once they have reached the end of their service
life. Details are regulated by national law. The symbol on the
product, the instructions for use, or the packaging refers to
these provisions. The recycling of waste equipment/batteries is
an important contribution to the protection of our environment.
• Do not operate the device with wet hands.
• Clean the equipment only in the way described in Maintaining
Your Microphone.
• Take care to avoid dropping the equipment. Make sure that
the device is properly fastened and reliably mounted. If the
device has been dropped, have it inspected by a skilled
technician before you switch it on again.
• Should the equipment be damaged or defective, or if you
notice a scorching smell, remove the batteries immediately.
Do not operate the device with a damaged housing and do
not repair the device yourself. Have the device only repaired
by a skilled service person.
Note:
The “BOYA” Logo on the face of the BY-M1000 indicates
the front of the microphone, and the pickup area of the
capsule. The “BOYA” Logo should always be facing towards
the sound source that you wish to record.

Produkt Specifikationer

Mærke: BOYA
Kategori: Mikrofon
Model: BY-M1000

Har du brug for hjælp?

Hvis du har brug for hjælp til BOYA BY-M1000 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Mikrofon BOYA Manualer

BOYA

BOYA BY-V4 Manual

30 September 2024
BOYA

BOYA BY-WM3T Manual

30 September 2024
BOYA

BOYA BY-PM700 PRO Manual

29 September 2024
BOYA

BOYA BY-WM4 PRO-K6 Manual

9 September 2024
BOYA

BOYA BY-DM500 Manual

4 September 2024
BOYA

BOYA link A1 Manual

1 September 2024
BOYA

BOYA link A2 Manual

1 September 2024
BOYA

BOYA BY-XM6-K2 Manual

1 September 2024
BOYA

BOYA BY-XM6-K1 Manual

1 September 2024
BOYA

BOYA link Manual

1 September 2024

Mikrofon Manualer

Nyeste Mikrofon Manualer

Schoeps

Schoeps MK 41 Manual

5 November 2024
Audibax

Audibax AWM 403 TD Manual

4 November 2024
Audibax

Audibax AWM 202 Manual

3 November 2024
Audibax

Audibax Oslo 1600 Manual

3 November 2024
Audibax

Audibax Berlin 1800 Manual

3 November 2024
Audibax

Audibax Free Head UHF Manual

3 November 2024
Audibax

Audibax Dublin 3000 Manual

2 November 2024
Audibax

Audibax Mic 900 Manual

2 November 2024
Audibax

Audibax AWM 402 Manual

2 November 2024
Audibax

Audibax AWM 404 TD Manual

2 November 2024