Brother DCP-353C Manual
Læs nedenfor 📖 manual på dansk for Brother DCP-353C (35 sider) i kategorien Printer. Denne guide var nyttig for 43 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere
Side 1/35
STEP 1
STEP 2
Setup is Complete!
Quick Setup Guide
Setting Up the Machine
Installing the Driver & Software
DCP-350C
DCP-353C
DCP-357C
DCP-560CN
Before you can use the machine, you must set up the hardware and install the software.
Please read this Quick Setup Guide for the correct setup procedure and installation instructions.
Keep this Quick Setup Guide, the User’s Guide and the supplied CD-ROM in a convenient place for
quick and easy reference at all times.
1
Symbols used in this guide
Warning
Caution
Improper Setup
Warnings tell you what to do to prevent
possible personal injury.
Cautions specify procedures you must
follow or avoid to prevent possible
damage to the machine or other objects.
Improper Setup icons alert you to
devices and operations that are not
compatible with the machine.
Note
User’s Guide, Software User’s Guide or
Network User’s Guide
Notes tell you how you should respond
to a situation that may arise or give tips
about how the current operation works
with other features.
Indicates reference to the User’s Guide,
Software User’s Guide or Network
User’s Guide which is on the CD-ROM
we have supplied.
Table of Contents
1
Getting Started
Carton components ...................................................................................................................................... 2
Control panel................................................................................................................................................ 3
STEP 1 –
Setting Up the Machine
Removing the protective parts ..................................................................................................................... 4
Loading paper .............................................................................................................................................. 4
Connecting the power cord .......................................................................................................................... 6
Choosing your language .............................................................................................................................. 6
Installing the ink cartridges........................................................................................................................... 7
Print quality check ........................................................................................................................................ 9
Setting the LCD contrast............................................................................................................................ 10
Setting the date and time ........................................................................................................................... 10
STEP 2 –
Installing the Driver & Software
Windows®
For USB Interface Users
(For Windows® 2000 Professional/XP/XP Professional x64 Edition/Windows Vista™) ........................... 14
Installing FaceFilter Studio.................................................................................................................... 17
For Network Interface Users (DCP-560CN only)
(For Windows® 2000 Professional/XP/XP Professional x64 Edition/Windows Vista™) ........................... 18
Installing FaceFilter Studio.................................................................................................................... 21
Macintosh®
For USB Interface Users
(For Mac OS® X 10.2.4 or greater) ........................................................................................................... 22
For Network Interface Users (DCP-560CN only)
(For Mac OS® X 10.2.4 or greater) ........................................................................................................... 25
For Network Users
BRAdmin Light utility (For Windows® users).............................................................................................. 28
Installing the BRAdmin Light configuration utility .................................................................................. 28
Setting your IP address, Subnet Mask and Gateway using BRAdmin Light ........................................ 28
BRAdmin Light utility (For Mac OS® X users) ............................................................................................ 29
Setting your IP address, Subnet Mask and Gateway using BRAdmin Light ........................................ 29
Installing the FaceFilter Studio Help
Instructions on how to install the FaceFilter Studio Help (For Windows® users) ....................................... 30
Installing the FaceFilter Studio Help ..................................................................................................... 30
Consumables
Replacement consumables ........................................................................................................................ 31
Ink cartridge .......................................................................................................................................... 31
Getting Started
2
1
1
Carton components
Carton components may vary from one country to another.
Save all packing materials and the carton in case for any reason you must ship your machine.
An interface cable is not a standard accessory. You need to purchase an appropriate USB 2.0 interface cable or
network cable.
USB cable
Please make sure you use a USB 2.0 cable that is no longer than 2 metres.
Your machine has a USB interface that is compatible with the USB 2.0 specification.
DO NOT connect the interface cable at this time.
Connecting the interface cable is done during the software installation process.
Network cable (DCP-560CN only)
Use a straight-through Category5 (or greater) twisted-pair cable for 10BASE-T or 100BASE-TX Fast Ethernet
Network.
Quick Setup Guide
CD-ROM
User’s Guide
Power Cord
Black (LC1000BK)
Yellow (LC1000Y)
Cyan (LC1000C)
Magenta (LC1000M)
The ink cartridges are on top of the paper tray. See Removing the protective parts on page 4
Ink Cartridges
Getting Started
3
2
Control panel
1 LCD (Liquid Crystal Display)
2 Number of Copies key
3 Menu keys
4 Start keys
5 Stop/Exit key
6 On/Off key
7 Ink Management key
8 Mode keys
9 Warning LED
For the details of the control panel, see Control panel overview in Chapter 1 of the User’s Guide.
Illustrations in this Quick Setup Guide are based on DCP-350C.
20:48
COPY
Quality
Enlarge/Reduce
Paper Type
Paper Size
Brightness
Normal
100%
Plain
A4
0
01
20:48
COPY
Quality
Enlarge/Reduce
Paper Type
Paper Size
Brightness
Normal
100%
Plain
A4
0
01
Setting Up the Machine
4
STEP 1
1
1 Removing the protective
parts
1Remove the protective tape and film covering
the scanner glass.
