Brother GL100 Manual
Læs nedenfor 📖 manual på dansk for Brother GL100 (1 sider) i kategorien Printer. Denne guide var nyttig for 18 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere
Side 1/1
User's Guide
/ Italiano
www.brother.com
LW8990001
Printed in China
English
INTRODUCTION
With your GL100, you can create labels for any application. Select from the many frames, character
sizes and styles to design beautiful custom labels. In addition, the variety of tape cartridges available
allows you to print labels with different widths and exciting colours.
Read this manual carefully before starting and keep the manual in a handy place for future reference.
Declaration of Conformity
(Europe/Turkey only)
We, BROTHER INDUSTRIES, LTD.
15-1, Naeshiro-cho, Mizuho-ku,
Nagoya, 467-8561, Japan
declare that this product is in compliance with the essential requirements and other relevant
provisions of Directives 2004/108/EC and 2005/32/EC.
The Adapter AD-24ES is in compliance with the essential requirements and other relevant
provisions of Directive 2006/95/EC.
The Declaration of Conformity (DoC) is on our Web site. Please go to
http://solutions.brother.com -> choose region (eg. Europe) -> choose country -> choose your
model -> choose "Manuals"-> choose Declaration of Conformity (*Select Language when
required).
GENERAL PRECAUTIONS
• Use only Brother TZ/TZe tapes with this machine. Do not use tapes that do not
have the mark.
• Do not pull on the tape being fed from the P-touch, otherwise the tape cassette
may be damaged.
• Do not attempt to cut the tape while printing or feeding since this will damage the tape.
• Do not clean the machine with alcohol or other organic solvents. Only use a soft, dry
cloth.
• Remove the batteries and disconnect the AC adapter if you do not intend to use the
machine for an extended period of time.
Note: If power is disconnected for more than three minutes, all text shown in the
display and any text files stored in the memory will be lost. Language and unit
settings will also be cleared.
• Do not put any foreign objects into or heavy objects on the machine.
• Do not expose the machine to extremely high temperatures or high humidity. Never
leave it on the dashboard or in the back of your car.
• Avoid using the machine in extremely dusty places. Keep it out of both direct sunlight
and rain.
• Do not leave any rubber or vinyl on the machine for an extended period of time,
otherwise the machine may be stained.
• Do not touch the print head mechanism. If the head is touched, clean it immediately
with a soft wipe (e.g. a cotton swab) to avoid permanent damage.
• To avoid injuries, do not touch the cutter's edge.
• Use only the AC adapter designed exclusively for this machine. Use of any
other adapter may void the warranty.
• Please contact your Brother dealer for details.
SPECIFICATIONS
Dimensions: 108 mm (W) ✕ ✕ 196 mm (D) 55 mm (H)
Weight: 335 g (without batteries and tape cassette)
Power supply: Six AAA alkaline batteries (LR03) or AC adapter (AD-24ES)
Tape cassette: Brother TZ/TZe tape
6 mm / 9 mm / 12 mm (width)
Cutter unit: TC-5 (replacement)
POWER SUPPLY & TAPE CASSETTES
1Remove the back cover by pressing in the rough area at the top end of the machine.
If a tape cassette is already installed, remove it by pulling it straight up. Also, if batteries are
already installed, remove them.
2-1 Insert six new AAA-size (LR03) alkaline batteries, with the +/- terminals positioned as
shown in diagram 2-1.
Always replace all six batteries at the same time using brand new ones.
2-2 Insert a tape cassette, making sure that it
snaps into place.
• Make sure that the end of the tape feeds under
the tape guides.
• Be sure to remove the paper tab when install-
ing a new tape cassette.
• If the ink ribbon is loose, use your finger to
wind the toothed wheel in the direction of the
arrow on the cassette.
• Use only Brother TZ/TZe tapes with this
machine.
3Attach the back cover by inserting the two hooks at the bottom into the slots on the
machine, then pushing down firmly on the cover until it snaps into place.
After you have installed the tape, feed the tape (see FEEDING) once and then push in the
tape cutter lever to cut the tape.
AC adapter (AD-24ES)
1Insert the plug on the adapter cord into the
adapter jack on the bottom end of the
machine.
2Insert the plug into the nearest standard
electrical outlet.
Cutter unit (replacement)
If the cutter blade becomes blunt after repetitive use and the tape can not be cut
cleanly, replace with new cutter unit (stock no. TC-5) by obtaining from an authorized
brother dealer.
