Britax-Römer Discovery SL Manual

Britax-Römer Autostol Discovery SL

Læs nedenfor 📖 manual på dansk for Britax-Römer Discovery SL (9 sider) i kategorien Autostol. Denne guide var nyttig for 20 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/9
01 02
07
11
13
03
05
04
Seat cushion
ISOFIT Locking arms
Belt guide (bright red)
ISOFIX insertion aids
ISOFIX attachment points (car)
Belt holder
01
02
03
04
05
06
07
Compartment for user manual
Adjustment belt
ISOFIT Adjustment button
Backrest
08
09
10
Headrest adjustment handle
11
Headrest
12
13
08
06
09
10
12
ISOFIT Locking button
www.britax.com
2. INTRODUCTION
We are pleased that you have chosen our
DISCOVERY SL
to accompany your
child safely through a new stage of his or her life.
In order to protect your child correctly, the
DISCOVERY SL
must always be
used and installed as described in these instructions.
If you have any further questions regarding its use, please feel free to contact us:
These instructions use the following symbols stated below:
Symbol Keyword Explanation
DANGER! Risk of severe personal injury
WARNING! Risk of minor personal injury
CAUTION! Risk of material damage
TIP: Useful notes
Instructions that follow a set sequence are numbered.
Example:
1. Press the button...
18
17
Belt guide colours
For better dierentiation, the two vehicle seat
belts are highlighted in dierent colours. The
diagonal seat belt 18 in dark red and the lap belt
17 in bright red. The colour of the belt guides
on the child safety seat follows the same colour
scheme.
4. USE IN THE VEHICLE
Please observe the instructions for using children's restraining systems in the operating instruc-
tions of your vehicle. ISOFIX anchoring systems (see type The seat can be used in vehicles with
list) and in vehicles with a
3-point belt
.
Please find the information on the seats approved for child safety classes 15 to seats of the weight
36kg operating instructions of your vehicle. in the
The is approved for two dierent methods of installation:DISCOVERY SL
Symbol Installation type Approval type Section
with the ISOFIT locking arms into the
ISOFIX fastening points in the vehicle.
Check the list of vehicle types.
semi-
universal
a)
9A
with the vehicle's 3-point seatbelt universal 9B
a)
This means that the child safety seat may only be used in vehicles that are listed in the
vehicle type list enclosed. This type list is consistently kept up to date. The latest version can
be obtained from us or from www.britax.com
You can use your child safety seat as follows:
In the direction of travel Yes
Against the direction of travel No 1)
with 2-point belt No
with 3-point belt2) Yes
with ISOFIX fastening points
(between seat surface and
backrest)
Yes
on front passenger seat
Yes
3)
on outer rear seat Yes
on centre rear seat (with3-point
belt)
Yes
4)
1) Use is permitted on a rearward-facing vehicle seat (e.g. in a van or minibus) only if the vehicle
seat is also approved for use by adults. The seat may not be in the area of eect of an airbag.
2) The safety belt must be approved to ECE R 16 or a comparable standard (see test label on
belt with an "E" or "e" in a circle).
3) If there is a front airbag: Slide the vehicle seat a long way back and refer to any instructions
in vehicle owner's manual.
4) Cannot be used if the vehicle seat is equipped with only a 2-point belt.
15-36 kg
3. APPROVAL
BRITAX RÖMER
Vehicle child seat
Testing and certification
In accordance with ECE* R 44/04
Group Body weight
DISCOVERY SL
II+III 15 to 36 kg
*ECE = European Standard for Child Safety Equipment
The child safety seat has been designed, tested and certified according
to the requirements of the European Standard for Child Safety Equipment
(ECER44/04). The seal of approval E (in a circle) and the approval number are
located on the orange approval label (sticker on the child safety seat).