2Remove the foam bag (1) containing the ink
cartridges from on top of the paper tray.
Improper Setup
DO NOT connect the interface cable.
Connecting the interface cable is done during
the software installation process.
2 Loading paper
You can load up to 100 sheets of 80 g/m2
paper.
For details, see Acceptable paper and other
media in Chapter 2 of the User’s Guide.
1Pull the paper tray completely out of the
machine and lift the output paper tray cover (1).
2Press and slide the paper side guides (1) and
paper length guide (2) to fit the paper size.
1
1
1
2
Setting Up the Machine
5
3Fan the stack of paper well to avoid paper jams
and misfeeds.
4Gently put the paper into the paper tray print
side down and top edge first.
Check that the paper is flat in the tray.
Note
When you use Legal size paper, press and hold
the universal guide release button (1) as you slide
out the front of the paper tray.
5Gently adjust the paper side guides with both
hands to fit the paper.
Make sure that the paper guides touch the
edges of the paper.
Note
Be careful that you do not push the paper in too
far; it may lift at the back of the tray and cause
paper feed problems.
6Close the output paper tray cover (1).
7Slowly push the paper tray completely into the
machine.
1
Setting Up the Machine
6
STEP 1
8While holding the paper tray in place, pull out
the paper support until it clicks, and then
unfold the paper support flap .
Note
Do not use the paper support flap for Legal size
paper.
Note
You can use the photo paper tray which is located
on the top of the paper tray to print on photo
10×15 cm and photo L size paper.
For details, see Loading photo paper in Chapter 2
of the User’s Guide.
3 Connecting the power cord
1Connect the power cord.
Improper Setup
DO NOT connect the interface cable.
Connecting the interface cable is done during
the software installation process.
Warning
The machine must be fitted with an earthed plug.
Note
The control panel warning LED will stay on until
you have installed the ink cartridges.
4 Choosing your language
1After connecting the power cord, the LCD
shows:
Select Language
English
Français
Deutsch
Nederlands
Italiano
Press a b or to choose your language and
press OK.
2Choose Yes or No and press OK.
English
Yes
No
If you set the wrong language, you can
change the language after setting the date
and time. (For details, see Changing LCD
language in Appendixes B of the User’s
Guide.)
Setting Up the Machine
7
5 Installing the ink cartridges
Warning
If ink gets in your eyes, wash them out with water
at once, and if irritation occurs consult a doctor.
1Make sure that the power is turned on.
The LCD shows:
No Cartridge
Black
Yellow
Cyan
Magenta
2Open the ink cartridge cover (1).
3Pull all the lock release levers down and
remove the yellow protective part (1).
Note
Do not throw away the yellow protective part. You
will need it if you transport the machine.
4Take out the ink cartridge.
5Carefully remove the protective yellow cap (1).
Improper Setup
DO NOT touch the area shown in the
illustration below.
Note
If the protective yellow cap comes off when you
open the bag, the cartri be damaged.dge will not
1
1
1
Setting Up the Machine
8
STEP 1
6Install each ink cartridge in the direction of the
arrow on the label.
Take care to match the colour of the lock
release lever (1) with the cartridge colour (2),
as shown in the diagram below.
7Lift each lock release lever and gently push it
until it clicks, and then close the ink cartridge
cover.
Note
If the LCD prompts you to re-insert the ink
cartridge correctly, after you install the ink
cartridges, check that the ink cartridges are
installed correctly.
The first time the ink cartridges are installed the
machine prepares and cleans the ink tube
system. This initial process will take more time
than a normal cleaning cycle but will happen
only once.
The LCD shows:
Cleaning
Preparing System
Approx 4 Minutes
Caution
• DO NOT take out ink cartridges if you do not need
to replace them. If you do so, it may reduce the ink
quantity and the machine will not know the
quantity of ink left in the cartridge.
• DO NOT shake the ink cartridges. If ink stains your
skin or clothing, wash with soap or detergent at
once.
• DO NOT repeatedly insert and remove the
cartridges. If you do so, ink may seep out of the
cartridge.
• If you mix the colours by installing an ink cartridge
in the wrong position, clean the print head several
times after correcting the cartridge installation.
(See Cleaning the print head in Appendixes B of
the User’s Guide.)
• Once you open an ink cartridge, install it in the
machine and use it up within six months of
installation. Use unopened ink cartridges by the
expiration date written on the cartridge package.
• DO NOT dismantle or tamper with the ink
cartridge, this can cause the ink to leak out of the
cartridge.
• Brother multifunction machines are designed to
work with ink of a particular specification and will
work to a level of optimum performance when
used with genuine Brother branded ink cartridges.
Brother cannot guarantee this optimum
performance if ink or ink cartridges of other
specifications are used. Brother does not
therefore recommend the use of cartridges other
than genuine Brother branded cartridges with this
machine or the refilling of empty cartridges with ink
from other sources. If damage is caused to the
print head or other parts of this machine as a result
of using incompatible products with this machine,
any repairs required as a result may not be
covered by the warranty.