Tape cutter lever
Tape exit slot
Print head
Cutter unit
GETTING STARTED
1Start your machine
Supply power by using six AAA alkaline batteries or the AC adapter,
and then press a.
2Set the language (English/French/German)
Choose a language with b and press e.
Check the display and press e d. (To cancel, press .)
3Set the unit (mm/inch)
Choose a unit with b and press e.
Check the display and press e d. (To cancel, press .)
NOTE: You can also display the languages and units by pressing the cor-
responding Num keys (1-3).
NOTE:
• To cancel operations, press d.
• To delete entries backward, press d.
•To initialize the settings, turn off the machine and then while holding
down fand d, press ato turn the machine back on.
Finally, release fand d.
MAKING TEXT
Switching UPPER CASE/LOWER CASE
"j
Upper case Lower case
Making TWO LINE TEXT
Move the cursor to where the second line starts and press e.
NOTE: Use either 9 mm or 12 mm wide tape for two line texts.
Display Label image
Entering SYMBOLS
"h > B > b > e
NOTE: • You can also display the symbols by pressing h / b.
•To go to the next group, press h.
•To skip to a different group, press the corresponding character key of the group.
•You can also scroll the symbols in each group by pressing the corresponding character
key of the group repeatedly.
Group Symbols SymbolsGroup
A F
B G
C H
D I
E
ABC
abc
ABC
abc
ABC
DEF
Entering ACCENTED CHARACTERS
"g > E > b > e
NOTE: • You can also display the characters by pressing g b / .
•To go to the next letter group, press g.
•To skip to a different letter group, press the corresponding
character key.
•You can also scroll the characters in each letter group by pressing
the corresponding character key repeatedly.
Letter
Accented characters
Letter
Accented characters
A a
C c
D d
E e
I i
L l
N n
O o
R r
S s
T t
U u
Y y
Z z
DESIGNING LABELS
Setting FONT (f 1+ )
"f > f/b > e > f/b > e
HELSINKI OKLAHOMA
Setting SIZE (f 2+ )
"f > f/b > e > f/b > e
AUTO automatically adjusts the text size according to the tape width.
SIZE1 SIZE2 SIZE3
SIZE4 SIZE5
NOTE: • Two line texts are printed in SIZE1 regardless of the setting.
•Only AUTO, SIZE1 and SIZE2 can be used on 6mm tapes.
Setting STYLE (f 3+ )
"f > f/b > e > f/b > e
NORMAL BOLD OUTLINE SHADOW
ITALIC I+BOLD (ITALIC + BOLD) I+OUTL (ITALIC + OUTLINE)
I+SHADOW (
ITALIC + SHADOW
)VERTICAL MIRROR
NOTE: • Two line texts are printed in NORMAL regardless of the setting.
•Use clear tape in MIRROR, so the labels appear on the other side when stuck on glass,
windows or other transparent surfaces.
Setting UNDERLINE/FRAME (f 4+ )
"f > f/b > e > f/b > e
OFF UNDL (Underline) ROUND
BANNER WOODEN VINE
NOTE: No underline or frame is set to texts in VERTICAL style.
Setting TAB (f+ )5
You can make aligned texts by setting tabs.
Example: To set a tab between “abc” and “d”
"b > f > f/b > e
Label image
NOTE: The cursor should be positioned where you set a tab.
Setting TAB LENGTH (0 - 100mm) ( + )f 6
"f > > e > b > e f/b
NOTE: You can also select the length by entering the length with Num keys.
Setting LABEL LENGTH
(AUTO/40 - 300mm)
( + )f 7
"f > > e > b > e f/b
NOTE: • You can also select the length by entering the length with Num keys.
•To return to AUTO, press any alphabet key or i.
Using AUTO FORMAT (f 8+ )
You can choose label length from six formats to create labels for various ap-
plications.
"f > f/b > e > f/b > e
To CLEAR (f 0+ )
All text and settings will be cleared.
"f > > e f/b
Tab
abc d
LCD Application Length LCD Application Length
VCR VHS
VCR VHS 140mm
FILE TAB
File Tab 70mm
FD 3.5" 3.5" Floppy Disk 68mm AUDIO Audio Cassette 89mm
CD CASE
CD 100mm VIDEO 8 VCR 8mm (Video 8) 92mm
PRINTING
TEXT PREVIEW (f c+ )
You can preview the text before printing.
"f > > e f/b
NOTE: • The LCD shows the whole text and the label length (mm/inch), then returns to the original
text.