DANGER! This approval will be invalidated if you make any modifications to
the child safety seat. Only the manufacturer is permitted to make
modifications to the child safety seat.
WARNING! Use the
DISCOVERY SL
exclusively for securing your child in your
vehicle. It is in no way suitable as a seat or toy in the home.
Never secure your child or the child safety seat with a 2-point DANGER!
belt. If you secure your child in the child seat with only a 2-point
belt, then in the event of an accident this may cause serious
injuries to your child, possibly resulting in death.
PAGE I
6. DISASSEMBLY AND DISPOSAL
1. PRODUCT OVERVIEW
1. Operate the release button of your vehicle seat buckle.
2. Pull out the diagonal belt from the dark red belt holder
06 on the headrest 12
Only for installation type A (ISOFIT):
3. Press the red ISOFIT locking button to release the
ISOFIT fastening 05 and pull out the ISOFIT locking
arm 04 . Repeat the procedure with the other ISOFIT
locking arm 04 .
4. Pull on the adjustment belt 09 until both ISOFIT
locking arms 04 are in the storage position.
ŹThe child safety seat can now be removed.
The child safety seat must always be DANGER!
secured when it is in the vehicle, even if no child is
being transported.
DISPOSAL:
Please observe the waste disposal regulations in your country.
Disposal of packaging Container for cardboard boxes
Seat cover Residual waste, thermal utilisation
Plastic parts
According to the labelling in the corresponding container
Metal parts Container for metals
Belt straps Container for polyester
buckle and tongue Residual waste
04
09
REMOVAL:
UNFASTENING YOUR CHILD:
1. To unfasten your child, use the release button of your vehicle seat buckle.
05
04
05
04
Removing the seat cover
1. Moving the headrest of the vehicle seat into the top
position.
2.
Unhook the cover hooks
20
on the rear of the backrest
13
.
3.
Remove the upper part of the cover.
4. Unhook the cover loops 21 at the bottom on the rear of
the backrest 13
5. Pull o the cover from the seat cushion 07 .
Removing the headrest cover
6.
Unhook the cover loops
21
on the back of the headrest
12
.
7.
Unhook the cover hooks
20
on the front of the backrest
13
8.
Pull o the cover of the headrest
12
.
ŹThe cover can now be washed.
Please observe the
instructions on the washing label of the cover:
Re-fitting the cover
Proceed in reverse order to put on the cover.
5. CARE AND MAINTENANCE
20
12
Please ensure that you only use the original BRITAX RÖMER replacement seat
covers, as the seat cover is an integral part of the child safety seat and fulfils
important functions to ensure the smooth operation of the system. You can obtain
replacement seat covers from your dealer.
• The cover can be removed and washed with a mild detergent in the delicates
programme of the washing machine (30 °C). Please observe the instructions on
the washing label of the cover.
• The plastic parts can be cleaned using soapy water. Do not use any caustic
cleaning agents (such as solvents).
DANGER! The child seat must not be used without the seat cover.
15 to 36 kg
(~4 to 12 years of age)
2000022003 15/06
GB
DISCOVERY SL
User instructions
20
21
21
Britax Childcare
Britax Römer
Kindersicherheit GmbH
Blaubeurer Strasse 71
D-89077 Ulm
Germany
T.: +49 (0) 731 9345-199/-299
F.: +49 (0) 731 9345-210
E.: service.de@britax.com
www.britax.com
Britax Childcare
Britax Exelsior Limited
1 Churchill Way West
Andover
Hampshire SP10 3UW
United Kingdom
T.: +44 (0) 1264 333343
F.: +44 (0) 1264 334146
E.:
service.uk@britax.com
www.britax.com


Produkt Specifikationer

Mærke: Britax-Römer
Kategori: Autostol
Model: Discovery SL

Har du brug for hjælp?

Hvis du har brug for hjælp til Britax-Römer Discovery SL stil et spørgsmål nedenfor, og andre brugere vil svare dig




Autostol Britax-Römer Manualer

Autostol Manualer

Nyeste Autostol Manualer