M
brother
Setting Up the Machine
9
6 Print quality check
1After the cleaning cycle is finished, the LCD
shows:
Set Paper and Press
Start
2Make sure A4, Letter or Legal size paper is
loaded in the paper tray.
Press Colour Start.
The machine starts printing the Print Quality
Check Sheet (only during initial ink cartridge
installation).
3Check the quality of the four colour blocks on
the sheet.
(black/ yellow/ cyan/ magenta)
Improper Setup
Avoid touching the printed surface of the
paper immediately after printing, the surface
may not be completely dry and may stain your
fingers.
4The LCD shows:
Is Quality OK?
Yes Press i
No Press i
If all lines are clear and visible, press
(Yes) to finish the quality check.
If you can see missing short lines, press
(No) and go to step 5.
5The LCD asks you if the print quality is OK for
black and colour. Press (Yes
) or (
No).
Black OK?
Yes Press i
No Press i
Color OK?
Yes Press i
No Press i
After pressing (Yes No) or ( ) for both
black and colour, the LCD shows:
Start Cleaning?
Yes Press i
No Press i
6Press (
Yes), the machine will then start
cleaning the colours.
7After cleaning is finished, press Colour Start.
The machine starts printing the Print Quality
Check Sheet again and goes back to step 3.
OK Poor
Setting Up the Machine
10
STEP 1
7 Setting the LCD contrast
You can adjust the LCD contrast for a sharper and
more vivid display. If you are having difficulty reading
the LCD, try changing the contrast setting.
1Press Menu.
2Press a
or
b
to choose
General Setup.
Press OK.
3Press a
or
b
to choose
LCD Settings.
Press OK.
4Press a
or
b
to choose
LCD Contrast.
Press OK.
5Press a
or
b
to choose
Light, Med or Dark.
Press OK.
6Press Stop/Exit.
Note
You can also adjust the angle of the LCD display
by lifting it.
8 Setting the date and time
Setting the date and time allows the machine to clean
the print head regularly and maintain optimum print
quality. It also allows the machine to name files
created when using the Scan to Media feature.
1Press Menu.
2Press a b or to choose Initial Setup,
and then press OK.
3Press a b or to choose Date&Time, and then
press OK.
4Press a b or to enter the last two digits of the
year, and then press OK.
Date&Time
Year:20
07
(e.g. Enter 0 7 for 2007.)
5Press a b or to enter the two digits for the
month, and then press OK.
Date&Time
Month:
03
(e.g. Enter 0 3 for March.)
6Press a b or to enter the two digits for the day,
and then press OK.
Date&Time
Day:
01
(e.g. Enter 0 1 for the first day of the month.)
Setting Up the Machine
11
7Press a
or
b to enter the two digits for the hour
in 24-hour format, and then press to enter
the minutes.
Date&Time
Time:
15:00
(e.g. Enter 1 5 for 15:00.)
8Press a
or
b to enter the two digits for the
minute, and then press OK.
Date&Time
Time:
15:25
(e.g. Enter 1 5 , for 15:25.)2 5
Note
You can increase or decrease the number rapidly
by holding down a or b.
9Press Stop/Exit.
Note
If you make a mistake and want to start again,
press Stop/Exit to go back to step 1.
To confirm the current date and time, print
out the User Settings report. (See Printing
Reports in Chapter 1 of the User's Guide.)
Now go to
Supplied CD-ROM ‘MFL-Pro Suite’ on the next
page to install the drivers.
Supplied CD-ROM ‘MFL-Pro Suite’
12
1
1
Supplied CD-ROM ‘MFL-Pro Suite’
Windows®
Install MFL-Pro Suite
You can install the MFL-Pro Suite software and
multifunction drivers.
Install Other Drivers or Utilities
You can install additional MFL-Pro Suite software
utilities, install without ScanSoft™ PaperPort™ 11SE
with OCR by NUANCE™, install the printer driver only
(DCP-560CN only) or install FaceFilter Studio.
Documentation
View the Software User’s Guide and Network User’s
Guide (DCP-560CN only) in HTML format. You can
also view the manuals in PDF format by accessing the
Brother Solutions Center. The Software User’s Guide
and Network User’s Guide include instructions for
features available when connected to a computer.
(eg. Printing, scanning and networking details)
On-Line Registration
Register your machine from the Brother Product
Registration Page.
Brother Solutions Center
Access the Brother Solutions Center for FAQs, User’s
Guides, driver updates and tips for using your
machine. (Internet access required.)
Supplies Information
View our web site for original/genuine Brother
supplies at http://www.brother.com/original/ .
Repair MFL-Pro Suite (USB only)
If an error occurred during the installation of the
MFL-Pro Suite, use this selection to automatically
repair and re-install the MFL-Pro Suite.
Note
MFL-Pro Suite includes the Printer Driver,
Scanner Driver, Brother ControlCenter3,
ScanSoft™ PaperPort™ 11SE.