•Only the text can be previewed, but not the font, style, size, underline/frame or any addi-
tional features.
FEEDING (TAPE FEED) (f i+ )
"f > > e f/b
PRINTING
"c
NOTE: • To cut off the label, push in the tape cutter lever on the upper-right corner of the machine.
•To prevent damage to the tape, do not try to cut while the message PRINT or FEED is
displayed.
TAPE MARGIN (f .+ )
"f > f/b > e > f/b > e
FULL/HALF/NARROW is for leaving equal margins on both sides of the text.
NOTE: Cut along the printed dots (:) with scissors so the text is centred in the label.
FULL HALF NARROW
CHAIN is for printing more than 1 copy of a label with minimum margin
<e.g. 1>. You can also create a label containing texts in various styles; print
a text in one style, and before feeding, enter the second text in another style
<e.g. 2>.
NOTE: FEED THE TAPE BEFORE USING THE CUTTER (see FEEDING/PRINTING). Otherwise
A PART OF THE TEXT MAY BE CUT OFF. Do not try to pull the tape since this may
damage the tape cassette.
CHAIN
<e.g. 1> <e.g. 2>
Print Option/REPEAT PRINTING (f ,+ )
You can print up to 9 copies of each label.
"f > f/b > e > f/b >
e > > e f/b
NOTE: • When the tape margin is set to CHAIN, FEED THE TAPE BEFORE USING THE CUTTER
(see FEEDING/PRINTING). Otherwise A PART OF THE TEXT MAY BE CUT OFF. Do
not try to pull the tape since this may damage the tape cassette.
•When the tape margin is set to FULL/HALF/NARROW, cut along the printed dots (:) with
scissors to separate the labels.
Print Option/NUMBERING (f ,+ )
You can print many copies of the same text while increasing a selected
number by 1 after each label is printed.
Example: To print copies of a label containing a serial number (0123, 0124 and 0125)
"b > f > > e > f/b
f/b > e > f/b
> e
NOTE: • The last number that will be printed must be larger than the number selected in the text,
otherwise the message ERROR appears.
•When the tape margin is set to CHAIN, FEED THE TAPE BEFORE USING THE CUTTER
(see FEEDING/PRINTING). Otherwise A PART OF THE TEXT MAY BE CUT OFF. Do
not try to pull the tape since this may damage the tape cassette.
•When the tape margin is set to FULL/HALF/NARROW, cut along the printed dots (:) with
scissors to separate the labels.
25mm 25mm
12mm 12mm
4mm 4mm
(feed & cut)
ABCABCABC
(feed & cut)
ABC ABC
DEF
MEMORY ( + )F 9
You can store up to 9 frequently used text files and recall them to create labels more
quickly and easily.
"f > > e > f/b
To STORE;
"f/b > e > b > e
To RECALL;
"f/b > e > b > e
To DELETE;
"f/b > e > b > e
NOTE: • When the memory is full, delete one or more files and then store the new file.
•You can also choose a file number by pressing the corresponding Num key (1-9).
FUNCTION SHORTCUTS (F+...)
In addition to the basic steps to search for a function, GL100 provides you with function
shortcuts so you can easily jump to a frequently used function just by pressing f and the
shortcut key shown in the table below. To confirm, press e (or the shortcut key again).
NOTE: • PRINT OP contains two functions, REPEAT PRINTING and NUMBERING.
•For PREVIEW and FEED, press e to preview/feed after the LCD message appears.
Key
LCD message
Function
Key
LCD message
Function
1FONT Character font 8A/F Auto Format
2SIZE Character size 9MEMORY Memory
3STYLE Print style 0CLEAR Clear text + style
4UNDL/FRM Underline/Frame .MARGIN Tape margin
5TAB Tab setting ,PRINT OP Repeat/Numbering
6TAB LEN Tab length cPREVIEW Text preview
7LENGTH Label length iFEED Tape feed
NOTE: You can also refer to the chart indicated on the back of the machine.
ERROR MESSAGE LIST
TROUBLESHOOTING
ERROR An error occurred.
BATTERY The batteries are weak.
B A T Y T E R The batteries are empty.
FULL The maximum number of characters (55 characters)
have already been entered or the memory is full.
LONG TXT The text length exceeds the selected label length.
Problem Solution
The display stays blank after you
have turned on the machine.
• Check that the batteries are correctly inserted.
• If the batteries are weak, replace them.
• Check that the adapter is correctly connected.
The machine does not print, or the
printed characters are blurred.
• Check that the tape cassette has been inserted
correctly.