ScanSoft™ PaperPort™ 11SE is a document
management application for scanning and viewing
documents.
Macintosh®
Start Here OSX
You can install the MFL-Pro Suite that includes the
printer driver, scanner driver, Brother ControlCenter2
and BRAdmin Light (DCP-560CN only) for Mac OS®
X 10.2.4 or greater.
Presto! PageManager
You can also install Presto!® PageManager® to add
OCR capability to Brother ControlCenter2 and easily
scan, share and organize photos and documents.
For Mac OS® X 10.3.9 or greater users, you can
directly install the software from the included
CD-ROM, follow the steps in Installing the Drivers &
Software.
For Mac OS® X 10.2.4 to 10.3.8 users, you need to
download the software from the Brother Solutions
Center web site. To download, follow the steps in
Installing the Drivers & Software.
Documentation
View the Software User’s Guide and Network User’s
Guide (DCP-560CN only) in HTML format. You can
also view the manuals in PDF format by accessing the
Brother Solutions Center. The Software User’s Guide
and Network User’s Guide include instructions for
features available when connected to a computer.
(eg. Printing, scanning and networking details)
Brother Solutions Center
Access the Brother Solutions Center for FAQs, User’s
Guides, driver updates and tips for using your
machine. (Internet access required.)
On-Line Registration
Register your machine from the Brother Product
Registration Page
.
Utilities
You can find the following additional Utilities from this
folder.
Presto!®PageManager®Uninstaller
BRAdmin Light (DCP-560CN only)
Installing the Driver & Software
13
STEP 2
Follow the instructions on this page for your operating system and interface.
For the latest drivers, documentation, and to find the best solution for your problem, access the Brother Solution Center
directly from the CD-ROM / Driver or visit http://solutions.brother.com.
Windows®
Macintosh®
For USB Interface Users
(For Windows® 2000 Professional/XP/
XP Professional x64 Edition/Windows Vista™) ........................................................... 14
For Network Interface Users (DCP-560CN only)
(For Windows® 2000 Professional/XP/
XP Professional x64 Edition/Windows Vista™) ........................................................... 18
For USB Interface Users
(For Mac OS® X 10.2.4 or greater) ................................................................................. 22
For Network Interface Users (DCP-560CN only)
(For Mac OS® X 10.2.4 or greater) ................................................................................. 25
The screens for Windows® in this Quick Setup Guide are based on Windows® XP.
The screens for Mac OS® X in this Quick Setup Guide are based on Mac OS® X 10.4
Screens on your computer may vary depending on your operating system.
Installing the Driver & Software
14
STEP 2
Windows®
USB
Windows®
1
1
For USB Interface Users
(For Windows
®
2000 Professional/XP/
XP Professional x64 Edition/Windows Vista™)
Important
Make sure that you have finished the
instructions from STEP 1 Setting Up the
Machine on pages 4 through 11.
Note
• The supplied CD-ROM includes ScanSoft™
PaperPort™ 11SE. This software supports
Windows® 2000 (SP4 or greater), XP (SP2 or
greater), XP Professional x64 Edition and
Windows Vista™ only. Please update to the latest
Windows®
Service Pack before installing MFL-Pro
Suite.
• Please close any applications running before
installing MFL-Pro Suite.
• Make sure there are no memory cards or a USB
Flash memory drive inserted into the media drives
or USB direct interface at the front of the machine.
1Disconnect the machine from the power socket
and from your computer, if you already
connected an interface cable.
2Turn on your computer.
You must be logged on with Administrator
rights.
3Put the supplied CD-ROM into your CD-ROM
drive. If the model name screen appears,
choose your machine. If the language screen
appears, choose your language.
4The CD-ROM main menu will appear. Click
Install MFL-Pro Suite.
If this window does not appear, use Windows®
Explorer to run the start.exe program from the
root folder of the Brother CD-ROM.
Note
• If this screen appears, click OK and restart your
computer.
• If the installation does not continue automatically,
open the main menu again by ejecting and then
reinserting the CD-ROM disc or double-click the
start.exe program from the root folder, and
continue from step 4 to install MFL-Pro Suite.
• For Windows Vista™, when the User Account
Control screen appears, click Allow.
Installing the Driver & Software
15
Windows®
USB
Windows®
5After reading and accepting the ScanSoft™
PaperPort™ 11SE License Agreement, click
Yes.
6The installation of ScanSoft™ PaperPort™
11SE will automatically start and is followed by
the installation of MFL-Pro Suite.
7When the Brother MFL-Pro Suite Software
License Agreement window appears, click Yes
if you agree to the Software License
Agreement.
8Choose Standard (DCP-350C) or
Local Connection (DCP-560CN), and then
click Next. The installation continues.
9When this screen appears, go to the next step.
10 Using both hands, use the plastic tabs on both
sides of the machine to lift the scanner cover
until it locks securely into the open position.
11 Connect the USB cable to the USB socket
marked with a symbol. You will find the
USB socket inside the machine as shown
below.
12 Carefully guide the USB cable into the trench
as shown below, following the trench around
and toward the back of the machine. Then,
connect the cable to your computer.
Installing the Driver & Software
16
STEP 2
Windows®
USB
Windows®
Improper Setup
• DO NOT connect the machine to a USB port on
a keyboard or a non-powered USB hub.
Brother recommends that you connect the
machine directly to your computer.
• Make sure that the cable does not restrict the
cover from closing, or an error may occur.
• Make sure you use a USB 2.0 cable that is no
longer than 2 metres.
13 Lift the scanner cover to release the lock .
Gently push the scanner cover support
down and close the scanner cover .
14 Turn on the machine by connecting the power
cord.
The installation of the Brother drivers will
automatically start. The installation screens
appear one after another. Please wait, it will
take a few seconds for all the screens to
appear.
Improper Setup
DO NOT try to cancel any of the screens during
this installation.
15 When the On-Line Registration screen is
displayed, make your selection and follow the
on-screen instructions.
16 Click Finish to restart your computer.
After restarting the computer, you must be
logged on with Administrator rights.
Note
After restarting the computer, the Installation
Diagnostics will run automatically. If the
installation is unsuccessful, the installation results
window will be shown. If the Diagnostics shows a
failure, please follow the on-screen instructions or
read the on-line help and FAQs in
Start/All Programs/Brother/DCP-XXXX.
The MFL-Pro Suite has been installed
completely. Proceed to Installing
FaceFilter Studio on page 17 to install the
FaceFilter Studio application.
Note
MFL-Pro Suite includes the Printer Driver,
Scanner Driver, Brother ControlCenter3,
ScanSoft™ PaperPort™ 11SE.
ScanSoft™ PaperPort™ 11SE is a document
management application for scanning and viewing
documents.
Installing the Driver & Software
17
Windows®
USB
Windows®
Installing FaceFilter Studio
FaceFilter Studio is an easy-to-use borderless photo
printing application. FaceFilter Studio also lets you
edit your photo data and add photo effects such as
red eye reduction or skin tone enhancement.
Important
Before you launch FaceFilter Studio for the
first time, you must confirm MFL-Pro Suite is
installed, your Brother machine is turned ON
and connected to your computer.
17 Open the main menu again by ejecting and
then reinserting the CD-ROM disc or by
double-clicking the start.exe program from the
root folder.
18 The CD-ROM main menu will appear. Click
Install Other Drivers or Utilities.
19 Click the FaceFilter Studio button to install.
20 For information on basic FaceFilter Studio
functions, see Using FaceFilter Studio for
photo printing by REALLUSION in the Software
User’s Guide on the CD-ROM.
For more detailed information, install
FaceFilter Studio Help. See Instructions on
how to install FaceFilter Studio Help (For
Windows® users) on page 30.
Installing the Driver & Software
18
STEP 2
Windows®
Windows®
Network
2
For Network Interface Users (DCP-560CN only)
(For Windows
®
2000 Professional/XP/
XP Professional x64 Edition/Windows Vista™)
Important
Make sure that you have finished the
instructions from STEP 1 Setting Up the
Machine on pages 4 through 11.
Note
• The supplied CD-ROM includes ScanSoft™
PaperPort™ 11SE. This software supports
Windows® 2000 (SP4 or greater), XP (SP2 or
greater), XP Professional x64 Edition and
Windows Vista™ only. Please update to the latest
Windows®
Service Pack before installing MFL-Pro
Suite.
• Please close any applications running before
installing MFL-Pro Suite.
• Make sure there are no memory cards or a USB
Flash memory drive inserted into the media drives
or USB direct interface at the front of the machine.
1Disconnect the machine from the power socket.
2Using both hands, use the plastic tabs on both
sides of the machine to lift the scanner cover
until it locks securely into the open position.
3Connect the network cable to the LAN socket
marked with a symbol. You will find the
LAN socket inside the machine on the left as
shown below.
4Carefully guide the network cable into the
trench as shown below, following the trench
around and toward the back of the machine.
Then, connect the cable to your network.
Improper Setup
Make sure that the cable does not restrict the
cover from closing, or an error may occur.
Note
If both USB and LAN cables are being used, guide
both cables through the trench with one on top of
the other.
5Lift the scanner cover to release the lock .
Gently push the scanner cover support
down and close the scanner cover .
6Turn on the machine by connecting the power
cord.
Installing the Driver & Software
19
Windows®
Windows®
Network
7Turn on your computer.
You must be logged on with Administrator
rights.
Close any applications running before installing
MFL-Pro Suite.
Note
Before installation, if you are using Personal
Firewall software, disable it. After the installation,
restart your Personal Firewall sofware.
8Put the supplied CD-ROM into your CD-ROM
drive. If the model name screen appears,
choose your machine. If the language screen
appears, choose your language.
9The CD-ROM main menu will appear. Click
Install MFL-Pro Suite.