• If the tape cassette is empty, replace it.
• Check that the character size is appropriate for the
width of the tape that is used.
The printed characters are not
formed properly.
• If the batteries are weak, replace them.
Striped tape appears. • The tape cassette is empty. Replace it.
The memory has cleared on its own. • The batteries may be weak. Replace them.
A blank horizontal line appears
through the printed label.
• There may be some dust on the print head.
Remove the tape cassette and use a dry cotton
swab to gently wipe the print head with an up-and-
down motion.
• The print head can be cleaned more easily if the
optional print head cleaning cassette (TZ/TZe-CL3)
is used.
The machine has “locked up” (i.e.,
nothing happens when a key is
pressed, even though the machine is
on).
• Turn off the machine, and then while holding down
f d a and , press to turn the machine back
on. Finally, release
f d and .
Note: The text and formats in the display and all
text files stored in the memory are erased.
Also, the language and unit settings will be
cleared.
Print key
Function key
Enter key
Backspace key
Caps key
Space key
LCD indicators
Power key
Cursor key
Num keys/Function shortcuts
Character keys
Accent key
Symbol key
Function
Style
Upper case/Lower case Cursor
Size
Underline/Frame
KEYBOARD & LCD
The LCD shows one row of 8 characters; however,
the text that you enter can be up to 55 characters in length.
Power On/Off
Press a to turn on/off the machine.
The machine automatically turns off if no key is pressed
within 5 minutes.
Produkt Specifikationer
| Mærke: | Brother |
| Kategori: | Printer |
| Model: | GL100 |
Har du brug for hjælp?
Hvis du har brug for hjælp til Brother GL100 stil et spørgsmål nedenfor, og andre brugere vil svare dig
Printer Brother Manualer
11 November 2024
11 November 2024
11 November 2024
9 Oktober 2024
7 Oktober 2024
3 Oktober 2024
2 Oktober 2024
29 September 2024
28 September 2024
16 September 2024
Printer Manualer
- Printer Nilox
- Printer Sony
- Printer Canon
- Printer Samsung
- Printer Panasonic
- Printer LG
- Printer Mitsubishi
- Printer Sharp
- Printer Lexmark
- Printer Epson
- Printer HP
- Printer D-Link
- Printer Roland
- Printer Toshiba
- Printer Fujifilm
- Printer Nikon
- Printer Kodak
- Printer Lenovo
- Printer Olympus
- Printer Triumph-Adler
- Printer Dymo
- Printer Thomson
- Printer JVC
- Printer Honeywell
- Printer Citizen
- Printer Olivetti
- Printer Huawei
- Printer Seiko
- Printer Digitus
- Printer Zebra
- Printer Olympia
- Printer Xiaomi
- Printer Dell
- Printer Intermec
- Printer Fujitsu
- Printer MSI
- Printer Polaroid
- Printer Ricoh
- Printer NEC
- Printer Konica-Minolta
- Printer OKI
- Printer Kyocera
- Printer Velleman
- Printer Bixolon
- Printer Sagem
- Printer Pantum
- Printer Xerox
- Printer Renkforce
- Printer Testo
- Printer Ultimaker
- Printer Primera
- Printer Star Micronics
- Printer Star
- Printer Panduit
- Printer ZKTeco
- Printer StarTech.com
- Printer Kogan
- Printer CUSTOM
- Printer Godex
- Printer Equip
- Printer Royal Sovereign
- Printer Argox
- Printer Minolta
- Printer DNP
- Printer Oce
- Printer Metapace
- Printer Ibm
- Printer Tomy
- Printer Approx
- Printer Toshiba TEC
- Printer Frama
- Printer Vupoint Solutions
- Printer Evolis
- Printer Builder
- Printer Fargo
- Printer Brady
- Printer Posiflex
- Printer Datamax-O'neil
- Printer Dascom
- Printer HiTi
- Printer GG Image
- Printer Elite Screens
- Printer DTRONIC
- Printer Phoenix Contact
- Printer TSC
- Printer EC Line
- Printer Colop
- Printer Fichero
- Printer Raspberry Pi
- Printer IDP
- Printer Microboards
- Printer Tally Dascom
- Printer CSL
- Printer Nisca
- Printer Epson 7620
Nyeste Printer Manualer
15 November 2024
14 November 2024
13 November 2024
22 Oktober 2024
22 Oktober 2024
15 Oktober 2024
15 Oktober 2024
15 Oktober 2024
14 Oktober 2024
14 Oktober 2024