If this window does not appear, use Windows®
Explorer to run the start.exe program from the
root folder of the Brother CD-ROM.
Note
• If this screen appears, click OK and restart your
computer.
• If the installation does not continue automatically,
open the main menu again by ejecting then
reinserting the CD-ROM disc or double-click the
start.exe program from the root folder, and
continue from step 9 to install MFL-Pro Suite.
• For Windows Vista™, when the User Account
Control screen appears, click Allow.
10 After reading and accepting the ScanSoft™
PaperPort™ 11SE License Agreement, click
Yes.
11 The installation of ScanSoft™ PaperPort™
11SE will automatically start and is followed by
the installation of MFL-Pro Suite.
12 When the Brother MFL-Pro Suite Software
License Agreement window appears, click Yes
if you agree to the Software License
Agreement.
13 Choose Network Connection, and then click
Next.
Installing the Driver & Software
20
STEP 2
Windows®
Windows®
Network
14 For Windows® XP SP2/Windows Vista™
users, when this screen appears, choose
Change the Firewall port settings to enable
network connection and continue with the
installation. (Recommended) and click Next.
If you are not using the Windows®
Firewall, see
the User’s Guide for your software for
information on how to add the following
network ports.
For network scanning, add UDP port 54925.
If you still have trouble with your network
connection, add UDP port 137.
Note
• If the machine is configured for your network,
choose the machine from the list, and then click
Next.
This window will not appear if there is only one
machine connected on the network, it will be
chosen automatically.
If your machine shows APIPA in the IP Address
field, click Configure IP Address and enter an IP
address for your machine that is suitable for your
network.
• If the machine is not yet configured for use on your
network, the following screen appears.
Click OK.
The Configure IP Address window
will appear.
Enter an IP address for your machine that is
suitable for your network by following the
on-screen instructions.
15 The installation of the Brother drivers will
automatically start. The installation screens
appear one after another. Please wait, it will
take a few seconds for all the screens to
appear.
Note
For Windows Vista™, when this screen appears,
click the check box and click Install to complete
the installation properly.
Improper Setup
DO NOT try to cancel any of the screens during
this installation.
16 When the On-Line Registration screen is
displayed, make your selection and follow the
on-screen instructions.
17 Click Finish to restart your computer.
After restarting the computer, you must be
logged on with Administrator rights.
Note
After restarting the computer, the Installation
Diagnostics will run automatically. If the
installation is unsuccessful, the installation results
window will be shown. If the Diagnostics shows a
failure, please follow the on-screen instructions or
read the on-line help and FAQ’s in
Start/All Programs/Brother/DCP-XXXX.
Installing the Driver & Software
21
Windows®
Windows®
Network
The MFL-Pro Suite has been installed
completely. Proceed to Installing
FaceFilter Studio on page 21 to install the
FaceFilter Studio application.
Note
MFL-Pro Suite includes the Network Printer
Driver, Network Scanner Driver, Brother
ControlCenter3, ScanSoft™ PaperPort™ 11SE.
ScanSoft™ PaperPort™ 11SE is a document
management application for scanning and viewing
documents.
Installing FaceFilter Studio
FaceFilter Studio is an easy-to-use borderless photo
printing application. FaceFilter Studio also lets you
edit your photo data and add photo effects such as
red eye reduction or skin tone enhancement.
Important
Before you launch FaceFilter Studio for the
first time, you must confirm MFL-Pro Suite is
installed, your Brother machine is turned ON
and connected to your network.
18 Open the main menu again by ejecting and
then reinserting the CD-ROM disc or by
double-clicking the start.exe program from the
root folder.
19 The CD-ROM main menu will appear. Click
Install Other Drivers or Utilities.
20 Click the FaceFilter Studio button to install.
21 For information on basic FaceFilter Studio
functions, see Using FaceFilter Studio for
photo printing by REALLUSION in the Software
User’s Guide on the CD-ROM.
For more detailed information, install
FaceFilter Studio Help. See Instructions on
how to install FaceFilter Studio Help (For
Windows® users) on page 30.
Installing the Driver & Software
22
STEP 2
Macintosh®
Macintosh®
USB
3
For USB Interface Users
(For Mac OS
®
X 10.2.4 or greater)
Important
Make sure that you have finished the
instructions from STEP 1 Setting Up the
Machine on pages 4 through 11.
Note
• For Mac OS® X 10.2.0 to 10.2.3 users, upgrade to
Mac OS® X 10.2.4 or greater. (For the latest
information for Mac OS® X, visit
http://solutions.brother.com)
• Make sure there are no memory cards or a USB
Flash memory drive inserted into the media drives
or USB direct interface at the front of the machine.
1Using both hands, use the plastic tabs on both
sides of the machine to lift the scanner cover
until it locks securely into the open position.
2Connect the USB cable to the USB socket
marked with a symbol. You will find the
USB socket inside the machine as shown
below.
3Carefully guide the USB cable into the trench
as shown below, following the trench around
and toward the back of the machine.
Then, connect the cable to your Macintosh®.
Improper Setup
• DO NOT connect the machine to a USB port on
a keyboard or a non-powered USB hub.
Brother recommends that you connect the
machine directly to your Macintosh®.
• Make sure that the cable does not restrict the
cover from closing, or an error may occur.
• Make sure you use a USB 2.0 cable that is no
longer than 2 metres.
4Lift the scanner cover to release the lock .
Gently push the scanner cover support
down and close the scanner cover .
Note
Make sure that the machine is turned on by
connecting the power cord.
Installing the Driver & Software
23
Macintosh®
Macintosh®
USB
5Turn on your Macintosh®.
6Put the supplied CD-ROM into your CD-ROM
drive.
7Double-click the Start Here OSX icon to install.
Follow the on-screen instructions.
Note
Please wait, it will take a few seconds for the
software to install. After the installation, click
Restart to finish installing the software.
8The Brother software will search for the Brother
device. During this time the following screen
will appear.
9When this screen appears, click OK.
For Mac OS® X 10.3.x or greater users:
The MFL-Pro Suite, Brother printer driver,
scanner driver and Brother
ControlCenter2 have been installed and
the installation is now complete.
Go to step 14
14
14
1414.
10 For Mac OS® X 10.2.4 to 10.2.8 users:
Click Add.
11 Choose USB.
12 Choose DCP-XXXX (where XXXX is your
model name), and then click Add.
13 Click Print Center, then Quit Print Center.
The MFL-Pro Suite, Brother printer driver,
scanner driver and Brother
ControlCenter2 have been installed and
the installation is now complete.
Installing the Driver & Software
24
STEP 2
Macintosh®
Macintosh®
USB
14 To install Presto!® PageManager®,
double-click the icon Presto! PageManager
and follow the on-screen instructions.
For Mac OS® X 10.2.4 to 10.3.8 users:
When this screen appears, click Go to
download the software from the Brother
Solutions Center web site.
Note
When Presto!® PageManager® is installed OCR
capability is added to Brother ControlCenter2. You
can easily scan, share and organize photos and
documents using Presto!® PageManager®.
Presto!® PageManager® has been
installed and the installation is now
complete.
Installing the Driver & Software
25
Macintosh®
Macintosh®
Network
4
For Network Interface Users (DCP-560CN only)
(For Mac OS
®
X 10.2.4 or greater)
Important
Make sure that you have finished the
instructions from STEP 1 Setting Up the
Machine on pages 4 through 11.
Note
• For Mac OS® X 10.2.0 to 10.2.3 users, upgrade to
Mac OS® X 10.2.4 or greater. (For the latest
information for Mac OS® X, visit
http://solutions.brother.com )
• Make sure there are no memory cards or a USB
Flash memory drive inserted into the media drives
or USB direct interface at the front of the machine.
1Using both hands, use the plastic tabs on both
sides of the machine to lift the scanner cover
until it locks securely into the open position.
2Connect the network cable to the LAN socket
marked with a symbol. You will find the
LAN socket inside the machine on the left as
shown below.
3Carefully guide the network cable to the trench
as shown below, following the trench around
and toward the back of the machine.
Then, connect the cable to your network.
Improper Setup
Make sure that the cable does not restrict the
cover from closing, or an error may occur.
Note
If both USB and LAN cables are being used, guide
both cables through the trench with one on top of
the other.
4Lift the scanner cover to release the lock .
Gently push the scanner cover support
down and close the scanner cover .
Note
Make sure that the machine is turned on by
connecting the power cord.
5Turn on your Macintosh®.
Installing the Driver & Software
26
STEP 2
Macintosh®
Macintosh®
Network
6Put the supplied CD-ROM into your CD-ROM
drive.
7Double-click the Start Here OSX icon to install.
Follow the on-screen instructions.
Please wait, it will take a few seconds for the
software to install. After the installation, click
Restart to finish installing the software.
8The Brother software will search for the Brother
device. During this time the following screen
will appear.
Note
• If the machine is configured for your network,
choose the machine from the list, and then click
OK. This window will not appear if there is only one
machine connected on the network, it will be
chosen automatically. Go to step 9.
• If this screen appears click OK.
Enter a name for your Macintosh® in
Display Name up to 15 characters long and click
OK. Go to step 9.
• If you want to use the machine’s Scan key to scan
over the network you must check the Register
your computer with the “Scan To” function on
the machine box.
• The name you enter will appear on the machine’s
LCD when you press the Scan key and choose a
scan option. (For more information, see Network
Scanning in the Software User’s Guide on the
CD-ROM.)
9When this screen appears, click OK.
For Mac OS® X 10.3.x or greater users:
The MFL-Pro Suite, Brother printer driver,
scanner driver and Brother
ControlCenter2 have been installed and
the installation is now complete.
Go to step 14
14
14
1414.
10 For Mac OS® X 10.2.4 to 10.2.8 users:
Click Add.
Installing the Driver & Software
27
Macintosh®
Macintosh®
Network
11 Make the selection shown below.
12 Choose DCP-XXXX (where XXXX is your
model name), and then click Add.
13 Click Print Center, then Quit Print Center.
The MFL-Pro Suite, Brother printer driver,
scanner driver and Brother
ControlCenter2 have been installed and
the installation is now complete.
14 To install Presto!® PageManager®,
double-click the Presto! PageManager icon
and follow the on-screen instructions.
For Mac OS® X 10.2.4 to 10.3.8 users:
When this screen appears, click Go to
download the software from the Brother
Solutions Center web site.
Note
When Presto!® PageManager® is installed OCR
capability is added to Brother ControlCenter2. You
can easily scan, share and organize photos and
documents using Presto!® PageManager®.
Presto!® PageManager® has been
installed and the installation is now
complete.
For Network Users
28
1
1
BRAdmin Light utility (For Windows
®
users)
The BRAdmin Light is a utility for initial setup of Brother network connected devices. It also can search for Brother
products on your network, view the status and configure basic network settings, such as IP address.
For more information on BRAdmin Light, visit us at http://solutions.brother.com.
Note
If you require more advanced printer management, use the latest Brother BRAdmin Professional utility version
that is available as a download from http://solutions.brother.com.
Installing the BRAdmin Light
configuration utility
1Click Install Other Drivers or Utilities on the
menu screen.
2Click BRAdmin Light and follow the on-screen
instructions.
Setting your IP address, Subnet
Mask and Gateway using BRAdmin
Light
Note
If you have a DHCP/BOOTP/RARP server in your
network, you don’t have to do the following
operation. Because the print server will
automatically obtain its IP address.
1Start BRAdmin Light. It will search for new
devices automatically.
2Double-click the unconfigured device.
3Choose STATIC for the
Boot Method. Enter
the IP Address, Subnet Mask and Gateway,
and then click OK.
4The address information will be saved to the
machine.
Produkt Specifikationer
| Mærke: | Brother |
| Kategori: | Printer |
| Model: | DCP-353C |
Har du brug for hjælp?
Hvis du har brug for hjælp til Brother DCP-353C stil et spørgsmål nedenfor, og andre brugere vil svare dig
Printer Brother Manualer
9 Marts 2025
9 Marts 2025
13 Januar 2025
5 Januar 2025
29 December 2024
13 December 2024
13 December 2024
13 December 2024
13 December 2024
13 December 2024
Printer Manualer
- Printer Nilox
- Printer Sony
- Printer Canon
- Printer Samsung
- Printer Panasonic
- Printer LG
- Printer Mitsubishi
- Printer Sharp
- Printer Lexmark
- Printer Epson
- Printer HP
- Printer D-Link
- Printer Roland
- Printer Toshiba
- Printer Fujifilm
- Printer Nikon
- Printer Kodak
- Printer Lenovo
- Printer Olympus
- Printer Triumph-Adler
- Printer AVM
- Printer Dymo
- Printer Thomson
- Printer JVC
- Printer Honeywell
- Printer Citizen
- Printer Olivetti
- Printer Huawei
- Printer Seiko
- Printer Digitus
- Printer Zebra
- Printer Olympia
- Printer Xiaomi
- Printer Dell
- Printer Intermec
- Printer Fujitsu
- Printer MSI
- Printer Polaroid
- Printer Ricoh
- Printer NEC
- Printer Konica-Minolta
- Printer OKI
- Printer Kyocera
- Printer Avision
- Printer Velleman
- Printer Bixolon
- Printer Sagem
- Printer Pantum
- Printer Xerox
- Printer Renkforce
- Printer Testo
- Printer Ultimaker
- Printer Primera
- Printer Star Micronics
- Printer Star
- Printer Panduit
- Printer ZKTeco
- Printer StarTech.com
- Printer Kogan
- Printer CUSTOM
- Printer Godex
- Printer Equip
- Printer Royal Sovereign
- Printer Argox
- Printer Minolta
- Printer DNP
- Printer Oce
- Printer Metapace
- Printer Ibm
- Printer Tomy
- Printer Approx
- Printer Toshiba TEC
- Printer Frama
- Printer Vupoint Solutions
- Printer Evolis
- Printer Builder
- Printer Fargo
- Printer Brady
- Printer Posiflex
- Printer Datamax-O'neil
- Printer Dascom
- Printer HiTi
- Printer GG Image
- Printer Elite Screens
- Printer DTRONIC
- Printer Phoenix Contact
- Printer Videology
- Printer TSC
- Printer EC Line
- Printer Colop
- Printer Fichero
- Printer Raspberry Pi
- Printer Unitech
- Printer IDP
- Printer Microboards
- Printer Tally Dascom
- Printer CSL
- Printer Nisca
- Printer Epson 7620
- Printer Sawgrass
- Printer Mimaki
Nyeste Printer Manualer
2 April 2025
29 Marts 2025
29 Marts 2025
29 Marts 2025
5 Marts 2025
5 Marts 2025
5 Marts 2025
4 Marts 2025
26 Februar 2025
26 Februar 2025